Skip to content
/ MIP Public
forked from LIJI32/MIP

MIP – macOS Injection Platform

License

Notifications You must be signed in to change notification settings

orion1vi/MIP

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

47 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

MIP

MIP, macOS Injection Platform, is a platform that lets macOS developers create operating system tweaks by allowing them to create code that can be injected automatically to any GUI process. MIP was originally written as part of my unreleased macOS theming mechanism, because other techniques could not inject code in an early enough and reliable timing which allows all theming features. MIP was later rewritten to be more stable, generic and versatile, as well as easier to maintain, and became open source (MIT).

Disclaimer

Code injection is dangerous, and might make your computer unstable or unsable if you don't know what you're doing. Use MIP with care. In case of emergency, delete /Library/LaunchDaemons/local.lsdinjector.plist using the recovery boot.

MIP should work on all 64-bit versions of macOS, but it's deliberately limited to Yosemite and newer; released versions were not tested on versions older than Sierra.

MIP's Advantages

MIP has the following advantages when comparing to other injection techniques:

  • Injects to every single GUI process, including non-apps processes such as system processes with GUI, the dock, tab processes of browsers, etc.
  • Injects to restricted binaries (binaries using a __RESTRICT,__restrict section or special entitlements, where dyld enviroment variables are ignored)
  • The injected code runs on the main thread, and blocks it until it finishes initializing; preventing race bugs.
  • The injected code is always injected at a deterministic time, in the same code flow for every app, making code easier to debug
  • The injected code runs at a very early stage in the process's lifetime, before the UI frameworks start running, making advanced UI customizations possible
  • Can be installed without reboot
  • Does not modify any system file on disk and can be easily uninstalled without rebooting
  • Does not use DYLD_INSERT_LIBRARIES, which may break the system if a file is deleted.
  • Works with both 32- and 64-bit applications, and allows injection to Garbage Collected processes (On El Capitan and older, GC was removed in Sierra)
  • Supports every macOS major up to and including Sonoma
  • Supports ARM64-based Macs
  • Supports injection to translated Rosetta 2 processes

How To Compile

You will need Xcode's command-line tools, as well as binutils for gobjcopy (brew install binutils), which should be linked as gobjcopy. You will also need a signing identity, which may be self-signed. Not signing MIP binaries properly will make your system unstable! On Intel Macs, you will need the 10.13 SDK, to compile the 32-bit portions of MIP.

To compile, simply run make SIGN_IDENTITY=<codesign identity> inside the MIP folder, or make SYSROOT=path/to/MacOSX10.13.sdk SIGN_IDENTITY=<codesign identity> on Intel Macs.

How To Install/Uninstall

MIP requires disabling SIP (System Integrity Protection) both during installation and during use. On ARM64 Macs, you will also need to enable the arm64e preview ABI (sudo nvram boot-args=-arm64e_preview_abi)

To install, simply run make install inside the MIP folder. You can uninstall by running make uninstall". If you can't get a terminal to open due a misconfiguration of MIP, you can disable it by deleting /Library/LaunchDaemons/local.lsdinjector.plist using the recovery boot, which will disable MIP.

Bundles are installed to /Library/Apple/System/Library/Frameworks/mip/Bundles.

Why Must I Disable SIP?

SIP not only prevents system files and folders from being modified, but also prevents debugging of any SIP-protected binary. Code injection, by definition, requires static (on filesystem) or dynamic (via debugging) modification of binary files, and MIP obviously cannot operate with such limitations. Even if you do not intend to inject code to Apple provided binaries, MIP operates by injecting code to a system process (launchservicesd), which later injects code to all other processes.

In El Capitan, MIP can be modified to run with SIP enabled as long as it was disabled during installation, due to task ports being leaked to launchservicesd via XPC messages, but this is neither recommended nor supported, and requires modifying launchservicesd's launchd plist file. This potential vulnerability was fixed in Sierra.

