src/Makefile

#
# Makefile for Vim on Unix				vim:ts=8:sw=8:tw=78
#
# This Makefile is loosely based on the GNU Makefile conventions found in
# standards.info.
#
# Compiling Vim, summary:
#
#	3. make
#	4. make install
#
# Compiling Vim, details:
#
# Edit this file for adjusting to your system. You should not need to edit any
# other file for machine specific things!
# The name of this file MUST be Makefile (note the uppercase 'M').
#
# 1. Edit this Makefile
#    The defaults for Vim should work on most machines, but you may want to
#    uncomment some lines or make other changes below to tune it to your
#    system, compiler or preferences.
#    - If you want a version of Vim that is small and starts up quickly, you
#      might want to disable the GUI and X11:
#      - Put a # before the lines with --enable-gui if you have Motif and/or
#        Athena but don't want to make gvim (the GUI version of Vim with nice
#        menus and scrollbars, but makes Vim bigger and startup slower).
#      - Remove the # before the line "CONF_OPT_X = --without-x" if you have
#        X11 but want to disable using X11 libraries.  Vim won't set the
#        window titles then.
#    - Uncomment one of CFLAGS and/or CC if you have something very special or
#      want to tune the optimizer.
#    - Search for the name of your system to see if it needs anything special.
#    - A few versions of make use '.include "file"' instead of 'include file'.
#      Adjust the include line below if yours does.
#
# 2. Edit feature.h
#    Only if you do not agree with the default compile features, e.g.:
#       - you want Vim to be as vi compatible as it can be
#       - you want to use Emacs tags files
#       - you want right-to-left editing (Hebrew)
#       - you want 'langmap' support (Greek)
#       - you want to remove features to make Vim smaller
#
# 3. "make"
#    Will first run ./configure with the options in this file. Then it will
#    start make again on this Makefile to do the compiling. You can also do
#    this in two steps with:
#		make config
#		make
#    The configuration phase creates/overwrites config.h and config.mk.
#    Configure is created with autoconf.  It can detect different features of
#    your system and act accordingly.  However, it is not correct for all
#    systems.  Check this:
#    - If you have X windows, but configure could not find it or reported
#      another include/library directory then you wanted to use, you have to
#      set CONF_OPT_X below.  You might also check the installation of xmkmf.
#    - If you have --enable-gui=motif and have Motif on your system, but
#      configure reports "checking for location of gui... <not found>", you
#      have to set GUI_INC_LOC and GUI_LIB_LOC below.
#    If you changed something do this to run configure again:
#		make distclean
#		make config
#		make
#
#    - If you do not trust the automatic configuration code, then inspect 
#      config.h and config.mk, before starting the actual build phase. If
#      possible edit this Makefile, rather than config.mk -- especially look
#      the definitions of VIM_HLP and SYS_VIMRC_FILE below. Note that the
#      configure phase overwrites config.mk and config.h again.
#    - If you get error messages, find out what is wrong and try to correct it
#      in this Makefile. You may need to do "make distclean" when you
#      change anything that configure uses (e.g. switching from an old C
#      compiler to an ANSI C compiler). Only when ./configure does something
#      wrong you may need to change one of the other files. If you find a
#      clean way to fix the problem, consider sending a note to the author of
#      autoconf (bug-gnu-utils@prep.ai.mit.edu) or Vim (mool@oce.nl). Don't
#      bother to do that when you made a hack solution for a non-standard
#      system.
#
# 4. "make install"
#    If the new Vim seems to be working OK you can install it and the
#    documentation in the appropriate location. The default is "/usr/local".
#    Change "PREFIX" below to change the location. "pathdef.c" will be
#    compiled again after changing this to make the executable know where the
#    help files are located.
#    Note that any existing executable and documentation is removed or
#    overwritten.  If you want to keep it you will have to make a backup copy
#    first.

### This Makefile has been succesfully tested on these systems.
### Check the (*) column for remarks, listed below.
### Later code changes may cause small problems, otherwise Vim is supposed to
### compile and run without problems.

