qmk · fauxpark · Jun 16, 2023 · May 28, 2023 · May 28, 2023 · May 28, 2023
diff --git a/keyboards/0xcb/1337/config.h b/keyboards/0xcb/1337/config.h
@@ -24,7 +24,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   #define RGBLIGHT_HUE_STEP 8
   #define RGBLIGHT_SAT_STEP 8
   #define RGBLIGHT_VAL_STEP 8
-  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/0xcb/1337/info.json b/keyboards/0xcb/1337/info.json
@@ -21,6 +21,9 @@
   "qmk_lufa_bootloader": {
     "led": "B0"
   },
+  "rgblight": {
+    "sleep": true
+  },
   "ws2812": {
     "pin": "D3"
   },

diff --git a/keyboards/0xcb/tutelpad/config.h b/keyboards/0xcb/tutelpad/config.h
@@ -21,7 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_HUE_STEP 10            // The number of steps to cycle through the hue by
 #define RGBLIGHT_SAT_STEP 17            // The number of steps to increment the saturation by
 #define RGBLIGHT_VAL_STEP 17            // The number of steps to increment the brightness by
-#define RGBLIGHT_SLEEP                  // RGB will switch off when host goes to sleep
 
 #define RGBLIGHT_EFFECT_BREATHING       // Enable all additional RGB animation modes
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD

diff --git a/keyboards/0xcb/tutelpad/info.json b/keyboards/0xcb/tutelpad/info.json
@@ -11,6 +11,9 @@
     "bootmagic": {
         "matrix": [1, 0]
     },
+    "rgblight": {
+        "sleep": true
+    },
     "ws2812": {
         "pin": "D3"
     },

diff --git a/keyboards/1upkeyboards/1up60hse/config.h b/keyboards/1upkeyboards/1up60hse/config.h
@@ -31,7 +31,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

diff --git a/keyboards/1upkeyboards/1up60hse/info.json b/keyboards/1upkeyboards/1up60hse/info.json
@@ -18,6 +18,9 @@
         "levels": 5,
         "breathing": true
     },
+    "rgblight": {
+        "sleep": true
+    },
     "ws2812": {
         "pin": "F0"
     },

diff --git a/keyboards/1upkeyboards/super16/config.h b/keyboards/1upkeyboards/super16/config.h
@@ -23,7 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #        define RGBLIGHT_HUE_STEP 8
 #        define RGBLIGHT_SAT_STEP 8
 #        define RGBLIGHT_VAL_STEP 8
-#        define RGBLIGHT_SLEEP         /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 #        define RGBLIGHT_EFFECT_BREATHING
 #        define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #        define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/1upkeyboards/super16/info.json b/keyboards/1upkeyboards/super16/info.json
@@ -11,6 +11,9 @@
   "ws2812": {
     "pin": "D3"
   },
+  "rgblight": {
+    "sleep": true
+  },
   "rgb_matrix": {
     "driver": "WS2812"
   },

diff --git a/keyboards/25keys/aleth42/rev0/config.h b/keyboards/25keys/aleth42/rev0/config.h
@@ -21,7 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
    #define RGBLIGHT_HUE_STEP 8
    #define RGBLIGHT_SAT_STEP 8
    #define RGBLIGHT_VAL_STEP 8
-   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 #    define RGBLIGHT_EFFECT_BREATHING
 #    define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #    define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/25keys/aleth42/rev0/info.json b/keyboards/25keys/aleth42/rev0/info.json
@@ -13,6 +13,9 @@
             {"pin_a": "B5", "pin_b": "B4"}
         ]
     },
+    "rgblight": {
+        "sleep": true
+    },
     "ws2812": {
         "pin": "C7"
     },

diff --git a/keyboards/25keys/aleth42/rev1/config.h b/keyboards/25keys/aleth42/rev1/config.h
@@ -21,7 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
    #define RGBLIGHT_HUE_STEP 8
    #define RGBLIGHT_SAT_STEP 8
    #define RGBLIGHT_VAL_STEP 8
-   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 #    define RGBLIGHT_EFFECT_BREATHING
 #    define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #    define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/25keys/aleth42/rev1/info.json b/keyboards/25keys/aleth42/rev1/info.json
@@ -13,6 +13,9 @@
             {"pin_a": "F5", "pin_b": "F6"}
         ]
     },
+    "rgblight": {
+        "sleep": true
+    },
     "ws2812": {
         "pin": "B3"
     },

diff --git a/keyboards/25keys/cassette42/config.h b/keyboards/25keys/cassette42/config.h
@@ -21,7 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
 #    define RGBLIGHT_VAL_STEP 8
-#    define RGBLIGHT_SLEEP         /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 #    define RGBLIGHT_EFFECT_BREATHING
 #    define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #    define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/25keys/cassette42/info.json b/keyboards/25keys/cassette42/info.json
@@ -14,6 +14,9 @@
             {"pin_a": "B3", "pin_b": "B1"}
         ]
     },
+    "rgblight": {
+        "sleep": true
+    },
     "ws2812": {
         "pin": "D3"
     },