Sample Bundles

MIP includes Alt-Zoom as both a useful tweak and a bundle development reference. Alt-Zoom is a bundle that lets you modify the default behavior of the zoom button and the way modifier keys affect its behavior. You can install it by running make SIGN_IDENTITY=<codesign identity> and make install in Alt-Zoom's folder in the repository. It has a setting app to control its configuration.

Injection Filters

The processes a bundle is loaded into are determined by that bundle's Info.plist file. By default MIP filters in a white-list manner. The following keys are used to control filtering:

  • MIPBundleNames - Array, lists bundle names to inject alongside (or to ignore in black-list mode).
    • This can be either an app or framework bundle identifier, such as com.apple.AppKit
  • MIPExcludedBundleNames - Array, lists bundle names to never inject alongside.
    • Takes precedence over all other filters
    • Not affected by black-list mode
  • MIPExecutableNames - Array, controls the executable basenames to inject to (or to ignore in black-list mode).
  • MIPUseBlacklistMode - Boolean, sets the filtering mode to black-list mode if true.
  • MIPSupportsGC - Boolean, tells MIP the injected bundle supports Garbage Collection and may be injected to GC-enabled processes. If incorrectly set to true while the injected bundle does not actually support GC, the injected bundle will crash the process. Garbage Collection is not available in macOS Sierra's Objective-C runtime, no need to support it if you're targeting Sierra and newer.

Additionally, because bundles are installed on a system-wide basis (For security reasons, some Apple-signed binarys will intentionally crash when loading libraries not owned by root), a user may disable a specific bundle by creating a plist file at ~/Library/MIP/settings.plist with an array MIPDisabledBundles set to a list of the disabled bundle identifiers.

How It Works

During installation, MIP installs 4 files; lsdinjector.dylib and loader.dylib, a command line utility called inject, and a launch daemon.

inject is a command line utility that allows injecting a dylib file to a running process by PID. The launch daemon MIP installs runs inject as root when the system boots, and injects lsdinjector.dylib to launchservicesd.

When a Cocoa process launches, one of the early things it does is calling _LSApplicationCheckIn. This function sends an XPC message to launchserivcesd, and blocks until it receives a reply. lsdinjector.dylib hooks the function in launchservicesd that handles that XPC message. The hook will inject loader.dylib to the process before it sends a reply, so the process is still blocked during the injection. This uses the same code as the inject utility.

When the reply is sent, the process resumes running at the injected code, running loader.dylib's initializer which loads all tweak bundles. When loader.dylib finishes, the process' normal operation resumes.

This method of injection ensures the injected code always runs in the same flow and in the same thread.

To make sure all libraries, bundles and user settings and data are accessible from every process the user runs, even under very strict sandboxing, all MIP data is located in /Library/Apple/System/Library/Frameworks/mip. User data is located in /Library/Apple/System/Library/Frameworks/mip/user_data/UID, with the correct owner. A symlink to this folder is created in ~/Library/MIP for each user for convenience, but bundles should use the real path directly.

How The Inject Function Works

The inject function both lsdinjector.dylib and inject use works by modifying the main thread's state to simulate a call instruction.

First, it copies a payload bootstrap code to the process (On Intel Macs, x86 or x86-64 code, depending on the processes), as well as a pointer to dyld's load address and the path of the dylib to inject. Then, it pauses the thread (to ensure atomicity) and modifies its PC/IP, SP and stack contents to simulate a call instruction to the entry function of the payload, and resumes the thread.

The payload function is a compiled but unlinked C code, so it can't used any external symbols such as dlopen directly. It is declared in a way that saves and restores all registers, and does additional calls to save and restore the flags register as well. The function uses the dyld pointer provided by the injector to find a pointer to dyld's dlopen function, and then calls it with the provided dylib path.

Upgrading Notes

If you were using an old version on MIP that used /usr/lib/mip as its data directory on macOS Mojave or older, upon upgrading to macOS Catalina or newer MIP bundles that linked against /usr/lib/mip/loader.dylib will cease functioning. They must be recompiled and linked against /Library/Apple/System/Library/Frameworks/mip/loader.dylib instead.

About

MIP – macOS Injection Platform

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C 59.4%
  • Objective-C 26.0%
  • Makefile 14.6%