#system:              configurations:    	     version (*) tested by:
#-------------        ------------------------       -------  -  ----------
#AIX 3                cc            +X11 +GUI -GUI      3.19     Ali Albayrak
#AIX 3                cc            +X11 +GUI -GUI      3.29 (9) Stephen Riehm
#AIX 4                cc gcc-2.7.2  +X11 -GUI           3.27 (4) Axel Kielhorn
#A/UX 3.1.1           gcc           +X11                3.27 (6) Jim Jagielski
#Alpha OSF1           cc gcc-2.6.3   +X11 +GUI          3.23     Robert Webb
#Alpha OSF1 V3.2      cc            +X11                3.22     Heiko Nardmann
#Apollo               cc             -X11 -GUI          3.23     Robert Webb
#BSDI 2.01 (x86)      cc gcc-2.6.3   X11R6              3.17     Eric Fischer
#BSDI 2.01 (x86)      shlicc2 gcc-2.6.3 noX X11R6       3.19     Jos Backus
#BSDI 2.1 (x86)       shlicc2 gcc-2.6.3 noX X11R6       3.23 (1) Jos Backus
#ConvexOS                cc          +X11 Motif Athena  3.29     Lennart Schultz
#dynix/ptx 1.4.0      cc             -X11 -GUI          3.21     Juergen Weigert
#FreeBSD 2.0.5           gcc-2.6.3   X11R6              3.17     Bram Moolenaar
#FreeBSD 2.1.0           gcc-2.6.3   X11R6 Lesstif 0.35 4.0  (5) Bram Moolenaar
#FreeBSD 2.1.0           gcc-2.6.3   +X11 -GUI +Athena  4.0      Bram Moolenaar
#HP-UX 9.00           c89 cc         X11R5 Motif 1.2    3.24 (2) Bram Moolenaar
#HP-UX 9.01           gcc            +X11 +GUI          3.28     Mun Johl
#HP-UX 9.01 (400)     gcc            +X11               3.27     Axel Kielhorn
#HP-UX 9.01 (400)     cc89           +X11 +Motif 1.2    3.27     Axel Kielhorn
#HP-UX 9.01 (700)     gcc            +X11 +Motif 1.2    3.27     Axel Kielhorn
#HP-UX 9.01 (700)     cc89         +X11 +Athena +Motif  3.27     Axel Kielhorn
#HP-UX A.09.03U (SPP1000) gcc-2.5.8  +X11 Motif         3.29     Lennart Schultz
#HP-UX 9.04E          cc gcc-2.6.3   X11R5 Motif 1.2    3.25     Kayhan Demirel
#HP-UX 9.04E          cc             +X11 +GUI  Motif   3.27     Bill Foster
#HP-UX 9.05           cc             -X11 -GUI          3.27     Juergen Weigert
#HP-UX 9.05           cc             +X11 -GUI  X11R5   3.25     Robert Colon
#HP-UX 9.05	      c89 gcc-2.7.2 (HP 700)            3.18 (Y) Axel Kielhorn
#HP-UX 9.05           gcc-2.7.2      +X11R6.1 Athena3d  3.29     L. Duperval
#HP-UX 9.05           gcc-2.7.2      -X11 -GUI          3.29     L. Duperval
#HP-UX 9.05 (700)     cc             X11R5 Motif 1.2    3.27     Bram Moolenaar
#HP-UX 9.07           c89            X11R5 Motif 1.2    3.23 (Y) Nikhil Patel
#HP-UX 10.01A         cc gcc-2.6.3   X11R5 Motif 1.2    3.25     Kayhan Demirel
#HP-UX 10.01          cc             X11R6  -GUI        3.20     Jiwei Wang
#HP-UX 10.01          cc             -X11 -GUI          3.27     Juergen Weigert
#HP-UX 10.10          cc             X11R5 Motif 1.2    3.22     Nikhil Patel
#HP-UX 10.10          c89            X11R5 Motif 1.2    3.23 (Z) Nikhil Patel
#HP-UX 10.10          cc             X11R5 Motif 1.2    3.29     Stephen Riehm
#Irix 5.2/5.3         cc gcc-2.6.3   +X11 +GUI          3.22     Robert Webb
#Irix 5.3             cc             -X11 -GUI          3.27     Juergen Weigert
#Irix 5.3             cc             +X11 +Motif        3.26     Ives Aerts
#Irix-5.3 (IP22 mips)    gcc-2.7.2   +X11 Motif Athena  3.29     Lennart Schultz
#Irix 6.2             cc             +X11 +GUI (Motif)  3.24     Bruce Templeton
#KSR OS R1.2.2        cc             -X11 -GUI          3.21     Juergen Weigert
#Linux/LST            gcc            +X11R6 +GUI=Athena 3.27     Juergen Weigert
#Linux 1.2.13 (x86)   cc (gcc-2.7.0) X11R6              3.17     Eric Fischer
#Linux 1.2.13-ELF        gcc-2.7.0   X11R6 +GUI         3.27     Tony Nugent
#Linux 1.2.13            gcc-2.7.0   +X11 -GUI X11R6    3.25     Robert Colon
#Linux 1.2.13-ELF        gcc-2.7.0   -X11 -GUI          3.21     Juergen Weigert
#Linux 1.3.3 #2 i586  gcc 2.6.3      +X11R6 +GUI        3.26     Renate Schmidt
#Linux 1.3.73-ELF        gcc-2.7.0   +X11 -GUI          3.22     Paul Slootman
#Linux 1.3.94-ELF        gcc-2.7.0   +X11 +GUI Athena   3.25     Paul Slootman
#Linux 1.3.97-ELF        gcc-2.7.2   +X11 +GUI Athena   3.26     Iva Cabric
#Linux 1.3.98-ELF        gcc-2.7.2   +X11 Athena Motif  3.27     Bill Foster
#Linux 1.3.39            gcc-2.7.2   +X11R6 Athena3d    3.28     L. Duperval
#Linux 1.99.7            gcc-2.7.0   +X11 Athena        3.29     Lennart Schultz
#Linux 1.99.7            gcc-2.7.0   +X11 +GUI Athena   3.29     Paul Slootman
#mot88 R32V3          cc             -X11 -GUI          3.21     Juergen Weigert
#NCR Tower 32/450 SVR3   cc          -X11               3.22     Paul Slootman
#NCR Tower 32/450 SVR3   gcc-2.4.3   -X11               3.22     Paul Slootman
#NetBSD 1.0A             gcc-2.4.5   -X11 -GUI          3.21 (X) Juergen Weigert
#NetBSD 1.1A             gcc-2.7.2   +X11 +GUI  Athena  3.27     Bill Foster
#NeXTstep 3.0 (68k)      gcc-2.6.2   noX                3.17     Eric Fischer
#SCO Unix 3.2v4.2     cc             -X11               3.22     Paul Slootman
#SCO Unix v3.2.5      cc             +X11 Motif         3.27 (C) M. Kuperblum
#SCO 4.0 level 3.2.4                 -X11               3.19     Glauber
#SCO Open Server 5                   +X11 +GUI Motif    3.28 (A) J.C. van Winkel
#Sequent/ptx V1.4.0   cc gcc-2.2.2   +X11R5 -GUI        3.27     Juergen Weigert
#Sinix 5.41 (x86 SVR4)   gcc-2.4.3   -X11               3.29     Paul Slootman
#SNI Targon31 TOS 4.1.11 cc          -X11               3.22     Paul Slootman
#SNI Targon31 TOS 4.1.11 gcc-2.4.5   +X11 -GUI          3.29 (B) Paul Slootman
#Solaris 2.3 (SunOS 5.3) gcc-2.6.3   X openwin          3.18     Aswin Kumar
#Solaris 2.4 (x86)       gcc-2.6.0   -X11               3.29     Paul Slootman
#Solaris 2.4 (x86)       gcc-2.6.0   +X11 -GUI          3.25     Paul Slootman
#Solaris 2.4 (x86)       gcc-2.6.0   +X11 +GUI openwin  3.29     Paul Slootman
#Solaris 2.4 (sun4m)     gcc-2.7.2   +X11 Motif Athena  3.29     Lennart Schultz
#Solaris 2.4 (Sparc)  cc             +X11 +GUI          3.29     Glauber
#Solaris 2.4 sun4m    gcc 2.7.2      +X11R6 Motif       3.29     L. Duperval
#Solaris 2.4 sun4m    gcc 2.7.2      -X11R6 -GUI        3.29     L. Duperval
#Solaris 2.4          gcc-2.7.2      +X11 +GUI Motif    3.26     Iva Cabric
#Solaris 2.4/2.5      clcc           +X11 -GUI  openwin 3.20 (7) Robert Colon
#Solaris 2.4/2.5      cc (SUNWspro)  +X11 -GUI  openwin 3.25     Robert Colon
#Solaris 2.5          cc             -X11 -GUI          3.27     Juergen Weigert
#Solaris 2.5          cc        +X11=openwin +GUI=Motif 3.27     Juergen Weigert
#Solaris 2.5          gcc-2.7.2      +X11 +GUI Motif    3.26     Iva Cabric
#Solaris 2.5          gcc 2.7.2      +X11R6 +GUI        3.29     Renate Schmidt
#Solaris 2.5 (sun4m)     gcc-2.7.2   +X11R6 +GUI (CDE)  3.29     Andrew Large
#Solaris 2.5 (sun4m)   cc (SC3.0.1)  +X11R6 +GUI (CDE)  3.29     Andrew Large
#Solaris 2.5 (sun4u)     gcc-2.7.2   +X11 Motif Athena  3.29     Lennart Schultz
#SunOS 4.1.1 (sun4c)     cc          -X11               3.29     Lennart Schultz
#SunOS 4.1.2 (sun4c)     cc          -X11               3.29     Lennart Schultz
#SunOS 4.1.3 (sun4c)     cc          -X11               3.29     Lennart Schultz
#SunOS4.1.3_U1           gcc-2.3.3   X11 openwin Motif  3.18     Ashwin Kumar
#SunOS4.1.3u1            gcc-2.7.0   ?X openwin         3.16     Bob Cmelik
#SunOs 4.1.3/4        cc             +X11 -GUI  openwin 3.25     Robert Colon
#SunOS 4.1.3          cc gcc-2.7.0   -X11 -GUI          3.27     Juergen Weigert
#SunOS 4.1.3          cc gcc-2.7.0   +X11R5 +GUI=Athena 3.27     Juergen Weigert
#SunOS 4.1.4          cc gcc-2.6.3   +X11 +GUI          3.23     Robert Webb
#SunOS 4.1.4 (sparc)  cc gcc-2.6.3       openwin        3.17     Eric Fischer
#SunOS 4.1.4 (sun4c)     gcc-2.7.2   +X11 Athena        3.29     Lennart Schultz
#SunOS 4.1.4          gcc            +X11 +GUI Motif    3.29     Karsten Sievert
#SUPER-UX 6.1.r1 (SX-4)   cc         +X11 Motif         3.29     Lennart Schultz
#Ultrix               cc             -X11 +X11          3.23 (3) Bram Moolenaar
#Unisys 6035          cc                 X11 Motif      3.29 (8) Glauber
#UnixWare 4.2         cc gcc-2.6.3       X11            3.19     Robert Webb
#UnixWare             cc             +X11 -GUI          3.23     Robert Webb
#UnixWare             cc             +X11R5 +GUI Motif  3.23     Thanh Ma
#UnixWare             cc             +X11R5 +GUI Athena 3.24     Thanh Ma


