Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upst…

…ream-linus Pull MIPS updates from Ralf Baechle: o Add basic support for the Mediatek/Ralink Wireless SoC family. o The Qualcomm Atheros platform is extended by support for the new QCA955X SoC series as well as a bunch of patches that get the code ready for OF support. o Lantiq and BCM47XX platform have a few improvements and bug fixes. o MIPS has sent a few patches that get the kernel ready for the upcoming microMIPS support. o The rest of the series is made up of small bug fixes and cleanups that relate to various parts of the MIPS code. The biggy in there is a whitespace cleanup. After I was sent another set of whitespace cleanup patches I decided it was the time to clean the whitespace "issues" for once and and that touches many files below arch/mips/. Fix up silly conflicts, mostly due to whitespace cleanups. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (105 commits) MIPS: Quit exporting kernel internel break codes to uapi/asm/break.h MIPS: remove broken conditional inside vpe loader code MIPS: SMTC: fix implicit declaration of set_vi_handler MIPS: early_printk: drop __init annotations MIPS: Probe for and report hardware virtualization support. MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board MIPS: ath79: add USB controller registration code for the QCA955X SoCs MIPS: ath79: add PCI controller registration code for the QCA955X SoCs MIPS: ath79: add WMAC registration code for the QCA955X SoCs MIPS: ath79: register UART for the QCA955X SoCs MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear} MIPS: ath79: add GPIO setup code for the QCA955X SoCs MIPS: ath79: add IRQ handling code for the QCA955X SoCs MIPS: ath79: add clock setup code for the QCA955X SoCs MIPS: ath79: add SoC detection code for the QCA955X SoCs MIPS: ath79: add early printk support for the QCA955X SoCs MIPS: ath79: fix WMAC IRQ resource assignment mips: reserve elfcorehdr mips: Make sure kernel memory is in iomem MIPS: ath79: use dynamically allocated USB platform devices ...
yi-yang · Mar 2, 2013 · aebb2af · aebb2af
2 parents 8eae508 + edb15d8
commit aebb2af
Show file tree

Hide file tree

Showing 884 changed files with 16,135 additions and 15,926 deletions.
diff --git a/Documentation/devicetree/bindings/mips/cpu_irq.txt b/Documentation/devicetree/bindings/mips/cpu_irq.txt
@@ -0,0 +1,47 @@
+MIPS CPU interrupt controller
+
+On MIPS the mips_cpu_intc_init() helper can be used to initialize the 8 CPU
+IRQs from a devicetree file and create a irq_domain for IRQ controller.
+
+With the irq_domain in place we can describe how the 8 IRQs are wired to the
+platforms internal interrupt controller cascade.
+
+Below is an example of a platform describing the cascade inside the devicetree
+and the code used to load it inside arch_init_irq().
+
+Required properties:
+- compatible : Should be "mti,cpu-interrupt-controller"
+
+Example devicetree:
+	cpu-irq: cpu-irq@0 {
+		#address-cells = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	intc: intc@200 {
+		compatible = "ralink,rt2880-intc";
+		reg = <0x200 0x100>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpu-irq>;
+		interrupts = <2>;
+	};
+
+
+Example platform irq.c:
+static struct of_device_id __initdata of_irq_ids[] = {
+	{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_intc_init },
+	{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
+	{},
+};
+
+void __init arch_init_irq(void)
+{
+	of_irq_init(of_irq_ids);
+}
diff --git a/Documentation/devicetree/bindings/serial/lantiq_asc.txt b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
@@ -0,0 +1,16 @@
+Lantiq SoC ASC serial controller
+
+Required properties:
+- compatible : Should be "lantiq,asc"
+- reg : Address and length of the register set for the device
+- interrupts: the 3 (tx rx err) interrupt numbers. The interrupt specifier
+  depends on the interrupt-parent interrupt controller.
+
+Example:
+
+asc1: serial@E100C00 {
+	compatible = "lantiq,asc";
+	reg = <0xE100C00 0x400>;
+	interrupt-parent = <&icu0>;
+	interrupts = <112 113 114>;
+};
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
@@ -18,10 +18,10 @@ platforms += loongson1
 platforms += mti-malta
 platforms += mti-sead3
 platforms += netlogic
-platforms += pmc-sierra
+platforms += pmcs-msp71xx
 platforms += pnx833x
-platforms += pnx8550
 platforms += powertv
+platforms += ralink
 platforms += rb532
 platforms += sgi-ip22
 platforms += sgi-ip27

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
@@ -108,12 +108,14 @@ config ATH79
 config BCM47XX
 	bool "Broadcom BCM47XX based boards"
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select BOOT_RAW
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select FW_CFE
 	select HW_HAS_PCI
 	select IRQ_CPU
+	select NO_EXCEPT_FILL
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
@@ -295,6 +297,7 @@ config MIPS_MALTA
 	select BOOT_RAW
 	select CEVT_R4K
 	select CSRC_R4K
+	select CSRC_GIC
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA
 	select HAVE_PCSPKR_PLATFORM
@@ -354,6 +357,7 @@ config MIPS_SEAD3
 	select USB_ARCH_HAS_EHCI
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
+	select USE_OF
 	help
 	  This enables support for the MIPS Technologies SEAD3 evaluation
 	  board.
@@ -385,16 +389,6 @@ config NXP_STB225
 	help
 	 Support for NXP Semiconductors STB225 Development Board.
 
