masternodes · eloygil · Sep 27, 2018 · Sep 27, 2018 · Sep 27, 2018 · Sep 27, 2018
diff --git a/README.md b/README.md
@@ -4,15 +4,10 @@ The **Nodemaster** scripts is a collection of utilities to manage, setup and upd
 
 I am quite confident this is the single best and almost effortless way to setup different crypto masternodes, without bothering too much about the setup part.
 
-If this script helped you in any way, please contribute some feedback. BTC donations also welcome and never forget:
+If this script helped you in any way, please contribute some feedback. Never forget:
 
 **Have fun, this is crypto after all!**
 
-```
-BTC  33ENWZ9RCYBG7nv6ac8KxBUSuQX64Hx3x3
-```
-
-
 Feel free to use my reflink to signup and receive a bonus w/ vultr:
 <a href="https://www.vultr.com/?ref=6903922"><img src="https://www.vultr.com/media/banner_2.png" width="468" height="60"></a>
 
@@ -99,6 +94,12 @@ These are only a couple of examples for typical setups. Check my [easy step-by-s
 ./install.sh -p pivx -c 2 -s
 ```
 
+**Install 2 PIVX masternodes using binary build instead of compiling the source code:**
+
+```bash
+./install.sh -p pivx -c 2 -b
+```
+
 ## Options
 
 The _install.sh_ script support the following parameters:
@@ -108,6 +109,7 @@ The _install.sh_ script support the following parameters:
 | --project    | -p           | project, e.g. "pix" | shortname for the project                                           |
 | --net        | -n           | "4" / "6"           | ip type for masternode. (ipv)6 is default                           |
 | --release    | -r           | e.g. "tags/v3.0.4"  | a specific git tag/branch, defaults to latest tested                |
+| --binary     | -b           | --                  | use linux binaries instead of compiling from source code            |
 | --count      | -c           | number              | amount of masternodes to be configured                              |
 | --update     | -u           | --                  | update specified masternode daemon, combine with -p flag            |
 | --sentinel   | -s           | --                  | install and configure sentinel for node monitoring                  |
@@ -148,14 +150,10 @@ I activated the "[issues](https://github.com/masternodes/vps/issues)" option on
 
 I might not be able to reply immediately, but i do usually within a couple of days at worst. I will also happily take any pull requests that make masternode installations easier for everyone ;-)
 
-If this script helped you in any way, please contribute some feedback. BTC donations also welcome and never forget:
+If this script helped you in any way, please contribute some feedback. Never forget:
 
 **Have fun, this is crypto after all!**
 
-```
-BTC  33ENWZ9RCYBG7nv6ac8KxBUSuQX64Hx3x3
-```
-
 ## Management script (not yet implemented)
 
 The management script release will follow within the next couple of days.
@@ -173,17 +171,12 @@ The management script release will follow within the next couple of days.
 
 * provide my Dockerfile & Vagrantfile
 * write more test cases
-* implement a binary option (?)
 * output all supported cryptos as list within help
 
 # Errors
 
 * currently not fully idempotent
 
-Ping me at contact@marsmenschen.com for questions and send some crypto my way if you are happy.
+Ping me at contact@marsmenschen.com for questions.