# (*)  Remarks:
#
# (1)  Uncomment line below for shlicc2
# (2)  Needs c89 on a 400 system, uncomment line below
# (3)  Use sh5 instead of sh to run configure, uncomment line below
# (4)  For cc the optimizer must be disabled (use CFLAGS= after running
#      configure) (symptom: ":set termcap" output looks weird).
# (5)  Lesstif compiles fine, but it does not really work (menus crash, etc.)
# (6)  See below for a few lines to uncomment
# (7)  See below for lines which enable the use of clcc
# (8)  Needs some EXTRA_LIBS, search for Unisys below
# (9)  GCC does not work
# (A)  needs EXTRA_LIB, see below
# (B)  Can't compile GUI because there is no waitpid()...  Disable GUI below.
# (X)  Need to use the .include "config.mk" line below
# (Y)  See line with c89 below
# (Z)  See line with c89 below

#DO NOT CHANGE the next line, we need it for configure to find the compiler
#instead of using the default from the "make" program.
#Use a line further down to change the value for CC.
CC=

# Change and use these defines if configure cannot find your Motif stuff.
# Unfortunately there is no "standard" location for Motif.
# These defines can contain a single directory (recommended) or a list of
# directories (for when you are working with several systems). The LAST
# directory that exists is used.
# When changed, run "make distclean" next!
#GUI_INC_LOC = /usr/include/Motif2.0 /usr/include/Motif1.2
#GUI_LIB_LOC = /usr/lib/Motif2.0 /usr/lib/Motif1.2

######################## config.mk ########################
# At this position config.mk is included. When starting from the
# distribution it is almost empty. After running ./configure it contains
# settings that have been discovered for your system. Settings below this
# include override settings in config.mk!

# (X) How to include config.mk depends on the version of "make" you have, if
#     the current choice doesn't work, try the other one.

include config.mk
#.include "config.mk"

# Include the configuration choices first, so we can override everything
# below. As shipped, this file contains a target that causes to run
# configure. Once configure was run, this file contains a list of 
# make variables with predefined values instead. Thus any second invocation
# of make, will buid Vim.