-config PNX8550_JBS
-	bool "NXP PNX8550 based JBS board"
-	select PNX8550
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config PNX8550_STB810
-	bool "NXP PNX8550 based STB810 board"
-	select PNX8550
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-
 config PMC_MSP
 	bool "PMC-Sierra MSP chipsets"
 	select CEVT_R4K
@@ -434,6 +428,22 @@ config POWERTV
 	help
 	  This enables support for the Cisco PowerTV Platform.
 
+config RALINK
+	bool "Ralink based machines"
+	select CEVT_R4K
+	select CSRC_R4K
+	select BOOT_RAW
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select USE_OF
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
+	select HAVE_MACH_CLKDEV
+	select CLKDEV_LOOKUP
+
 config SGI_IP22
 	bool "SGI IP22 (Indy/Indigo2)"
 	select FW_ARC
@@ -835,8 +845,9 @@ source "arch/mips/jazz/Kconfig"
 source "arch/mips/jz4740/Kconfig"
 source "arch/mips/lantiq/Kconfig"
 source "arch/mips/lasat/Kconfig"
-source "arch/mips/pmc-sierra/Kconfig"
+source "arch/mips/pmcs-msp71xx/Kconfig"
 source "arch/mips/powertv/Kconfig"
+source "arch/mips/ralink/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
 source "arch/mips/txx9/Kconfig"
@@ -917,6 +928,9 @@ config CSRC_POWERTV
 config CSRC_R4K
 	bool
 
+config CSRC_GIC
+	bool
+
 config CSRC_SB1250
 	bool
 
@@ -1103,19 +1117,6 @@ config SOC_PNX8335
 	bool
 	select SOC_PNX833X
 
-config PNX8550
-	bool
-	select SOC_PNX8550
-
-config SOC_PNX8550
-	bool
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_HAS_EARLY_PRINTK
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select GENERIC_GPIO
-
 config SWAP_IO_SPACE
 	bool
 

diff --git a/arch/mips/Makefile b/arch/mips/Makefile
@@ -191,7 +191,7 @@ endif
 include $(srctree)/arch/mips/Kbuild.platforms
 
 ifdef CONFIG_PHYSICAL_START
-load-y                                  = $(CONFIG_PHYSICAL_START)
+load-y					= $(CONFIG_PHYSICAL_START)
 endif
 
 cflags-y			+= -I$(srctree)/arch/mips/include/asm/mach-generic

diff --git a/arch/mips/alchemy/Platform b/arch/mips/alchemy/Platform
@@ -1,7 +1,7 @@
 #
 # Core Alchemy code
 #
-platform-$(CONFIG_MIPS_ALCHEMY)	+= alchemy/common/
+platform-$(CONFIG_MIPS_ALCHEMY) += alchemy/common/
 
 
 #
@@ -45,7 +45,7 @@ load-$(CONFIG_MIPS_MTX1)	+= 0xffffffff80100000
 #
 # MyCable eval board
 #
-platform-$(CONFIG_MIPS_XXS1500)	+= alchemy/
+platform-$(CONFIG_MIPS_XXS1500) += alchemy/
 load-$(CONFIG_MIPS_XXS1500)	+= 0xffffffff80100000
 
 #
@@ -56,7 +56,7 @@ load-$(CONFIG_MIPS_GPR)		+= 0xffffffff80100000
 
 # boards can specify their own <gpio.h> in one of their include dirs.
 # If they do, placing this line here at the end will make sure the
-# compiler picks the board one.  If they don't, it will make sure
+# compiler picks the board one.	 If they don't, it will make sure
 # the alchemy generic gpio header is picked up.
 