 
 **Have fun, this is crypto after all!**
-
-```
-BTC  33ENWZ9RCYBG7nv6ac8KxBUSuQX64Hx3x3
-```
diff --git a/install.sh b/install.sh
@@ -7,8 +7,9 @@
 #  ╚═╝  ╚═══╝ ╚═════╝ ╚═════╝ ╚══════╝╚═╝     ╚═╝╚═╝  ╚═╝╚══════╝   ╚═╝   ╚══════╝╚═╝  ╚═╝
 #                                                              ╚╗ @marsmensch 2016-2018 ╔╝
 #
-# version 	v0.9.9
-# date    	2018-06-09
+# version 	v0.9.9.1
+# date    	2018-09-27
+# edited by     Eloy Gil (hello@eloygil.com)
 #
 # function:	part of the masternode scripts, source the proper config file
 #
@@ -22,11 +23,11 @@
 # Twitter 	@marsmensch
 
 # Useful variables
-declare -r CRYPTOS=`ls -l config/ | egrep '^d' | awk '{print $9}' | xargs echo -n; echo`
+#declare -r CRYPTOS=`ls -l config/ | egrep '^d' | awk '{print $9}' | xargs echo -n; echo`
 declare -r DATE_STAMP="$(date +%y-%m-%d-%s)"
 declare -r SCRIPTPATH="$(cd $(dirname ${BASH_SOURCE[0]}) > /dev/null; pwd -P)"
 declare -r MASTERPATH="$(dirname "${SCRIPTPATH}")"
-declare -r SCRIPT_VERSION="v0.9.9"
+declare -r SCRIPT_VERSION="v0.9.9.1"
 declare -r SCRIPT_LOGFILE="/tmp/nodemaster_${DATE_STAMP}_out.log"
 declare -r IPV4_DOC_LINK="https://www.vultr.com/docs/add-secondary-ipv4-address"
 declare -r DO_NET_CONF="/etc/network/interfaces.d/50-cloud-init.cfg"
@@ -44,7 +45,6 @@ cat << "EOF"
                                                              ╚╗ @marsmensch 2016-2018 ╔╝
 EOF
 echo "$(tput sgr0)$(tput setaf 3)Have fun, this is crypto after all!$(tput sgr0)"
-echo "$(tput setaf 6)Donations (BTC): 33ENWZ9RCYBG7nv6ac8KxBUSuQX64Hx3x3"
 echo "Questions: marsmensch@protonmail.com$(tput sgr0)"
 }
 
@@ -74,11 +74,12 @@ function show_help(){
     showbanner
     echo "install.sh, version $SCRIPT_VERSION";
     echo "Usage example:";
-    echo "install.sh (-p|--project) string [(-h|--help)] [(-n|--net) int] [(-c|--count) int] [(-r|--release) string] [(-w|--wipe)] [(-u|--update)] [(-x|--startnodes)]";
+    echo "install.sh (-p|--project) string [(-h|--help)] [(-b|--binary)] [(-n|--net) int] [(-c|--count) int] [(-r|--release) string] [(-w|--wipe)] [(-u|--update)] [(-x|--startnodes)]";
     echo "Options:";
     echo "-h or --help: Displays this information.";
+    echo "-b or --binary: Tries to install using linux precompiled binaries.";
     echo "-p or --project string: Project to be installed. REQUIRED.";
-    echo "-n or --net: IP address type t be used (4 vs. 6).";
+    echo "-n or --net: IP address type to be used (4 vs. 6).";
     echo "-c or --count: Number of masternodes to be installed.";
     echo "-r or --release: Release version to be installed.";
     echo "-s or --sentinel: Add sentinel monitoring for a node type. Combine with the -p option";
@@ -107,6 +108,10 @@ function check_distro() {
     fi
 }
 
+function install_basic_packages() {
+    apt-get -qqy -o=Dpkg::Use-Pty=0 -o=Acquire::ForceIPv4=true install jp2a &>> ${SCRIPT_LOGFILE}
+}
+
