English | 中文

• Configuration
• Current Status
  • Clover
  • OpenCore
• Installation
  • Identify Your Model
  • First-time installation
  • Build
  • Upgrade
• Improvements
• FAQ
• Changelog
• Credits
• Support and discussion

• Hibernation may trigger serious boot problems on CML machines, view #661 and #694
  • Users should run sudo pmset -a hibernatemode 0 to disable hibernate mode, also see README_CML
• HDMI may not work when you first-time plug it in
  • You have to re-plug it, or close the lid for about five seconds and reopen the lid
• Ethernet may not work on macOS10.15+, view #256
• On macOS10.15+, you need to update Wireless-USB-Adapter Driver
  • If you are not using macOS10.15+, it's still recommended to update the driver above
• Discrete graphic card is not working, since macOS doesn't support Optimus technology
  • Have used SSDT-DDGPU to disable it in order to save power
• Fingerprint sensor is not working
  • Have used SSDT-USB to disable it in order to save power
• Intel Bluetooth does not support some Bluetooth devices
  • On macOS12+, Intel Bluetooth supports more Bluetooth 4.x devices
  • View Work-Around-with-Bluetooth
  • You can also try IOBluetoothFixup, IntelBluetoothFamily, and OpenFirmwareManager from AppleBluetooth; read IntelBluetoothFamily Usage
• Intel Wi-Fi works with low performance
  • macOS Big Sur or higher is recommended; macOS version < 11 needs to rebuild kextcache and restart if Intel Wi-Fi does not work
  • Buy a USB Wi-Fi dongle or supported wireless card
  • Read Frequently Asked Questions for more information
• Realtek USB SD Card Reader works with some setups
  • Read FAQ for more information and add RealtekCardReader + RealtekCardReaderFriend
  • Or you can instead use VMware to let it work, see 2.0 Setup SD Card Reader
• Everything else works well

• TM1701 & TM1707: Supports macOS10.15 ~ macOS12
  • v1.5.9 is the last EFI version that supports macOS High Sierra & Mojave
• TM1905 & TM1963: Supports macOS10.15 ~ macOS12

• Have to choose ~ via Preboot to boot Big Sur
• Should Clean NVRAM after using OpenCore
  • Press Space in OpenCore boot page, and then select Reset NVRAM entry
  • Then reboot and use Clover
• r5127 do not support Intel Wi-Fi on macOS version < Big Sur due to incomplete ForceKextsToLoad functionality (Only v1.4.7 supports Intel Wi-Fi on old macOS versions, or you can add IO80211Family.kext to the kext folder)

• TM1701 & TM1707: Supports macOS10.15 ~ macOS13
  • v1.5.9 is the last EFI version that supports macOS High Sierra & Mojave
• TM1905 & TM1963: Supports macOS10.15 ~ macOS13

• Should Clean NVRAM after using Clover
  • Press Space in OpenCore boot page, and then select Reset NVRAM entry
• Limited theme
• Some people have trouble updating to Windows 11, see #665
• Recommend Reading: Security and FileVault | OpenCore Post-Install and OpenCore Configuration, especially the UEFI Secure Boot section

If you are using XiaoMi-Pro with 8th Gen CPU, then it's a KBL (Kaby Lake) machine. (Actually Kaby Lake Refresh)
If you are using XiaoMi-Pro with 10th Gen CPU, then it's a CML (Comet Lake) machine.
You will need this information when you download the EFI release.

• Please refer to the following installation tutorials
  • Xiaomi Mi Notebook Pro High Sierra 10.13.6
  • Xiaomi Mi Notebook Pro MacOS Catalina Installation Guide || ENGLISH
• or video tutorials
  • Xiaomi NoteBook PRO HACKINTOSH INSTALLATION GUIDE !!!
  • GUIA HACKINTOSH ESPAÑOL 2020 || Instalación de macOS Catalina Xiaomi Mi Notebook Pro
• Complete EFI packs are available in the releases page.
• Please don't clone or download the main branch for daily use.

Build the latest beta EFI by running the following command in Terminal:

sh -c "$(curl -fsSL https://raw.githubusercontent.com/daliansky/XiaoMi-Pro-Hackintosh/main/makefile.sh)"

Or run the following command in Terminal:

git clone --depth=1 https://github.com/daliansky/XiaoMi-Pro-Hackintosh.git
cd XiaoMi-Pro-Hackintosh
./makefile.sh

Some advanced usages are:

# Build EFI with kexts and OpenCore in Debug version
./makefile.sh --debug_KextOC
# Ignore errors when the script is running
./makefile.sh --ignore_err
# Bundled with Chinese verison Docs
./makefile.sh --lang=zh_CN
# Generate EFI release for Comet Lake model
./makefile.sh --model=CML
# Preserve work files during the building stage
./makefile.sh --no_clean_up
# Use GitHub API
./makefile.sh --gh_api
# Build the latest beta EFI with pre-release kexts
./makefile.sh --pre_release=Kext
# Build the latest beta EFI with pre-release OpenCore
./makefile.sh --pre_release=OC

• If you are using XiaoMi-Pro with 8th Gen CPU, then it's a KBL (Kaby Lake) machine. (Actually Kaby Lake Refresh)
• If you are using XiaoMi-Pro with 10th Gen CPU, then it's a CML (Comet Lake) machine.

