# open2300.conf

#

# Configuration files for open2300 weather station tools

#

# Default locations in which the programs will search for this file:

# Programs search in this sequence:

# 1. Path to config file including filename given as parameter (not supported by all tools)

# 2. ./open2300.conf (current working directory)

# 3. /usr/local/etc/open2300.conf (typical Linux location)

# 4. /etc/open2300.conf (typical Linux location)

#

# All names are case sensitive!!!

# Set to your serial port and time zone

# For Windows use COM1, COM2, COM2 etc

# For Linux use /dev/ttyS0, /dev/ttyS1 etc

SERIAL_DEVICE COM1 # /dev/ttyS0, /dev/ttyS1, COM1, COM2 etc

TIMEZONE 1 # Hours Relative to UTC. East is positive, west is negative

# Units of measure (set them to your preference)

# The units of measure are ignored by wu2300 and cw2300 because both requires specific units

WIND_SPEED m/s # select MPH (miles/hour), m/s, or km/h

TEMPERATURE C # Select C or F

RAIN mm # Select mm or IN

PRESSURE hPa # Select hPa, mb or INHG

#### Citizens Weather variables (used only by cw2300)

# Format for latitude is

# [2 digit degrees][2 digit minutes].[2 decimals minutes - NOT seconds][N for north or S for south]

# Format for longitude is

# [3 digit degrees][2 digit minutes].[2 decimals minutes - NOT seconds][E for east or W for west]

# Use leading zeros to get the format ####.##N (lat) and #####.##E (long)

CITIZEN_WEATHER_ID CW0000 # CW0000 should be replaced by HAM call or actual CW number

CITIZEN_WEATHER_LATITUDE 5540.12N # DDMM.mmN or S - example 55 deg, 40.23 minutes north

CITIZEN_WEATHER_LONGITUDE 01224.60E # DDDMM.mmE or W - example 12 deg, 24.60 minutes east

APRS_SERVER rotate.aprs.net 14580 # These are the APRS servers and ports for

APRS_SERVER first.aprs.net 14580 # Citizens Weather reporting.

APRS_SERVER second.aprs.net 14580 # They they are tried in the entered order

APRS_SERVER third.aprs.net 14580 # you may enter up to 5 alternate servers

#### WEATHER UNDERGROUND variables (used only by wu2300)

WEATHER_UNDERGROUND_ID WUID # ID received from Weather Underground

WEATHER_UNDERGROUND_PASSWORD WUPASSWORD # Password for Weather Underground

### MYSQL Settings (only used by mysql2300)

MYSQL_HOST localhost # Localhost or IP address/host name

MYSQL_USERNAME open2300 # Name of the MySQL user that has access to the database

MYSQL_PASSWORD mysql2300 # Password for the MySQL user

MYSQL_DATABASE open2300 # Named of your database

MYSQL_PORT 0 # TCP/IP Port number. Zero means default