Smart Buoy code developed as a proof of concept. This solution is built for the FX30. This solution uses the FX30 and an Oceaninstruments hydrophone. The audio data from the hydrophone is read in X3 compressed form and sent to a server over the cellular network. It uses the QUIC (HTTP3) protocol for communication. The server will decompress the X3 audio and create a .wav and a .png spectrogram. A .json file will also be created, this contains details about the incoming recording and the buoy status.

This repository contains all the code to orchestrate the above.

/src/

Rust code for the FX30 and the server.

/src/bin/server

The Rust server to listen to the FX30. It can listen to multiple FX30s.

/src/bin/buoy

The code which runs on the FX30.

/legato/SMS_Controller

This is C code using the Legato framework for the FX30. The scripts can be found in fx30/home/root/sms_scripts. This code will listen to incoming SMSs and do various actions:

• "REBOOT" - reboot the FX30.
• "ULPM N" - switch to ultra low power mode for N seconds.
• "UPGRADE" - connect to the server to download the latest version.

/legato/TaringaComponent

This will start the Rust code on boot.

Connect the power cable. Connect the USB of the PC to the micro-USB of the FX30. The FX30 will create a network connection. On the PC you should see a new network interface with an IP address. You can use the following command to ssh into the FX30.

ssh root@192.168.2.2

# no password is required

The cm (Cellular Modem) tool helps create a connection.

Common commands are:

cm data info      # Get info
cm data connect   # Connect the device to the network (need to update iptables).

On Ubuntu machines, you made need to uninstall modemmanager to be able to ssh to the modem. And other software needs to be installed

sudo apt purge modemmanager
sudo apt autoremove

# Install - required for serialport-rs
sudo apt install libudev-dev pkg-config

# For testing the hydrophone on a desktop machine you need to run the following
# Then you need to REBOOT!!
sudo usermod -a -G dialout $USER
sudo usermod -a -G tty $USER

For something like wget google.com to work, you need to update the iptables.

# This will clear all INPUT filters.
iptables -F INPUT

# Disable ethernet
echo 0 > /sys/class/gpio/gpio55/value

# Disable the power LED
echo 0 > /sys/class/gpio/gpio49/value
echo 1 > /sys/class/gpio/gpio50/value
echo 1 > /sys/class/gpio/gpio51/value

# Disable the GPS: See: https://forum.sierrawireless.com/t/fx30-how-to-turn-off-gps/15961
#echo 0 > /sys/class/gpio/gpio52/value

# Disable the radio
cm radio off

You can send an SMS to the device (you need the phone number). The SMS can run different commands. Below are the commands that can be executed.

Upgrade:

UPGRADE [upgrade_version_code]

Example: "UPGRADE 201906061858-d0d5a6"

Reboot the device:

REBOOT

Go into Ultra Low Power Mode:

ULPM [time_seconds]

To manually run the GPS, ssh to the FX30 and run the following commands:

killall buoy    # This will kill the buoy process

gnss fix        # This will run `gnss enable` and `gnss start`
gnss get loc2d

The GPS commands can be found here: https://docs.legato.io/latest/toolsTarget_gnss.html

Install linaro compiler collection to /opt/gcc-linaro-arm-linux-gnueabihf.

The use the following to compile:

CC=/opt/gcc-linaro-arm-linux-gnueabihf/bin/arm-linux-gnueabihf-gcc cargo build --target=armv7-unknown-linux-musleabihf --release

then copy it to the FX30.

cd scripts
./deploy-fx30.sh

# Get the server up and running
DOMAIN=localhost cargo run --bin server

# Get the server up and running
DOMAIN=localhost cargo run --bin buoy

Get the latest firmware from here.

It will download as mcu-rmfw-boot-yocto-legato_wp85.cwe.

The release notes explain the steps, but this will work too.

scp mcu-rmfw-boot-yocto-legato_wp85.cwe root@192.168.2.2:/home/root
ssh root@192.168.2.2

# now you're in the FX30

fwupdate download mcu-rmfw-boot-yocto-legato_wp85.cwe

# This will take a couple of minutes to be able to log back in.

Based the isntructions on this page.

• Create an Ubuntu 16.04 Virtual Machine.

  • It will require around 12GB disk space.
  • Set up a 2nd Network Adapter as a "Bridged Adapter" with the FX30 network card as the interface.

• Run the following steps

wget https://downloads.sierrawireless.com/tools/leaf/leaf_latest.deb -O /tmp/leaf_latest.deb
sudo apt install /tmp/leaf_latest.deb

leaf search -t stable -t wp85     # This will display the latest stable releases
leaf setup wp85stable -p swi-wp85_2.0.5    # Choose the most recent stable release

• Install the Java dependancies
• Download and install Legato Dev Environment Release 15 (Legato 16.10.4), from here:
• Compile the taringa-legato and deploy it to the FX30.

Smart-Buoy - connects marine sounds to the cloud.
Copyright (C) 2020  Simon M. Werner (Anemoi Robotics Ltd)

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <https://www.gnu.org/licenses/>.