HIDAPI + parser library for Windows, Linux, FreeBSD and Mac OS X

=========================================================

This version [1] is an extension of the original HIDAPI library, based on Tony Roggs fork [2],

which reads the report descriptor of the device.

The main addition is a parser which parses the retrieved report descriptor, populates a struct

with the element descriptors, and finally provides a data parsing function based on this.

In addition, a CMake build system has been made.

Some test examples are available:

* hidparsertest will list all devices and optionally open one, displaying the element information, and the incoming data

* hidapi2osc will send out the data via OSC (OpenSoundControl), and provides an OSC interface for listing, opening and closing devices (see the supercollider script for testing the interface), to enable building this, use the CMake build system, or pass the --enable-testosc flag to the configure script:

$ ./configure --enable-testosc

[1] https://github.com/sensestage/hidapi

[2] https://github.com/tonyrog/hidapi

TODO:

- creating + sending output reports

- creating + sending/reading + parsing feature reports

- reading windows report descriptor

- cmake lists for OSX, Windows and FreeBSD

Copyright (C) 2013, Marije Baalman <nescivi _at_ gmail.com>

This work was funded by a crowd-funding initiative for SuperCollider's [1] HID implementation

including a substantial donation from BEK, Bergen Center for Electronic Arts, Norway

[1] http://supercollider.sourceforge.net

[2] http://www.bek.no

HIDAPI library for Windows, Linux, FreeBSD and Mac OS X

=========================================================

About

======

HIDAPI is a multi-platform library which allows an application to interface

with USB and Bluetooth HID-Class devices on Windows, Linux, FreeBSD, and Mac

OS X. HIDAPI can be either built as a shared library (.so or .dll) or

can be embedded directly into a target application by adding a single source

file (per platform) and a single header.

HIDAPI has four back-ends:

* Windows (using hid.dll)

* Linux/hidraw (using the Kernel's hidraw driver)

* Linux/libusb (using libusb-1.0)

* FreeBSD (using libusb-1.0)

* Mac (using IOHidManager)

On Linux, either the hidraw or the libusb back-end can be used. There are

tradeoffs, and the functionality supported is slightly different.

Linux/hidraw (linux/hid.c):

This back-end uses the hidraw interface in the Linux kernel. While this

back-end will support both USB and Bluetooth, it has some limitations on

kernels prior to 2.6.39, including the inability to send or receive feature

reports. In addition, it will only communicate with devices which have

hidraw nodes associated with them. Keyboards, mice, and some other devices

which are blocked from having hidraw nodes will not work. Fortunately,

for nearly all the uses of hidraw, this is not a problem.

Linux/FreeBSD/libusb (libusb/hid-libusb.c):

This back-end uses libusb-1.0 to communicate directly to a USB device. This

back-end will of course not work with Bluetooth devices.

HIDAPI also comes with a Test GUI. The Test GUI is cross-platform and uses

Fox Toolkit (http://www.fox-toolkit.org). It will build on every platform

which HIDAPI supports. Since it relies on a 3rd party library, building it

is optional but recommended because it is so useful when debugging hardware.

What Does the API Look Like?

=============================

The API provides the the most commonly used HID functions including sending

and receiving of input, output, and feature reports. The sample program,

which communicates with a heavily hacked up version of the Microchip USB

Generic HID sample looks like this (with error checking removed for

simplicity):

#ifdef WIN32

#include <windows.h>

#endif

#include <stdio.h>

#include <stdlib.h>

#include "hidapi.h"

#define MAX_STR 255

int main(int argc, char* argv[])

{

int res;

unsigned char buf[65];

wchar_t wstr[MAX_STR];

hid_device *handle;

int i;

// Initialize the hidapi library

res = hid_init();

// Open the device using the VID, PID,

// and optionally the Serial number.

handle = hid_open(0x4d8, 0x3f, NULL);

// Read the Manufacturer String

res = hid_get_manufacturer_string(handle, wstr, MAX_STR);

wprintf(L"Manufacturer String: %s\n", wstr);

// Read the Product String

res = hid_get_product_string(handle, wstr, MAX_STR);

wprintf(L"Product String: %s\n", wstr);