 #
 # /* no parameters, installs the base set of packages that are required for all projects */
 #
@@ -120,7 +125,7 @@ function install_packages() {
     libcurl4-gnutls-dev protobuf-compiler libboost-all-dev autotools-dev automake \
     libboost-all-dev libssl-dev make autoconf libtool git apt-utils g++ \
     libprotobuf-dev pkg-config libudev-dev libqrencode-dev bsdmainutils \
-    pkg-config libgmp3-dev libevent-dev jp2a pv virtualenv libdb4.8-dev libdb4.8++-dev  &>> ${SCRIPT_LOGFILE}
+    pkg-config libgmp3-dev libevent-dev pv virtualenv libdb4.8-dev libdb4.8++-dev  &>> ${SCRIPT_LOGFILE}
 
     # only for 18.04 // openssl
     if [[ "${VERSION_ID}" == "18.04" ]] ; then
@@ -144,7 +149,7 @@ if [ $(free | awk '/^Swap:/ {exit !$2}') ] || [ ! -f "/var/mnode_swap.img" ];the
     swapon /var/mnode_swap.img &>> ${SCRIPT_LOGFILE}
     echo '/var/mnode_swap.img none swap sw 0 0' | tee -a /etc/fstab &>> ${SCRIPT_LOGFILE}
     echo 'vm.swappiness=10' | tee -a /etc/sysctl.conf               &>> ${SCRIPT_LOGFILE}
-    echo 'vm.vfs_cache_pressure=50' | tee -a /etc/sysctl.conf		&>> ${SCRIPT_LOGFILE}
+    echo 'vm.vfs_cache_pressure=50' | tee -a /etc/sysctl.conf	    &>> ${SCRIPT_LOGFILE}
 else
     echo "* All good, we have a swap"
 fi
@@ -315,9 +320,7 @@ function create_control_configuration() {
     rm -f /tmp/${CODENAME}_masternode.conf &>> ${SCRIPT_LOGFILE}
     # create one line per masternode with the data we have
     for NUM in $(seq 1 ${count}); do
-		cat >> /tmp/${CODENAME}_masternode.conf <<-EOF
-			${CODENAME}MN${NUM} [${IPV6_INT_BASE}:${NETWORK_BASE_TAG}::${NUM}]:${MNODE_INBOUND_PORT} MASTERNODE_PRIVKEY_FOR_${CODENAME}MN${NUM} COLLATERAL_TX_FOR_${CODENAME}MN${NUM} OUTPUT_NO_FOR_${CODENAME}MN${NUM}
-		EOF
+        echo "${CODENAME}MN${NUM} [${IPV6_INT_BASE}:${NETWORK_BASE_TAG}::${NUM}]:${MNODE_INBOUND_PORT} MASTERNODE_PRIVKEY_FOR_${CODENAME}MN${NUM} COLLATERAL_TX_FOR_${CODENAME}MN${NUM} OUTPUT_NO_FOR_${CODENAME}MN${NUM}" >> /tmp/${CODENAME}_masternode.conf
     done
 
 }
@@ -330,32 +333,31 @@ function create_systemd_configuration() {
     echo "* (over)writing systemd config files for masternodes"
     # create one config file per masternode
     for NUM in $(seq 1 ${count}); do
-    PASS=$(date | md5sum | cut -c1-24)
-        echo "* (over)writing systemd config file ${SYSTEMD_CONF}/${CODENAME}_n${NUM}.service"  &>> ${SCRIPT_LOGFILE}
-		cat > ${SYSTEMD_CONF}/${CODENAME}_n${NUM}.service <<-EOF
-			[Unit]
-			Description=${CODENAME} distributed currency daemon
-			After=network.target
-
-			[Service]
-			User=${MNODE_USER}
-			Group=${MNODE_USER}
-
-			Type=forking
-			PIDFile=${MNODE_DATA_BASE}/${CODENAME}${NUM}/${CODENAME}.pid
-			ExecStart=${MNODE_DAEMON} -daemon -pid=${MNODE_DATA_BASE}/${CODENAME}${NUM}/${CODENAME}.pid -conf=${MNODE_CONF_BASE}/${CODENAME}_n${NUM}.conf -datadir=${MNODE_DATA_BASE}/${CODENAME}${NUM}
-
-			Restart=always
-			RestartSec=5