diff --git a/keyboards/abacus/config.h b/keyboards/abacus/config.h
@@ -23,7 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
 #    define RGBLIGHT_VAL_STEP 8
-#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 /*== choose animations ==*/
 #    define RGBLIGHT_EFFECT_BREATHING
 #    define RGBLIGHT_EFFECT_RAINBOW_MOOD

diff --git a/keyboards/abacus/info.json b/keyboards/abacus/info.json
@@ -18,6 +18,9 @@
             {"pin_a": "F1", "pin_b": "F0"}
         ]
     },
+    "rgblight": {
+        "sleep": true
+    },
     "ws2812": {
         "pin": "D1"
     },

diff --git a/keyboards/abstract/ellipse/rev1/config.h b/keyboards/abstract/ellipse/rev1/config.h
@@ -21,7 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
    #define RGBLIGHT_HUE_STEP 8
    #define RGBLIGHT_SAT_STEP 8
    #define RGBLIGHT_VAL_STEP 8
-   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

diff --git a/keyboards/abstract/ellipse/rev1/info.json b/keyboards/abstract/ellipse/rev1/info.json
@@ -24,6 +24,9 @@
         "pin": "C6",
         "levels": 15
     },
+    "rgblight": {
+        "sleep": true
+    },
     "ws2812": {
         "pin": "E6"
     },

diff --git a/keyboards/acekeyboard/titan60/config.h b/keyboards/acekeyboard/titan60/config.h
@@ -21,7 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
 #    define RGBLIGHT_VAL_STEP 8
-#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 #    define RGBLIGHT_EFFECT_BREATHING
 #    define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #    define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/acekeyboard/titan60/info.json b/keyboards/acekeyboard/titan60/info.json
@@ -17,6 +17,9 @@
       "pin": "B7",
       "breathing": true
     },
+    "rgblight": {
+      "sleep": true
+    },
     "ws2812": {
       "pin": "D0"
     },

diff --git a/keyboards/acheron/elongate/beta/config.h b/keyboards/acheron/elongate/beta/config.h
@@ -21,7 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   #define RGBLIGHT_HUE_STEP 8
   #define RGBLIGHT_SAT_STEP 8
   #define RGBLIGHT_VAL_STEP 8
-#    define RGBLIGHT_SLEEP       /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 #    define RGBLIGHT_EFFECT_BREATHING
 #    define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #    define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/acheron/elongate/beta/info.json b/keyboards/acheron/elongate/beta/info.json
@@ -8,6 +8,9 @@
         "pid": "0x454C",
         "device_version": "0.0.1"
     },
+    "rgblight": {
+        "sleep": true
+    },
     "ws2812": {
         "pin": "D7"
     },

diff --git a/keyboards/acheron/elongate/delta/config.h b/keyboards/acheron/elongate/delta/config.h
@@ -22,7 +22,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PAL_MODE 1
 
 #define RGBLED_NUM 16
-#define RGBLIGHT_SLEEP
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/acheron/elongate/delta/info.json b/keyboards/acheron/elongate/delta/info.json
@@ -20,7 +20,8 @@
         "breathing_period": 3
     },
     "rgblight": {
-        "max_brightness": 200
+        "max_brightness": 200,
+        "sleep": true
     },
     "ws2812": {
         "pin": "B15"

diff --git a/keyboards/ada/ada1800mini/config.h b/keyboards/ada/ada1800mini/config.h
@@ -21,7 +21,6 @@
     #define RGBLIGHT_HUE_STEP 8
     #define RGBLIGHT_SAT_STEP 8
     #define RGBLIGHT_VAL_STEP 8
-    #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/ada/ada1800mini/info.json b/keyboards/ada/ada1800mini/info.json
@@ -12,7 +12,8 @@
         "pin": "F0"
     },
     "rgblight": {
-        "max_brightness": 200
+        "max_brightness": 200,
+        "sleep": true
     },
     "matrix_pins": {
         "cols": ["F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "B3", "B2", "B1"],

diff --git a/keyboards/ada/infinity81/config.h b/keyboards/ada/infinity81/config.h
@@ -7,7 +7,6 @@
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
 #    define RGBLIGHT_VAL_STEP 8
-#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/ada/infinity81/info.json b/keyboards/ada/infinity81/info.json
@@ -8,6 +8,9 @@
         "pid": "0x0081",
         "device_version": "0.0.1"
     },
+    "rgblight": {
+        "sleep": true
+    },
     "ws2812": {
         "pin": "D0"
     },

diff --git a/keyboards/adpenrose/kintsugi/config.h b/keyboards/adpenrose/kintsugi/config.h
@@ -24,7 +24,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
 #    define RGBLIGHT_VAL_STEP 8
-#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 #    define RGBLIGHT_EFFECT_BREATHING
 #    define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #    define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/adpenrose/kintsugi/info.json b/keyboards/adpenrose/kintsugi/info.json
@@ -8,6 +8,9 @@
         "pid": "0x0001",
         "device_version": "1.0.0"
     },
+    "rgblight": {
+        "sleep": true
+    },
     "ws2812": {
         "pin": "F1"
     },