# You can give a lot of options to configure. 
# Change this to your desire and do 'make config' afterwards

### For creating Vim with GUI (gvim)
# Comment these all out when you don't want to get the GUI version, although
# you have Motif and/or Athena. (B)
# When using "yes" configure will use Motif if it can be found, otherwise use
# Athena when it can be found.
# If the Motif and Athena files are not found, GUI is disabled automatically
CONF_OPT_GUI = --enable-gui=yes
#CONF_OPT_GUI = --enable-gui=motif
#CONF_OPT_GUI = --enable-gui=athena

### For creating a plain Vim without any X11 related fancies use this one:
### (otherwise Vim configure will try to include xterm titlebar access)
### Also disable the GUI above, otherwise it will be included anyway.
### When both GUI and X11 have been disabled this may save about 15% of the
### code and make Vim startup quicker.
#CONF_OPT_X = --without-x

### If you have multiple X11 derivates installed, you may wish to specify
### which one to use. This here selects openwin (as found on sun).
### Select nothing to let configure choose.
#XROOT = /usr/openwin
#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib

### COMPILER -- the default from configure will mostly be fine, no need to
### change this, just an example. If a compiler is defined here, configure
### will use it rather than probing for one. It is dangerous to change this
### after configure was run. Make will use your choice then -- but beware: 
### Many things may change with another compiler. It is wise to run 'make
### distclean' and start all over again.
#CC = cc
#CC = gcc

###
### COMPILER FLAGS - change as you please. Either before running configure
### or afterwards. For examples see below.
### Linux: When using -g, you will probably get a statically linked
### executable!!
### When not defined, configure will try to use -O2 -g for gcc and -O for cc.
CFLAGS = -g
#CFLAGS = -O
#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes

### Often used for GCC: optimizing, lot of optimizing, debugging
#CFLAGS = -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes
#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes
#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes

#####################################################
###  Specific systems, check if yours is listed!  ###
#####################################################

### Uncomment things here only if the values chosen by configure are wrong.
### It's better to adjust configure.in and run autoconf, if you can!
### Then send the required changes to configure.in to the bugs list.

### (1) BSD/OS 2.0.1 or 2.1 with the shared library version of gcc-2.6.3
###
#CC = shlicc2
#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin

### (2) HP-UX 9.01 on a 400 workstation with a cc that complains about space
### (Y) HP-UX 9.07 with the ANSI compiler
#CC = c89 -D_INCLUDE_HPUX_SOURCE -D_INCLUDE_XOPEN_SOURCE -D_INCLUDE_POSIX_SOURCE

### (Z) HP-UX 10.10 with the ANSI compiler
###     Will you gues at HP finally decide which options should be used?!?!
#CC = c89 -D_INCLUDE_HPUX_SOURCE -D_INCLUDE_XOPEN_SOURCE -D_INCLUDE_XOPEN_SOURCE_EXTENDED

### (3) For Ultrix, where using sh gives an error when running configure
###     Use sh5 instead.
#CONF_SHELL = sh5

### (7) Solaris 2.4/2.5 with Centerline compiler
#CC = clcc
#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib
#CFLAGS = -O

### (8) Unisys 6035 (use the first with GUI, the second without)
#EXTRA_LIBS = -lsocket -lgen
#EXTRA_LIBS = -lnsl -lsocket -lgen

### When builtin functions cause problems with gcc (for Sun 4.1.x)
#CFLAGS = -O2 -Wall -traditional -Wno-implicit

### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0)
#EXTRA_DEFS = -DDOMAIN
#CFLAGS= -O -A systype,bsd4.3

### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined)
# Not needed for Irix 5.3, Ives Aerts reported
#EXTRA_LIBS = -lmalloc -lc_s

### Coherent 4.2.10 on Intel 386 platform
#EXTRA_DEFS = -Dvoid=int
#EXTRA_LIBS = -lterm -lsocket

### SCO 3.2, with different library name for terminfo
#EXTRA_LIBS = -ltinfo

### Solaris 2.3 with X11 and specific cc
#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib

### UTS2 for Amdahl UTS 2.1.x
#EXTRA_DEFS = -DUTS2
#EXTRA_LIBS = -lsocket

### UTS4 for Amdahl UTS 4.x
#EXTRA_DEFS = -DUTS4 -Xa

### USL for Unix Systems Laboratories (SYSV 4.2)
#EXTRA_DEFS = -DUSL

### RISCos on MIPS without X11
#EXTRA_DEFS = -DMIPS

### RISCos on MIPS with X11
#EXTRA_LIBS = -lsun

### (6)  A/UX 3.1.1 with gcc (Jim Jagielski)
#CC= gcc -D_POSIX_SOURCE
#CFLAGS= -O2
#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11

### (A)  SCO Open Server 5 (Jan Christiaan van Winkel)
#EXTRA_LIBS = -lgen

### (C)  On SCO Unix v3.2.5 (and probably other versions) the termcap library,
###      which is found by configure, doesn't work correctly.  Symptom is the
###	 error message "Termcap entry too long".  Uncomment the next line.
### after changing this, you need to do "make distclean; make".
#TERM_LIB = -lcurses

### If you want to use ncurses library instead of the automatically found one
### after changing this, you need to do "make distclean; make".
#TERM_LIB = -lncurses

##################### end of system specific lines ###################

### Name of target(s)
TARGET = vim
GTARGET = gvim

### Installation directory. Default from configure is "/usr/local".
### EXEC_PREFIX is for the executable, PREFIX is for other files (they may be
### different when using different architectures for the executable and a
### common directory for the other files).
###
### Uncomment the next two lines to install in your home directory.
#PREFIX      = $(HOME)
#EXEC_PREFIX = $(HOME)
### Uncomment the next line only if the value of PREFIX is different from
### EXEC_PREFIX
#PREFIX_MKDIR = $(PREFIX)