-			PrivateTmp=true
-			TimeoutStopSec=60s
-			TimeoutStartSec=5s
-			StartLimitInterval=120s
-			StartLimitBurst=15
-
-			[Install]
-			WantedBy=multi-user.target
-		EOF
+        PASS=$(date | md5sum | cut -c1-24)
+        SYSTEMD_CONF_FILE=${SYSTEMD_CONF}/${CODENAME}_n${NUM}.service
+        echo "* (over)writing systemd config file ${SYSTEMD_CONF_FILE}"  &>> ${SCRIPT_LOGFILE}
+        echo "[Unit]" > ${SYSTEMD_CONF_FILE}
+        echo "Description=${CODENAME} distributed currency daemon" >> ${SYSTEMD_CONF_FILE}
+        echo "After=network.target" >> ${SYSTEMD_CONF_FILE}
+        echo "" >> ${SYSTEMD_CONF_FILE}
+        echo "[Service]" >> ${SYSTEMD_CONF_FILE}
+        echo "User=${MNODE_USER}" >> ${SYSTEMD_CONF_FILE}
+        echo "Group=${MNODE_USER}" >> ${SYSTEMD_CONF_FILE}
+        echo "" >> ${SYSTEMD_CONF_FILE}
+        echo "Type=forking" >> ${SYSTEMD_CONF_FILE}
+        echo "PIDFile=${MNODE_DATA_BASE}/${CODENAME}${NUM}/${CODENAME}.pid" >> ${SYSTEMD_CONF_FILE}
+        echo "ExecStart=${MNODE_DAEMON} -daemon -pid=${MNODE_DATA_BASE}/${CODENAME}${NUM}/${CODENAME}.pid -conf=${MNODE_CONF_BASE}/${CODENAME}_n${NUM}.conf -datadir=${MNODE_DATA_BASE}/${CODENAME}${NUM}" >> ${SYSTEMD_CONF_FILE}
+        echo "" >> ${SYSTEMD_CONF_FILE}
+        echo "Restart=always" >> ${SYSTEMD_CONF_FILE}
+        echo "RestartSec=5" >> ${SYSTEMD_CONF_FILE}
+        echo "PrivateTmp=true" >> ${SYSTEMD_CONF_FILE}
+        echo "TimeoutStopSec=60s" >> ${SYSTEMD_CONF_FILE}
+        echo "TimeoutStartSec=5s" >> ${SYSTEMD_CONF_FILE}
+        echo "StartLimitInterval=120s" >> ${SYSTEMD_CONF_FILE}
+        echo "StartLimitBurst=15" >> ${SYSTEMD_CONF_FILE}
+        echo "" >> ${SYSTEMD_CONF_FILE}
+        echo "[Install]" >> ${SYSTEMD_CONF_FILE}
+        echo "WantedBy=multi-user.target" >> ${SYSTEMD_CONF_FILE}
     done
 
 }
@@ -365,9 +367,9 @@ function create_systemd_configuration() {
 #
 function set_permissions() {
 
-	# maybe add a sudoers entry later
-	mkdir -p /var/log/sentinel &>> ${SCRIPT_LOGFILE}
-	chown -R ${MNODE_USER}:${MNODE_USER} ${MNODE_CONF_BASE} ${MNODE_DATA_BASE} /var/log/sentinel ${SENTINEL_BASE}/database &>> ${SCRIPT_LOGFILE}
+    # maybe add a sudoers entry later
+    mkdir -p /var/log/sentinel &>> ${SCRIPT_LOGFILE}
+    chown -R ${MNODE_USER}:${MNODE_USER} ${MNODE_CONF_BASE} ${MNODE_DATA_BASE} /var/log/sentinel ${SENTINEL_BASE}/database &>> ${SCRIPT_LOGFILE}
     # make group permissions same as user, so vps-user can be added to masternode group
     chmod -R g=u ${MNODE_CONF_BASE} ${MNODE_DATA_BASE} /var/log/sentinel &>> ${SCRIPT_LOGFILE}
 
@@ -496,7 +498,7 @@ function source_config() {
             NETWORK_TYPE=4
             echo "WARNING:"
             echo "You selected IPv4 for networking but there is no automatic workflow for this part."
-            echo "This means you will have some mamual work to do to after this configuration run."