diff --git a/keyboards/adpenrose/obi/config.h b/keyboards/adpenrose/obi/config.h
@@ -10,7 +10,6 @@
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
 #    define RGBLIGHT_VAL_STEP 8
-#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 #    define RGBLIGHT_EFFECT_BREATHING
 #    define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #    define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/adpenrose/obi/info.json b/keyboards/adpenrose/obi/info.json
@@ -7,6 +7,9 @@
         "pid": "0x0002",
         "vid": "0x4450"
     },
+    "rgblight": {
+        "sleep": true
+    },
     "ws2812": {
         "pin": "F7"
     },

diff --git a/keyboards/ai03/polaris/config.h b/keyboards/ai03/polaris/config.h
@@ -21,7 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   #define RGBLIGHT_HUE_STEP 8
   #define RGBLIGHT_SAT_STEP 8
   #define RGBLIGHT_VAL_STEP 8
-  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 #    define RGBLIGHT_EFFECT_BREATHING
 #    define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #    define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/ai03/polaris/info.json b/keyboards/ai03/polaris/info.json
@@ -19,7 +19,8 @@
         "breathing": true
     },
     "rgblight": {
-        "max_brightness": 200
+        "max_brightness": 200,
+        "sleep": true
     },
     "ws2812": {
         "pin": "D2"

diff --git a/keyboards/ai03/voyager60_alps/config.h b/keyboards/ai03/voyager60_alps/config.h
@@ -18,7 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
   #define RGBLIGHT_HUE_STEP 8
   #define RGBLIGHT_SAT_STEP 8
   #define RGBLIGHT_VAL_STEP 8
-  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 
 /*
  * Feature disable options

diff --git a/keyboards/ai03/voyager60_alps/info.json b/keyboards/ai03/voyager60_alps/info.json
@@ -8,6 +8,9 @@
         "pid": "0x060A",
         "device_version": "0.0.1"
     },
+    "rgblight": {
+        "sleep": true
+    },
     "ws2812": {
         "pin": "D2"
     },

diff --git a/keyboards/alf/x11/config.h b/keyboards/alf/x11/config.h
@@ -21,7 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   #define RGBLIGHT_HUE_STEP 8
   #define RGBLIGHT_SAT_STEP 8
   #define RGBLIGHT_VAL_STEP 8
-  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 #    define RGBLIGHT_EFFECT_BREATHING
 #    define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #    define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/alf/x11/info.json b/keyboards/alf/x11/info.json
@@ -17,6 +17,9 @@
     "pin": "B7",
     "breathing": true
   },
+  "rgblight": {
+    "sleep": true
+  },
   "ws2812": {
     "pin": "F7"
   },

diff --git a/keyboards/alfredslab/swift65/hotswap/config.h b/keyboards/alfredslab/swift65/hotswap/config.h
@@ -20,7 +20,6 @@
     #define RGBLIGHT_HUE_STEP 8
     #define RGBLIGHT_SAT_STEP 8
     #define RGBLIGHT_VAL_STEP 8
-    #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 /*== all animations enable ==*/
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD

diff --git a/keyboards/alfredslab/swift65/hotswap/info.json b/keyboards/alfredslab/swift65/hotswap/info.json
@@ -8,6 +8,9 @@
         "pid": "0xD4C4",
         "device_version": "0.0.1"
     },
+    "rgblight": {
+        "sleep": true
+    },
     "ws2812": {
         "pin": "D2"
     },

diff --git a/keyboards/alfredslab/swift65/solder/config.h b/keyboards/alfredslab/swift65/solder/config.h
@@ -21,7 +21,6 @@
     #define RGBLIGHT_HUE_STEP 8
     #define RGBLIGHT_SAT_STEP 8
     #define RGBLIGHT_VAL_STEP 8
-    #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 #    define RGBLIGHT_EFFECT_BREATHING
 #    define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #    define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/alfredslab/swift65/solder/info.json b/keyboards/alfredslab/swift65/solder/info.json
@@ -9,7 +9,8 @@
         "device_version": "0.0.1"
     },
     "rgblight": {
-        "max_brightness": 100
+        "max_brightness": 100,
+        "sleep": true
     },
     "ws2812": {
         "pin": "D2"

diff --git a/keyboards/alpine65/config.h b/keyboards/alpine65/config.h
@@ -23,7 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LOCKING_RESYNC_ENABLE
 
 #define RGBLED_NUM 68
-#define RGBLIGHT_SLEEP
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/alpine65/info.json b/keyboards/alpine65/info.json
@@ -9,7 +9,8 @@
         "device_version": "0.0.1"
     },
     "rgblight": {
-        "max_brightness": 200
+        "max_brightness": 200,
+        "sleep": true
     },
     "ws2812": {
         "pin": "B15"