### Location of executable
BINLOC = $(EXEC_PREFIX)/bin

### Location of man page
MANLOC = $(PREFIX)/man
MANDIR = /man1

### Location of help files and system global vimrc
### The default for HELPDIR comes from configure: "/share" or "/lib"
#HELPDIR = /lib
HELPSUBDIR = /vim
HELPLOC = $(PREFIX)$(HELPDIR)
HELPSUBLOC = $(HELPLOC)$(HELPSUBDIR)

### These go into pathdef.c
VIM_HLP = $(HELPSUBLOC)/vim_help.txt
SYS_VIMRC_FILE  = $(HELPSUBLOC)/vimrc
SYS_GVIMRC_FILE = $(HELPSUBLOC)/gvimrc

### Program to run on installed binary
STRIP = strip

### Permissions for vim binary
BINMOD = 755

### Permissions for man page
MANMOD = 644

### Permissions for help files
HELPMOD = 644

### Permissions for bin/man/help directories that are created
DIRMOD = 755

# Where to copy the man and help files from
HELPSOURCE = ../doc

# If you are using Linux, you might want to use this to make vim the
# default vi editor, it will create a link to Vim when doing "make install".
#LINKIT = -ln -f -s /usr/bin/vi $(BINLOC)/$(TARGET)

###
### GRAPHICAL USER INTERFACE (GUI).
### 'configure --enable-gui' can enable one of these for you if you did set
### a corresponding CONF_OPT_GUI above and have X11.
### Override configures choice by uncommenting one of the following lines (The
### first is an explicit enable, the second is an explicit disable):
# MOTIF_COMMENT =
# MOTIF_COMMENT = ZZZ

# Some NeXT system's make cannot handle this, you will get a syntax error.
# Use gmake instead or put a # in front of the lines starting with '$'.

### Motif GUI interface. 
$(MOTIF_COMMENT)GUI_INCL  = gui.h
$(MOTIF_COMMENT)GUI_SRC   = gui.c gui_motif.c gui_x11.c pty.c
$(MOTIF_COMMENT)GUI_OBJ   = gui.o gui_motif.o gui_x11.o pty.o
$(MOTIF_COMMENT)GUI_DEFS  = -DUSE_GUI_MOTIF $(NARROW_PROTO)
$(MOTIF_COMMENT)GUI_IPATH = -I$(GUI_INC_LOC)
$(MOTIF_COMMENT)GUI_LIBS_DIR = -L$(GUI_LIB_LOC)
$(MOTIF_COMMENT)GUI_LIBS  = -lXm -lXt
$(MOTIF_COMMENT)LINKGVIM = -rm -f $(BINLOC)/$(GTARGET); cd $(BINLOC); ln -s $(TARGET) $(GTARGET)

#For SunOS (Solaris) you might want to use this line:
#$(MOTIF_COMMENT)GUI_LIBS_DIR = -L$(GUI_LIB_LOC) -R$(GUI_LIB_LOC)

# ATHENA_COMMENT =
# ATHENA_COMMENT = ZZZ
### Athena Widget GUI interface.
### Use Xaw3d if you have it, makes the menus looks nicer
#XAW_LIB = -lXaw3d
XAW_LIB = -lXaw

$(ATHENA_COMMENT)GUI_INCL  = gui.h
$(ATHENA_COMMENT)GUI_SRC   = gui.c gui_athena.c gui_x11.c pty.c gui_at_sb.c
$(ATHENA_COMMENT)GUI_OBJ   = gui.o gui_athena.o gui_x11.o pty.o gui_at_sb.o
$(ATHENA_COMMENT)GUI_DEFS  = -DUSE_GUI_ATHENA $(NARROW_PROTO)
$(ATHENA_COMMENT)GUI_IPATH = -I$(GUI_INC_LOC)
$(ATHENA_COMMENT)GUI_LIBS_DIR = -L$(GUI_LIB_LOC)
$(ATHENA_COMMENT)GUI_LIBS  = $(XAW_LIB) -lXt -lXmu
$(ATHENA_COMMENT)LINKGVIM = -rm -f $(BINLOC)/$(GTARGET); cd $(BINLOC); ln -s $(TARGET) $(GTARGET)

# GUI files used for making ctags
ALL_GUI_INCL = gui.h gui_at_sb.h
ALL_GUI_SRC  = gui.c gui_motif.c gui_x11.c gui_athena.c gui_at_sb.c
ALL_GUI_PRO  = gui.pro gui_motif.pro gui_athena.pro gui_x11.pro

### our grand parent directory should know who we are...
### only used for "make tar"
VIMVERSION = `eval "basename \`cd ../../; pwd\`"`

### Command to create dependencies based on #include "..."
### prototype headers are ignored due to -DPROTO, system 
### headers #include <...> are ignored if we use the -MM option, as
### e.g. provided by gcc-cpp.
### Include USE_GUI to get gependency on gui.h
CPP_DEPEND = $(CC) -M$(CPP_MM) -DPROTO -DUSE_GUI $(DEFS) $(GUI_DEFS) $(EXTRA_DEFS) $(GUI_IPATH) $(X_CFLAGS)

# flags for cproto
#     __inline and __attribute__ are not recognized by cproto
#     maybe the "/usr/bin/cc -E" has to be adjusted for some systems

NO_ATTR = -D__inline= -D"__attribute__\\(x\\)="

# This is for cproto 3.5 patchlevel 3:
# PROTO_FLAGS = -f4 -m__PARMS -d -E"$(CPP)" $(NO_ATTR)
#
# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check):
# PROTO_FLAGS = -f4 -m__PARMS -d -E"$(CPP)" $(NO_ATTR)
# 
# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check):
PROTO_FLAGS = -m -M__PARMS -d -E"$(CPP)" $(NO_ATTR)


