Open
Description
Description
MPU doesn't work on cortex-m0+.
Initially it was enabled for stm32g0 and was resulting in the following problems:
Context switching is broken in master on stm32g0 CPUs (cortex-m0+). Every switch to the idle thread triggers an hard fault:
examples/hello_world
2020-08-21 14:20:23,397 # main(): This is RIOT! (Version: 2020.10-devel-888-g0b639)
2020-08-21 14:20:23,398 # Hello World!
2020-08-21 14:20:23,402 # You are running RIOT on a(n) nucleo-g070rb board.
2020-08-21 14:20:23,405 # This board features a(n) stm32 MCU.
2020-08-21 14:20:23,406 #
2020-08-21 14:20:23,408 # Context before hardfault:
examples/default
2020-08-21 14:22:40,262 # main(): This is RIOT! (Version: 2020.10-devel-888-g0b639)
2020-08-21 14:22:40,263 # Welcome to RIOT!
> 2020-08-21 14:22:40,263 #
2020-08-21 14:22:40,266 # Context before hardfault:
tests/thread_flags
2020-08-21 14:23:47,476 # Help: Press s to start test, r to print it is ready
2020-08-21 14:23:47,477 #
2020-08-21 14:23:47,479 # Context before hardfault:
All these applications were working when the support was introduced in #14163.
Bisecting shows that the commit introducing the regression is 43d6c41 from #14355. So it seems that it's rather an issue with MPU although the STM32G0 family provides that feature.
@bergzand @kaspar030, any idea what could be the problem ?
Steps to reproduce the issue
Just build and flash examples/hello-world and you'll get the following output:
make BOARD=nucleo-g070rb -C examples/hello-world flash term --no-print-directory
Building application "hello-world" for "nucleo-g070rb" with MCU "stm32".
"make" -C /work/riot/RIOT/pkg/stm32cmsis
"make" -C /work/riot/RIOT/boards/nucleo-g070rb
"make" -C /work/riot/RIOT/boards/common/nucleo
"make" -C /work/riot/RIOT/core
"make" -C /work/riot/RIOT/cpu/stm32
"make" -C /work/riot/RIOT/cpu/cortexm_common
"make" -C /work/riot/RIOT/cpu/cortexm_common/periph
"make" -C /work/riot/RIOT/cpu/stm32/bootloader
"make" -C /work/riot/RIOT/cpu/stm32/periph
"make" -C /work/riot/RIOT/cpu/stm32/stmclk
"make" -C /work/riot/RIOT/cpu/stm32/vectors
"make" -C /work/riot/RIOT/drivers
"make" -C /work/riot/RIOT/drivers/periph_common
"make" -C /work/riot/RIOT/sys
"make" -C /work/riot/RIOT/sys/auto_init
"make" -C /work/riot/RIOT/sys/newlib_syscalls_default
"make" -C /work/riot/RIOT/sys/pm_layered
"make" -C /work/riot/RIOT/sys/stdio_uart
text data bss dec hex filename
8484 112 2568 11164 2b9c /work/riot/RIOT/examples/hello-world/bin/nucleo-g070rb/hello-world.elf
/work/riot/RIOT/dist/tools/openocd/openocd.sh flash /work/riot/RIOT/examples/hello-world/bin/nucleo-g070rb/hello-world.elf
### Flashing Target ###
Open On-Chip Debugger 0.10.0+dev-01383-gd46f28c2e-dirty (2020-08-20-10:53)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
WARNING: interface/stlink-v2-1.cfg is deprecated, please switch to interface/stlink.cfg
hla_swd
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
srst_only separate srst_nogate srst_open_drain connect_assert_srst
Info : clock speed 2000 kHz
Info : STLINK V2J31M21 (API v2) VID:PID 0483:374B
Info : Target voltage: 3.226076
Info : stm32g0x.cpu: hardware has 4 breakpoints, 2 watchpoints
Info : starting gdb server for stm32g0x.cpu on 0
Info : Listening on port 42317 for gdb connections
TargetName Type Endian TapName State
-- ------------------ ---------- ------ ------------------ ------------
0* stm32g0x.cpu hla_target little stm32g0x.cpu reset
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
target halted due to debug-request, current mode: Thread
xPSR: 0xf1000000 pc: 0x08000494 msp: 0x20000200
Info : device idcode = 0x20006460 (STM32G07/G08xx - Rev: B)
Info : flash size = 128kbytes
Info : flash mode : single-bank
Info : Padding image section 1 at 0x08002194 with 4 bytes (bank write end alignment)
Warn : Adding extra erase range, 0x08002198 .. 0x080027ff
auto erase enabled
wrote 8600 bytes from file /work/riot/RIOT/examples/hello-world/bin/nucleo-g070rb/hello-world.elf in 0.274143s (30.635 KiB/s)
verified 8596 bytes in 0.070788s (118.587 KiB/s)
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
shutdown command invoked
Done flashing
/work/riot/RIOT/dist/tools/pyterm/pyterm -p "/dev/ttyACM0" -b "115200"
Twisted not available, please install it if you want to use pyterm's JSON capabilities
2020-08-21 14:20:20,915 # Connect to serial port /dev/ttyACM0
Welcome to pyterm!