+            echo "This means you will have some manual work to do to after this configuration run."
             echo ""
             echo "See the following link for instructions how to add multiple ipv4 addresses on vultr:"
             echo "${IPV4_DOC_LINK}"
@@ -521,9 +523,16 @@ function source_config() {
             prepare_mn_interfaces
             swaphack
         fi
-        install_packages
+        install_basic_packages
+        if [ "$binary" -ne 1 ]; then
+            install_packages
+        fi
         print_logo
-        build_mn_from_source
+        if [ "$binary" -eq 1 ]; then
+            install_mn_from_binary
+        else
+            build_mn_from_source
+        fi
         if [ "$update" -eq 0 ]; then
             create_mn_user
             create_mn_dirs
@@ -564,6 +573,49 @@ function print_logo() {
 
 }
 
+function install_mn_from_binary() {
+
+    TMP_DIR=/tmp/binary
+    mkdir -p $TMP_DIR
+    cd $TMP_DIR
+    BASE_GITHUB_API="https://api.github.com/repos"
+    GITHUB_USER_NAME=$(echo ${GIT_URL} | awk -F 'github.com/' '{ print $2 }' | awk -F '/' '{ print $1 }')
+    GITHUB_REPO_FULL=$(echo ${GIT_URL} | awk -F 'github.com/' '{ print $2 }' | awk -F '/' '{ print $2 }')
+    GITHUB_REPO_NAME=${GITHUB_REPO_FULL%.git}
+    BINARY_URL=$(curl -s ${BASE_GITHUB_API}/${GITHUB_USER_NAME}/${GITHUB_REPO_NAME}/releases/latest | grep linux | grep x86_64 | grep url | awk -F '"' '{ print $4 }')
+    if [ -z ${BINARY_URL+x} ]; then 
+        echo "[ERROR] Failed to find Linux binaries for ${project}. Try compiling from source files."
+        exit
+    fi
+    echo "* Downloading linux binaries from ${BINARY_URL}..."
+    BINARY_FILE=$(echo $BINARY_URL | awk -F '/' '{ print $NF }')
+    wget --quiet -O $BINARY_FILE $BINARY_URL
+    echo "* Done."
+    if [ ${BINARY_FILE: -7} == ".tar.gz" ]; then
+        tar xzvf $BINARY_FILE 
+    elif [ ${BINARY_FILE: -4} == ".zip" ]; then
+        unzip $BINARY_FILE
+    else
+        "[ERROR] Unexpected file extension. Aborting..."
+        exit
+    fi
+    if [ $(find -type d -name bin | wc -l ) -eq 1 ]; then 
+        cp -r $(find -type d -name bin)/* /usr/local/bin/
+    else
+        echo "[ERROR] Unexpected file content. Aborting..."
+        exit
+    fi
+    if [ $(find -type d -name lib | wc -l ) -eq 1 ]; then
+        cp -r $(find -type d -name lib)/* /usr/local/lib/
+    fi
+    if [ $(find -type d -name include | wc -l ) -eq 1 ]; then
+        cp -r $(find -type d -name include)/* /usr/local/include/
+    fi
+    cd ${SCRIPTPATH}
+    rm -rf $TMP_DIR
+
+}
+
 #
 # /* no parameters, builds the required masternode binary from sources. Exits if already exists and "update" not given  */
 #
@@ -749,7 +801,7 @@ sentinel=0;
 startnodes=0;
 
 # Execute getopt
-ARGS=$(getopt -o "hp:n:c:r:wsudx" -l "help,project:,net:,count:,release:,wipe,sentinel,update,debug,startnodes" -n "install.sh" -- "$@");
+ARGS=$(getopt -o "hp:n:c:r:wbsudx" -l "help,project:,net:,count:,release:,wipe,binary,sentinel,update,debug,startnodes" -n "install.sh" -- "$@");
 
 #Bad arguments
 if [ $? -ne 0 ];
@@ -802,6 +854,10 @@ while true; do
             shift;
                     wipe="1";
             ;;
+        -b|--binary)
+            shift;
+                    binary="1";
+            ;;
         -s|--sentinel)
             shift;
                     sentinel="1";