################################################
##   no changes required below this line      ##
################################################

SHELL = /bin/sh

.SUFFIXES:
.SUFFIXES: .c .o .pro

ALL_CFLAGS = $(DEFS) $(GUI_DEFS) $(EXTRA_DEFS) $(GUI_IPATH) $(CFLAGS) $(X_CFLAGS)

ALL_LIBS = $(GUI_LIBS_DIR) $(X_LIBS_DIR) $(GUI_LIBS) $(X_PRE_LIBS) $(GUI_X_LIBS) $(X_LIBS) $(X_EXTRA_LIBS) $(LIBS) $(EXTRA_LIBS)

PFLAGS = $(PROTO_FLAGS) -DPROTO $(DEFS) $(GUI_DEFS) $(EXTRA_DEFS) $(GUI_IPATH) $(X_CFLAGS)

#     BASIC_INCL and BASIC_SRC: files that are always used
#         GUI_INCL and GUI_SRC: extra GUI files for current configuration
# ALL_GUI_INCL and ALL_GUI_SRC: all GUI files
#
#                 INCL and SRC: files used for current configuration
#                     ALL_INCL: files used for make depend and ctags
#                      ALL_SRC: files used for make depend

BASIC_INCL = vim.h globals.h option.h keymap.h macros.h ascii.h term.h unix.h \
	unixunix.h structs.h proto.h osdef.h config.h

INCL =  $(BASIC_INCL) $(GUI_INCL)

ALL_INCL = $(BASIC_INCL) $(ALL_GUI_INCL)

BASIC_SRC =	alloc.c buffer.c charset.c \
	cmdcmds.c cmdline.c csearch.c \
	digraph.c edit.c fileio.c getchar.c \
	help.c linefunc.c main.c mark.c \
	memfile.c memline.c message.c \
	misccmds.c normal.c ops.c option.c \
	pathdef.c quickfix.c regexp.c regsub.c screen.c \
	search.c tables.c tag.c term.c \
	undo.c unix.c version.c window.c

SRC =	$(BASIC_SRC) $(GUI_SRC)

ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC)

OBJ =	alloc.o unix.o buffer.o charset.o \
	cmdcmds.o cmdline.o csearch.o \
	digraph.o edit.o fileio.o getchar.o \
	help.o linefunc.o main.o mark.o \
	memfile.o memline.o message.o \
	misccmds.o normal.o ops.o option.o \
	pathdef.o quickfix.o regexp.o regsub.o screen.o \
	search.o tables.o tag.o term.o \
	undo.o window.o $(GUI_OBJ)

PRO_AUTO = unix.pro $(ALL_GUI_PRO) \
	alloc.pro buffer.pro charset.pro cmdcmds.pro \
	cmdline.pro csearch.pro digraph.pro edit.pro \
	fileio.pro getchar.pro help.pro linefunc.pro \
	main.pro mark.pro memfile.pro memline.pro \
	message.pro misccmds.pro normal.pro ops.pro \
	option.pro quickfix.pro regexp.pro regsub.pro \
	screen.pro search.pro tables.pro tag.pro \
	term.pro termlib.pro undo.pro version.pro window.pro

PRO_MANUAL = amiga.pro msdos.pro win32.pro

# Default target is making the executable
all: $(TARGET)

# Run ./configure with all the setting above.
config: configure
	GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \
		CC="$(CC)" CFLAGS="$(CFLAGS)" TERM_LIB="$(TERM_LIB)" \
	$(CONF_SHELL) ./configure $(CONF_OPT_GUI) $(CONF_OPT_X)

# When configure.in has changed, run autoconf to produce configure
# If you don't have autoconf, use the configure that's there
configure: configure.in
	autoconf
# Fix a bug in autoconf 2.8 and 2.9 (not needed for 2.10, which we use now):
#	mv -f configure configure.wrong
#	sed -e 's+$$ac_cv_lib_dnet+$$ac_cv_lib_$$ac_lib_var+' configure.wrong > configure
#	rm -f configure.wrong
	chmod 755 configure

# Re-execute this Makefile to include the new config.mk produced by configure
# Only used when typing "make" with a fresh config.mk.
myself:
	$(MAKE) -f Makefile all


# Link the target for normal use
$(TARGET): $(OBJ) version.c
	$(CC) -c $(ALL_CFLAGS) version.c
	$(CC) $(LDFLAGS) -o $(TARGET) $(OBJ) version.o $(ALL_LIBS)

# Link the target for debugging
debug: $(OBJ) version.c
	$(CC) -c $(ALL_CFLAGS) version.c
	$(CC) $(LDFLAGS) -o $(TARGET) -g $(OBJ) version.o $(ALL_LIBS) 

# Generate function prototypes.  This is not needed to compile vim, but if
# you want to use it, cproto is out there on the net somewhere -- Webb
#
# When generating amiga.pro, msdos.pro and win32.pro there will be a few
# include files that can not be found, that's OK.

proto: $(PRO_AUTO) $(PRO_MANUAL)

### Would be nice if this would work for "normal" make.
### Currently it only works for (Free)BSD make.
#$(PRO_AUTO): $$(*F).c
#	cproto $(PFLAGS) -DUSE_GUI $(*F).c > $@

# Always define USE_GUI.  This will generate a few warnings if it's also
# defined in config.h, you can ignore that.
.c.pro:
	cproto $(PFLAGS) -DUSE_GUI $< > proto/$@

amiga.pro: amiga.c
	cproto $(PFLAGS) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* amiga.c > proto/amiga.pro

msdos.pro: msdos.c
	cproto $(PFLAGS) -DMSDOS -UHAVE_CONFIG_H msdos.c > proto/msdos.pro

win32.pro: win32.c
	cproto $(PFLAGS) -DWIN32 -UHAVE_CONFIG_H win32.c > proto/win32.pro

notags:
	rm -f tags

# Note: tags is made for the currently configured version, can't include both
# Motif and Athena GUI
ctags tags TAGS: notags
	$(CTAGS) $(SRC) $(ALL_INCL)