Type '/exit' to exit.
2020-08-21 14:20:23,397 # main(): This is RIOT! (Version: 2020.10-devel-888-g0b639)
2020-08-21 14:20:23,398 # Hello World!
2020-08-21 14:20:23,402 # You are running RIOT on a(n) nucleo-g070rb board.
2020-08-21 14:20:23,405 # This board features a(n) stm32 MCU.
2020-08-21 14:20:23,406 #
2020-08-21 14:20:23,408 # Context before hardfault:
2020-08-21 14:20:24,488 # Exiting Pyterm
Expected results
Applications work
Actual results
All applications trigger an hard fault
Versions
make print-versions
Operating System Environment
----------------------------
Operating System: "Ubuntu" "20.04.1 LTS (Focal Fossa)"
Kernel: Linux 5.4.0-42-generic x86_64 x86_64
System shell: /usr/bin/dash (probably dash)
make's shell: /usr/bin/dash (probably dash)
Installed compiler toolchains
-----------------------------
native gcc: gcc (Ubuntu 9.3.0-10ubuntu2) 9.3.0
arm-none-eabi-gcc: arm-none-eabi-gcc (GNU Tools for Arm Embedded Processors 9-2019-q4-major) 9.2.1 20191025 (release) [ARM/arm-9-branch revision 277599]
avr-gcc: avr-gcc (AVR_8_bit_GNU_Toolchain_3.6.2_1759) 5.4.0
mips-mti-elf-gcc: mips-mti-elf-gcc (Codescape GNU Tools 2016.05-03 for MIPS MTI Bare Metal) 4.9.2
msp430-elf-gcc: missing
riscv-none-embed-gcc: riscv-none-embed-gcc (GNU MCU Eclipse RISC-V Embedded GCC, 64-bit) 8.2.0
xtensa-esp32-elf-gcc: missing
xtensa-esp8266-elf-gcc: missing
clang: clang version 10.0.0-4ubuntu1
Installed compiler libs
-----------------------
arm-none-eabi-newlib: "3.1.0"
mips-mti-elf-newlib: "2.1.0"
msp430-elf-newlib: missing
riscv-none-embed-newlib: "3.0.0"
xtensa-esp32-elf-newlib: missing
xtensa-esp8266-elf-newlib: missing
avr-libc: "2.0.0" ("20150208")
Installed development tools
---------------------------
ccache: ccache version 3.7.7
cmake: cmake version 3.16.3
cppcheck: Cppcheck 1.90
doxygen: 1.8.17
git: git version 2.25.1
make: GNU Make 4.2.1
openocd: Open On-Chip Debugger 0.10.0+dev-01383-gd46f28c2e-dirty (2020-08-20-10:53)
python: Python 3.8.2
python2: Python 2.7.18rc1
python3: Python 3.8.2
flake8: 3.7.9 (mccabe: 0.6.1, pycodestyle: 2.5.0, pyflakes: 2.1.1) CPython 3.8.2 on Linux
coccinelle: missing