From 307b8581e75e555fd12570b5515e0e09ff9a725b Mon Sep 17 00:00:00 2001 From: Josh Johnson Date: Sat, 15 Aug 2020 22:01:28 +1000 Subject: [PATCH] update link --- Documents/keyboard-assembly.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documents/keyboard-assembly.md b/Documents/keyboard-assembly.md index cae9593..a51a0e0 100644 --- a/Documents/keyboard-assembly.md +++ b/Documents/keyboard-assembly.md @@ -47,7 +47,7 @@ Place the rectangular spacer underneath the top cover, followed by the PCB. Then ## Step 3: Solder Outside Keys With parts flush with each other, solder in the four keyswitches to keep everything in place. Before soldering in a key, confirm both legs are poking through the PCB as it is much harder to fix after you have soldered one leg in. (Note: image is of different key, just highlighting what to check for). -![Soldering corner keys](imgs/assembly-instructions/step-3.JPG) +![Checking pins are visible](imgs/assembly-instructions/step-3.JPG) ## Step 4: Install and Solder Remaining Keys