#
# Avoid overwriting an existing executable, somebody might be running it and
# overwriting it could cause it to crash.  Deleting it is OK, it won't be
# really deleted until all running processes for it have exited.  It is
# renamed first, in case the deleting doesn't work.
#
# If you want to keep an older version, rename it before running "make
# install".
#
install: $(TARGET) $(EXEC_PREFIX) $(BINLOC) $(PREFIX) $(MANLOC) $(MANLOC)$(MANDIR) $(HELPLOC) $(HELPSUBLOC)
	-mv -f $(BINLOC)/$(TARGET) $(BINLOC)/$(TARGET).old
	-rm -f $(BINLOC)/$(TARGET).old
	cp $(TARGET) $(BINLOC)
	$(STRIP) $(BINLOC)/$(TARGET)
	chmod $(BINMOD) $(BINLOC)/$(TARGET)
	-$(LINKIT)
	-$(LINKGVIM)
	sed -e s+/usr/local/lib/vim+$(HELPSUBLOC)+ $(HELPSOURCE)/vim.1 > $(MANLOC)$(MANDIR)/vim.1
	chmod $(MANMOD) $(MANLOC)$(MANDIR)/vim.1
	cp $(HELPSOURCE)/vim_*.txt $(HELPSUBLOC)
	cp $(HELPSOURCE)/vim_tags $(HELPSUBLOC)
	chmod $(HELPMOD) $(HELPSUBLOC)/vim_*.txt $(HELPSUBLOC)/vim_tags

$(EXEC_PREFIX) $(BINLOC) $(PREFIX_MKDIR) $(MANLOC) $(MANLOC)$(MANDIR) $(HELPLOC) $(HELPSUBLOC):
	-mkdir $@
	-chmod $(DIRMOD) $@

uninstall:
	rm -f $(BINLOC)/$(TARGET) $(MANLOC)$(MANDIR)/vim.1 
	rm -f $(HELPSUBLOC)/vim_*.txt $(HELPSUBLOC)/vim_tags

# Clean up all the files that have been produced, except configure's
# We support common typing mistakes for Juergen! :-)
clean celan:
	-rm -f *.o core vim.core $(TARGET) 
	-rm -f osdef.h pathdef.c mkcmdtab cmdtab.h conftest* *~

shadow:	doc
	mkdir shadow
	cd shadow; ln -s ../*.[ch] ../*.in ../*.sh ../toolcheck ../proto ../*.tab ../configure .
	cd shadow; rm -f osdef.h config.h cmdtab.h pathdef.c
	cp Makefile shadow
	echo "the first targets to make vim are: scratch config myself" > shadow/config.mk

doc:
	ln -s ../doc .

# Start configure from scratch
scrub scratch:
	rm -f config.status config.cache config.h config.log

distclean: scratch clean
	echo "the first targets to make vim are: scratch config myself" > config.mk

tar: clean
	echo packing $(VIMVERSION) ...
	VIMVERSION=$(VIMVERSION); cd ../../..; set -x; \
	  tar cvf $$VIMVERSION.tar $$VIMVERSION; \
	  gzip -nf $$VIMVERSION.tar || gzip -f $$VIMVERSION.tar

dist: distclean tar

check:

mdepend:
	-@rm -f Makefile~
	cp Makefile Makefile~
	sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make
	@for i in $(ALL_SRC) ; do \
	  echo "$$i" ; \
	  echo `echo "$$i" | sed -e 's/.c$$/.o/'`": $$i" `\
            $(CPP) $$i |\
            grep '^# .*"\./.*\.h"' |\
            sort -t'"' -u +1 -2 |\
            sed -e 's/.*"\.\/\(.*\)".*/\1/'\
          ` >> tmp_make ; \
	done
	mv tmp_make Makefile

depend:
	-@rm -f Makefile~
	cp Makefile Makefile~
	sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make
	-for i in $(ALL_SRC); do echo $$i; \
			$(CPP_DEPEND) $$i >> tmp_make; done
	mv tmp_make Makefile

# use this in case the files have been transported via an MSDOS system

FILES = *.c *.h Makefile *.in makefile.* *.sh cmdtab.tab proto/*.pro tags configure

dos2unix:
	-mv arp_prot.h arp_proto.h
	-mv makefile.arc makefile.arch
	-mv makefile.dic makefile.dice
	-mv makefile.man makefile.manx
	-mv makefile Makefile
	-mv config_h.in config.h.in || mv configxh.in config.h.in || mv configh.in config.h.in
	-mv config_m.in config.mk.in || mv configxm.in config.mk.in || mv configmk.in config.mk.in
	-mv osdef1_h.in osdef1.h.in || mv osdef1xh.in osdef1.h.in || mv osdef1h.in osdef1.h.in
	-mv osdef2_h.in osdef2.h.in || mv osdef2xh.in osdef2.h.in || mv osdef2h.in osdef2.h.in
	-mv configur.in configure.in
	-mv configur configure
	-mv gui_moti.c gui_motif.c
	-mv gui_athe.c gui_athena.c
	-mv gui_at_s.c gui_at_sb.c
	-mv gui_at_s.h gui_at_sb.h
	for i in $(FILES); do tr -d '\r\032' < $$i > ~tmp~; mv ~tmp~ $$i; echo $$i; done