• Download the latest EFI release from the release page or beta EFI release from artifacts in the action page.
• Mount EFI partition by running sudo diskutil list first to find your EFI partition identifier and then running sudo diskutil mount diskXsX (X is your EFI partition identifier)
• A complete replacement of BOOT and OC(or CLOVER) folders is required. Delete these two folders and copy them from the release pack.

• Use Hackintool to inject EDID (AAPL00,override-no-connect)
• Change #enable-backlight-smoother to enable-backlight-smoother in config.plist to adjust the panel brightness smoothly
• Use xzhih's one-key-hidpi to improve quality of system UI
  • Support 1424x802 HiDPI resolution
  • TM1701: On macOS > 10.13.6, to enable higher HiDPI resolution (<=1520x855), you need to use DVMT_and_0xE2_fix to set DVMT to 64mb
• Add forceRenderStandby=0 in config - NVRAM - Add - 7CXXX - boot-args (OpenCore) or config - Boot - Arguments (Clover) if NVMe Kernel Panic CSTS=0xffffffff occurs
• Use NVMeFix to enable APST on NVMe SSDs
• TM1701 & TM1707: Use ALCPlugFix to fix unworking jack after replug
• TM1701: Use DVMT_and_0xE2_fix to enable 4K external monitor and more "native" power management

Starts from VoodooI2C v2.4.1, the click down action is emulated to force touch, which causes the failure of click down and drag and right click gestures. You can turn off Force Click in SysPref - Trackpad, and I recommend enabling three finger drag in SysPref - Accessibility - Mouse & Trackpad - Trackpad Options.

If you have black screen for five minutes and get no response from the device, please force restart your laptop(Long press power button) and choose Boot macOS Install from ~ entry.

A reset of NVRAM is recommended. For Clover users, press Fn+F11 when you are in Clover boot page.
For OC users, press Space key when you are in OpenCore boot page and choose Reset NVRAM. If this does not work, you can try to set SecureBootModel to Disabled in config.plist.

For OC users, on macOS11+, SecureBootModel has to be Default to get OEM update from SysPref. However, some machines can not boot when SecureBootModel = Default. In this case, go to App Store and search Monterey (or newer macOS).

For Clover users, press Fn+F11 when you are in Clover boot page. Then Clover will refresh nvram.plist, and lock message should be removed.
For OC users, press Esc to enter the boot menu during startup. Then, press Space key and choose Reset NVRAM.

It is not recommended to open FileVault. You can press Fn+F3 in the Clover boot page and choose the icon with FileVault. Then you can boot in the system and close FileVault.

First, in macOS, open SysPref - Startup Disk. Choose the target system.
Then, open /EFI/OC/config.plist, and turn off ShowPicker.
When you want to switch OS, press Esc during startup to call the boot menu.

Open config.plist and change value of LauncherOption from Full to System.

Change #AudioDxe.efi to AudioDxe.efi in config.plist - UEFI - Drivers.
Enable AudioSupport in config.plist - UEFI - Audio.
If you are using macOS Big Sur, go to SysPref - Sound and turn on Play sound on startup.
For macOS version < Big Sur, open Terminal.app and run sudo nvram StartupMute=%00.

You can view Changelog for detailed information.

• Thanks to 0xFireWolf for providing RealtekCardReader and RealtekCardReaderFriend.
• Thanks to Acidanthera for providing AppleALC, BrcmPatchRAM, HibernationFixup, Lilu, NVMeFix, OcBinaryData, OpenCorePkg, RestrictEvents, VirtualSMC, VoodooInput, VoodooPS2, and WhateverGreen.
• Thanks to agasecond and htmambo for valuable suggestions on 10th Gen model.
• Thanks to apianti, blackosx, blusseau, dmazar, and slice2009 for providing Clover.
• Thanks to daliansky for providing OC-little.
• Thanks to FallenChromium, jackxuechen, Javmain, johnnync13, IlikemacOS, ManuGithubSteam, MarFre22, Menchen, Pasi-Studio, qeeqez, and williambj1 for valuable suggestions on 8th Gen model.
• Thanks to hieplpvip and syscl for providing samples of DSDT patches.
• Thanks to OpenIntelWireless for providing AirportItlwm and IntelBluetoothFirmware.
• Thanks to RehabMan for providing OS-X-Clover-Laptop-Config, and OS-X-Null-Ethernet.
• Thanks to RehabMan and Sniki for providing EAPD-Codec-Commander.
• Thanks to VoodooI2C for providing VoodooI2C.

Mi Notebooks supported by other projects:

• Mi-Gaming-Laptop by johnnync13
• Mi-NB-Air-125-6y30 by johnnync13
• Mi-NB-Air-125-7y30 by influenist
• Mi-NB-Air-133-Gen1 by johnnync13
• Mi-NB-Air-133-2018 by johnnync13

tonymacx86.com:

• [Guide] Xiaomi Mi Notebook Pro High Sierra 10.13.6

QQ:

• 247451054 小米PRO黑苹果高级群
• 137188006 小米PRO黑苹果
• 689011732 小米笔记本Pro黑苹果