// Read the Serial Number String

res = hid_get_serial_number_string(handle, wstr, MAX_STR);

wprintf(L"Serial Number String: (%d) %s\n", wstr[0], wstr);

// Read Indexed String 1

res = hid_get_indexed_string(handle, 1, wstr, MAX_STR);

wprintf(L"Indexed String 1: %s\n", wstr);

// Toggle LED (cmd 0x80). The first byte is the report number (0x0).

buf[0] = 0x0;

buf[1] = 0x80;

res = hid_write(handle, buf, 65);

// Request state (cmd 0x81). The first byte is the report number (0x0).

buf[0] = 0x0;

buf[1] = 0x81;

res = hid_write(handle, buf, 65);

// Read requested state

res = hid_read(handle, buf, 65);

// Print out the returned buffer.

for (i = 0; i < 4; i++)

printf("buf[%d]: %d\n", i, buf[i]);

// Finalize the hidapi library

res = hid_exit();

return 0;

}

If you have your own simple test programs which communicate with standard

hardware development boards (such as those from Microchip, TI, Atmel,

FreeScale and others), please consider sending me something like the above

for inclusion into the HIDAPI source. This will help others who have the

same hardware as you do.

License

========

HIDAPI may be used by one of three licenses as outlined in LICENSE.txt.

Download

=========

HIDAPI can be downloaded from github

git clone git://github.com/signal11/hidapi.git

Build Instructions

===================

This section is long. Don't be put off by this. It's not long because it's

complicated to build HIDAPI; it's quite the opposite. This section is long

because of the flexibility of HIDAPI and the large number of ways in which

it can be built and used. You will likely pick a single build method.

HIDAPI can be built in several different ways. If you elect to build a

shared library, you will need to build it from the HIDAPI source

distribution. If you choose instead to embed HIDAPI directly into your

application, you can skip the building and look at the provided platform

Makefiles for guidance. These platform Makefiles are located in linux/

libusb/ mac/ and windows/ and are called Makefile-manual. In addition,

Visual Studio projects are provided. Even if you're going to embed HIDAPI

into your project, it is still beneficial to build the example programs.

Prerequisites:

---------------

Linux:

-------

On Linux, you will need to install development packages for libudev,

libusb and optionally Fox-toolkit (for the test GUI). On

Debian/Ubuntu systems these can be installed by running:

sudo apt-get install libudev-dev libusb-1.0-0-dev libfox-1.6-dev

If you downloaded the source directly from the git repository (using

git clone), you'll need Autotools:

sudo apt-get install autotools-dev autoconf automake libtool

FreeBSD:

---------

On FreeBSD you will need to install GNU make, libiconv, and

optionally Fox-Toolkit (for the test GUI). This is done by running

the following:

pkg_add -r gmake libiconv fox16

If you downloaded the source directly from the git repository (using

git clone), you'll need Autotools:

pkg_add -r autotools

Mac:

-----

On Mac, you will need to install Fox-Toolkit if you wish to build

the Test GUI. There are two ways to do this, and each has a slight

complication. Which method you use depends on your use case.

If you wish to build the Test GUI just for your own testing on your

own computer, then the easiest method is to install Fox-Toolkit

using ports:

sudo port install fox

If you wish to build the TestGUI app bundle to redistribute to

others, you will need to install Fox-toolkit from source. This is

because the version of fox that gets installed using ports uses the

ports X11 libraries which are not compatible with the Apple X11

libraries. If you install Fox with ports and then try to distribute

your built app bundle, it will simply fail to run on other systems.

To install Fox-Toolkit manually, download the source package from

http://www.fox-toolkit.org, extract it, and run the following from

within the extracted source:

./configure && make && make install

Windows:

---------

On Windows, if you want to build the test GUI, you will need to get

the hidapi-externals.zip package from the download site. This

contains pre-built binaries for Fox-toolkit. Extract

hidapi-externals.zip just outside of hidapi, so that

hidapi-externals and hidapi are on the same level, as shown:

Parent_Folder

|

+hidapi

+hidapi-externals

Again, this step is not required if you do not wish to build the

test GUI.