###########################################################################

# Used when .o files are in src directory
.c.o:
	$(CC) -c -I$(srcdir) $(ALL_CFLAGS) $<

# Used when .o files are in src/objects directory
#$(OBJ): $$(*F).c
#	$(CC) -c -I$(srcdir) $(ALL_CFLAGS) $(*F).c -o $@

osdef.h: osdef.sh config.h osdef1.h.in osdef2.h.in
	CC="$(CC) $(ALL_CFLAGS)" srcdir=${srcdir} sh $(srcdir)/osdef.sh

pathdef.c: Makefile config.mk
	-@echo creating pathdef.c
	-@echo '/* pathdef.c -- DO NOT EDIT! */' > pathdef.c
	-@echo '/* This file is automatically created by Makefile' >> pathdef.c
	-@echo ' * Change the Makefile only. */' >> pathdef.c
	-@echo '#include "vim.h"' >> pathdef.c
	-@echo '#ifndef SYS_VIMRC_FILE' >> pathdef.c
	-@echo 'char_u *sys_vimrc_fname = (char_u *)"$(SYS_VIMRC_FILE)";' >> pathdef.c
	-@echo '#else' >> pathdef.c
	-@echo 'char_u *sys_vimrc_fname = (char_u *)SYS_VIMRC_FILE;' >> pathdef.c
	-@echo '#endif' >> pathdef.c
	-@echo '#ifndef SYS_GVIMRC_FILE' >> pathdef.c
	-@echo 'char_u *sys_gvimrc_fname = (char_u *)"$(SYS_GVIMRC_FILE)";' >> pathdef.c
	-@echo '#else' >> pathdef.c
	-@echo 'char_u *sys_gvimrc_fname = (char_u *)SYS_GVIMRC_FILE;' >> pathdef.c
	-@echo '#endif' >> pathdef.c
	-@echo '#ifndef VIM_HLP' >> pathdef.c
	-@echo 'char_u *help_fname = (char_u *)"$(VIM_HLP)";' >> pathdef.c
	-@echo '#else' >> pathdef.c
	-@echo 'char_u *help_fname = (char_u *)VIM_HLP;' >> pathdef.c
	-@echo '#endif' >> pathdef.c
	-@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' >> pathdef.c

Makefile:
	@echo The name of the makefile MUST be "Makefile" (with capital M)!!!!

cmdtab.h: cmdtab.tab mkcmdtab
	./mkcmdtab cmdtab.tab cmdtab.h

mkcmdtab: mkcmdtab.c osdef.h
	$(CC) -I$(srcdir) $(ALL_CFLAGS) -o mkcmdtab mkcmdtab.c

###############################################################################
### (automatically generated by 'make depend')
### Dependencies:
alloc.o: alloc.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \
  macros.h structs.h gui.h globals.h proto.h regexp.h
buffer.o: buffer.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \
  macros.h structs.h gui.h globals.h proto.h regexp.h option.h
charset.o: charset.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \
  term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h
cmdcmds.o: cmdcmds.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \
  term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h
cmdline.o: cmdline.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \
  term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h cmdtab.h \
  ops.h
csearch.o: csearch.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \
  term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h
digraph.o: digraph.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \
  term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h
edit.o: edit.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \
  macros.h structs.h gui.h globals.h proto.h regexp.h option.h ops.h
fileio.o: fileio.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \
  macros.h structs.h gui.h globals.h proto.h regexp.h option.h
getchar.o: getchar.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \
  term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h
help.o: help.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \
  macros.h structs.h gui.h globals.h proto.h regexp.h option.h
linefunc.o: linefunc.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \
  term.h macros.h structs.h gui.h globals.h proto.h regexp.h
main.o: main.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \
  macros.h structs.h gui.h globals.h proto.h regexp.h option.h
mark.o: mark.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \
  macros.h structs.h gui.h globals.h proto.h regexp.h option.h
memfile.o: memfile.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \
  term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h
memline.o: memline.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \
  term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h
message.o: message.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \
  term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h
misccmds.o: misccmds.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \
  term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h
normal.o: normal.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \
  macros.h structs.h gui.h globals.h proto.h regexp.h option.h ops.h
ops.o: ops.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \
  macros.h structs.h gui.h globals.h proto.h regexp.h option.h ops.h
option.o: option.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \
  macros.h structs.h gui.h globals.h proto.h regexp.h option.h
pathdef.o: pathdef.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \
  term.h macros.h structs.h gui.h
quickfix.o: quickfix.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \
  term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h
regexp.o: regexp.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \
  macros.h structs.h gui.h globals.h proto.h regexp.h option.h
regsub.o: regsub.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \
  macros.h structs.h gui.h globals.h proto.h regexp.h
screen.o: screen.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \
  macros.h structs.h gui.h globals.h proto.h regexp.h option.h ops.h
search.o: search.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \
  macros.h structs.h gui.h globals.h proto.h regexp.h option.h ops.h
tables.o: tables.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \
  macros.h structs.h gui.h globals.h proto.h regexp.h option.h
tag.o: tag.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \
  macros.h structs.h gui.h globals.h proto.h regexp.h option.h
term.o: term.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \
  macros.h structs.h gui.h globals.h option.h proto.h regexp.h
undo.o: undo.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \
  macros.h structs.h gui.h globals.h proto.h regexp.h option.h
unix.o: unix.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \
  macros.h structs.h gui.h globals.h option.h proto.h regexp.h unixunix.h
version.o: version.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \
  term.h macros.h structs.h gui.h globals.h proto.h regexp.h
window.o: window.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \
  macros.h structs.h gui.h globals.h proto.h regexp.h option.h
gui.o: gui.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \
  macros.h structs.h gui.h globals.h proto.h regexp.h option.h
gui_motif.o: gui_motif.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \
  term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h ops.h
gui_x11.o: gui_x11.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \
  term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h ops.h
gui_athena.o: gui_athena.c vim.h config.h feature.h unix.h osdef.h ascii.h \
  keymap.h term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h \
  ops.h gui_at_sb.h
gui_at_sb.o: gui_at_sb.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \
  term.h macros.h structs.h gui.h gui_at_sb.h