 cflags-$(CONFIG_MIPS_ALCHEMY)	+= -I$(srctree)/arch/mips/include/asm/mach-au1x00
diff --git a/arch/mips/alchemy/board-gpr.c b/arch/mips/alchemy/board-gpr.c
@@ -135,33 +135,33 @@ static struct mtd_partition gpr_mtd_partitions[] = {
 	{
 		.name	= "kernel",
 		.size	= 0x00200000,
-		.offset	= 0,
+		.offset = 0,
 	},
 	{
 		.name	= "rootfs",
 		.size	= 0x00800000,
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 		.mask_flags = MTD_WRITEABLE,
 	},
 	{
 		.name	= "config",
 		.size	= 0x00200000,
-		.offset	= 0x01d00000,
+		.offset = 0x01d00000,
 	},
 	{
 		.name	= "yamon",
 		.size	= 0x00100000,
-		.offset	= 0x01c00000,
+		.offset = 0x01c00000,
 	},
 	{
 		.name	= "yamon env vars",
 		.size	= 0x00040000,
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 	},
 	{
 		.name	= "kernel+rootfs",
 		.size	= 0x00a00000,
-		.offset	= 0,
+		.offset = 0,
 	},
 };
 

diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c
@@ -173,23 +173,23 @@ static struct mtd_partition mtx1_mtd_partitions[] = {
 	{
 		.name	= "filesystem",
 		.size	= 0x01C00000,
-		.offset	= 0,
+		.offset = 0,
 	},
 	{
 		.name	= "yamon",
 		.size	= 0x00100000,
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 		.mask_flags = MTD_WRITEABLE,
 	},
 	{
 		.name	= "kernel",
 		.size	= 0x002c0000,
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 	},
 	{
 		.name	= "yamon env",
 		.size	= 0x00040000,
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 	},
 };
 

diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
@@ -252,7 +252,7 @@ EXPORT_SYMBOL(au1xxx_ddma_del_device);
 u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
        void (*callback)(int, void *), void *callparam)
 {
-	unsigned long   flags;
+	unsigned long	flags;
 	u32		used, chan;
 	u32		dcp;
 	int		i;
@@ -512,7 +512,7 @@ u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
 		break;
 	}
 
-	/* If source input is FIFO, set static address.	*/
+	/* If source input is FIFO, set static address. */
 	if (stp->dev_flags & DEV_FLAGS_IN) {
 		if (stp->dev_flags & DEV_FLAGS_BURSTABLE)
 			src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
@@ -635,7 +635,7 @@ u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
 	dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
 	ctp->chan_ptr->ddma_dbell = 0;
 
-	/* Get next descriptor pointer.	*/
+	/* Get next descriptor pointer. */
 	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
 
 	/* Return something non-zero. */
@@ -697,7 +697,7 @@ u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
 	dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
 	ctp->chan_ptr->ddma_dbell = 0;
 
-	/* Get next descriptor pointer.	*/
+	/* Get next descriptor pointer. */
 	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
 
 	/* Return something non-zero. */
@@ -742,7 +742,7 @@ u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes)
 	*nbytes = dp->dscr_cmd1;
 	rv = dp->dscr_stat;
 
-	/* Get next descriptor pointer.	*/
+	/* Get next descriptor pointer. */
 	ctp->get_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
 
 	/* Return something non-zero. */
@@ -891,7 +891,7 @@ void au1xxx_dbdma_dump(u32 chanid)
 	chan_tab_t	 *ctp;
 	au1x_ddma_desc_t *dp;
 	dbdev_tab_t	 *stp, *dtp;
-	au1x_dma_chan_t  *cp;
+	au1x_dma_chan_t	 *cp;
 	u32 i		 = 0;
 
 	ctp = *((chan_tab_t **)chanid);
@@ -969,7 +969,7 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
 	dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
 	ctp->chan_ptr->ddma_dbell = 0;
 
-	/* Get next descriptor pointer.	*/
+	/* Get next descriptor pointer. */
 	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
 
 	/* Return something non-zero. */

diff --git a/arch/mips/alchemy/common/gpiolib.c b/arch/mips/alchemy/common/gpiolib.c
@@ -106,14 +106,14 @@ struct gpio_chip alchemy_gpio_chip[] = {
 		.ngpio			= ALCHEMY_GPIO1_NUM,
 	},
 	[1] = {
-		.label                  = "alchemy-gpio2",
-		.direction_input        = gpio2_direction_input,
-		.direction_output       = gpio2_direction_output,
-		.get                    = gpio2_get,
-		.set                    = gpio2_set,
+		.label			= "alchemy-gpio2",
+		.direction_input	= gpio2_direction_input,
+		.direction_output	= gpio2_direction_output,
+		.get			= gpio2_get,
+		.set			= gpio2_set,
 		.to_irq			= gpio2_to_irq,
-		.base                   = ALCHEMY_GPIO2_BASE,
-		.ngpio                  = ALCHEMY_GPIO2_NUM,
+		.base			= ALCHEMY_GPIO2_BASE,
+		.ngpio			= ALCHEMY_GPIO2_NUM,
 	},
 };