Please note: This is a modded version of the KLOR using soldered KS-27 switches instead of MX hotswap. I also removed the trackball support in the process to simplify routing
Everything below is the original README for the KLOR.
If you want to get the PCB made you need to download the ZIP and upload it to the website of the manufacture (JLCPCB or PCBway for example).
- download the ZIP file
- upload the ZIP file
- sometimes the Gerber preview from JLCPCB can't display the PCB, even when the files are fine. In this case use this dimensions: 159.8 mm* 118 mm
- PCB Thickness 1.6mm
- 2 layers
- PCB Qty as much as you like. But be aware, that you need 2 PCBs for one keyboard
- PCB Color Black
- No impedance control
- Surface Finish HASL(with lead) if you want the easiest soldering experience or LeadFree HASL.
- Remove Order Number Yes
If you only want to check the traces or see what is connected to which pin you can take a look at these graphics.
You can download the project if you need to take a deeper look or modify something. You need the Open Source software KiCad to open it.