Building HIDAPI into a shared library on Unix Platforms:

---------------------------------------------------------

On Unix-like systems such as Linux, FreeBSD, Mac, and even Windows, using

Mingw or Cygwin, the easiest way to build a standard system-installed shared

library is to use the GNU Autotools build system. If you checked out the

source from the git repository, run the following:

./bootstrap

./configure

make

make install <----- as root, or using sudo

If you downloaded a source package (ie: if you did not run git clone), you

can skip the ./bootstrap step.

./configure can take several arguments which control the build. The two most

likely to be used are:

--enable-testgui

Enable build of the Test GUI. This requires Fox toolkit to

be installed. Instructions for installing Fox-Toolkit on

each platform are in the Prerequisites section above.

--prefix=/usr

Specify where you want the output headers and libraries to

be installed. The example above will put the headers in

/usr/include and the binaries in /usr/lib. The default is to

install into /usr/local which is fine on most systems.

Building the manual way on Unix platforms:

-------------------------------------------

Manual Makefiles are provided mostly to give the user and idea what it takes

to build a program which embeds HIDAPI directly inside of it. These should

really be used as examples only. If you want to build a system-wide shared

library, use the Autotools method described above.

To build HIDAPI using the manual makefiles, change to the directory

of your platform and run make. For example, on Linux run:

cd linux/

make -f Makefile-manual

To build the Test GUI using the manual makefiles:

cd testgui/

make -f Makefile-manual

Building on Windows:

---------------------

To build the HIDAPI DLL on Windows using Visual Studio, build the .sln file

in the windows/ directory.

To build the Test GUI on windows using Visual Studio, build the .sln file in

the testgui/ directory.

To build HIDAPI using MinGW or Cygwin using Autotools, use the instructions

in the section titled "Building HIDAPI into a shared library on Unix

Platforms" above. Note that building the Test GUI with MinGW or Cygwin will

require the Windows procedure in the Prerequisites section above (ie:

hidapi-externals.zip).

To build HIDAPI using MinGW using the Manual Makefiles, see the section

"Building the manual way on Unix platforms" above.

HIDAPI can also be built using the Windows DDK (now also called the Windows

Driver Kit or WDK). This method was originally required for the HIDAPI build

but not anymore. However, some users still prefer this method. It is not as

well supported anymore but should still work. Patches are welcome if it does

not. To build using the DDK:

1. Install the Windows Driver Kit (WDK) from Microsoft.

2. From the Start menu, in the Windows Driver Kits folder, select Build

Environments, then your operating system, then the x86 Free Build

Environment (or one that is appropriate for your system).

3. From the console, change directory to the windows/ddk_build/ directory,

which is part of the HIDAPI distribution.

4. Type build.

5. You can find the output files (DLL and LIB) in a subdirectory created

by the build system which is appropriate for your environment. On

Windows XP, this directory is objfre_wxp_x86/i386.

Cross Compiling

================

This section talks about cross compiling HIDAPI for Linux using autotools.

This is useful for using HIDAPI on embedded Linux targets. These

instructions assume the most raw kind of embedded Linux build, where all

prerequisites will need to be built first. This process will of course vary

based on your embedded Linux build system if you are using one, such as

OpenEmbedded or Buildroot.

For the purpose of this section, it will be assumed that the following

environment variables are exported.

$ export STAGING=$HOME/out

$ export HOST=arm-linux

STAGING and HOST can be modified to suit your setup.

Prerequisites

--------------

Note that the build of libudev is the very basic configuration.

Build Libusb. From the libusb source directory, run:

./configure --host=$HOST --prefix=$STAGING

make

make install

Build libudev. From the libudev source directory, run:

./configure --disable-gudev --disable-introspection --disable-hwdb \

--host=$HOST --prefix=$STAGING

make

make install

Building HIDAPI

----------------

Build HIDAPI:

PKG_CONFIG_DIR= \

PKG_CONFIG_LIBDIR=$STAGING/lib/pkgconfig:$STAGING/share/pkgconfig \

PKG_CONFIG_SYSROOT_DIR=$STAGING \

./configure --host=$HOST --prefix=$STAGING

Signal 11 Software - 2010-04-11

2010-07-28

2011-09-10

2012-05-01

2012-07-03