This is a program for visualisation of Gadget N-body simulation snapshots. It can read Gadget type 1, type 2 and HDF5 snapshots and provides an interactive display of the particle distribution, optionally with SPH type smoothing and colouring by any quantity that can be read from the snapshot.

There are facilities to pick out populations of particles by various properties (e.g. temperature, density etc in SPH runs), to follow particles between snapshots, and to make movies.

It can be used with other simulation codes which produce Gadget-like snapshots, such as AREPO and SWIFT, and has been used to visualize the EAGLE and Illustris simulations.

This package uses a configure script generated using GNU Autoconf. If you downloaded a release .tar.gz file (which would have a filename along the lines of gadgetviewer-X.Y.Z.tar.gz) then the configure script has already been generated and is included.

You can get a summary of the available options by running

./configure --help

In the unlikely event that all of the dependencies are installed in standard locations and you don't need any special compiler flags, you might get away with just doing

./configure --prefix=path
make
make install

where path is the directory where the program should be installed.

Since the configure script and related files are machine generated they are not included in the git repository. If you acquired the code by cloning the git repository or using the download source option on github then you'll need to ensure that you have autoconf, automake and libtool installed and run the autogen.sh script in the source directory. This will generate the configure script which can be run as described above.

In order to compile the program you need at least a C compiler, a Fortran 90 compiler, and the GTK+ 2.0 GUI library. The program also has several optional dependencies:

• HDF5 : allows reading of HDF5 snapshots
• libpng: required for writing out movie frames and screenshots
• PlPlot: to make scatterplots and histograms of particle properties (plplot is no longer necessary as gadgetviewer can use Cairo, which is a dependency of Gtk, instead)

If any of these are missing, some features will be unavailable. The configure script generates a warning for each library which can't be found.

The compilers to use can be specified by setting the following environment variables before running the configure script:

• CC - C compiler
• CFLAGS - C compiler flags
• FC - Fortran 90 compiler
• FCFLAGS - Fortran compiler flags

By default the configure script will add some compiler flags which are usually helpful. These are used in addition to anything you specify with the FCFLAGS and CFLAGS environment variables. If this causes problems you can configure with

--disable-optimization --disable-heap-arrays --disable-openmp

to prevent it adding extra flags.

The program can make use of multiple processor cores using OpenMP if your Fortran compiler supports it. The configure script should now detect OpenMP if it is available.

If that doesn't work you could try adding your compiler's OpenMP flag to the FCFLAGS environment variable before running configure (e.g. -fopenmp for gfortran or -openmp for ifort).

If libraries are installed in non-standard locations (i.e. not somewhere like /usr/lib), the following parameters can be used to tell configure where to find the libraries:

    --with-hdf5=...           - specify path to HDF5
    --with-plplot=...         - specify path to PlPlot
    --with-png=...            - specify path to libpng

The supplied directory should contain the 'include' and 'lib' subdirectories for the corresponding library. E.g. if libhdf5.so is in /opt/local/hdf5/current/lib/ then you would use

./configure --with-hdf5=/opt/local/hdf5/current/

The program can be compiled without a particular library by doing something like:

./configure --without-hdf5

If you're having problems linking a library you can use the LIBS and LDFLAGS environment variables to pass extra flags to the linker.

Some points to note:

• To read snapshots larger than 2Gb the program needs to be compiled in 64 bit mode, in which case all of the libraries need to be compiled as 64 bit too (this should no longer be a problem now that most systems are 64 bit).

• Libraries installed by a package manager sometimes don't include the header files which are necessary to compile anything that uses the library. It may be necessary to install a separate "dev" package with the headers.

• gfortran will compile this program but you need at least version 4.2 to be able to read binary snapshots. Stream I/O is not implemented in 4.1.

Compiling the code with the Intel compilers and installing to our own home directory (assuming we're using the bash shell):

./configure CC=icc FC=ifort --prefix=$HOME/.local/
make
make install

To configure for debugging with gdb:

./configure FCFLAGS='-g -check all -fpe0 -warn -traceback -debug extended' \
            CFLAGS='-g -warn -traceback -debug extended' --prefix=$HOME/.local/ \
            --disable-optimization

Note that PlPlot is not required if Cairo is available (which it usually is).

If you're having problems compiling PlPlot then as a last resort you could try disabling features that the gadget file viewer doesn't need. To do this, pass the following parameters to cmake:

    -DENABLE_tcl=OFF
    -DENABLE_cxx=OFF
    -DENABLE_gnome2=OFF
    -DENABLE_wxwidgets=OFF
    -DENABLE_DYNDRIVERS=OFF
    -DPLD_gcw=OFF
    -DPLD_wxwidgets=OFF
    -DPLD_hp7470=OFF
    -DPLD_hp7580=OFF
    -DPLD_lj_hpgl=OFF

Gadgetviewer just needs the Fortran interface and the 'mem' output driver, which is built in and can't be disabled.

It should now be possible to use any HDF5 1.6 or later installation. Only the C interface is used, so it doesn't matter if the HDF5 Fortran interface was not built or was built with a different compiler.

If HDF5 is compiled without compression support then compressed HDF5 snapshots will be unreadable.

The name of a snapshot file to read can be specified on the command line or a file can be selected through the File menu. If the file is part of a multi file snapshot then the other files will be read too. Binary (type 1 and type 2) and HDF5 snapshots can be read.

Positions, IDs and masses are always read for all particles. Other particle properties may also be loaded depending on the file format (see 2.8 below).

By default the program shows up to 2,000,000 particles. If there are more than this a random sample is shown. If you zoom in on a particular region of the simulation you can make it draw the sample from just this region by clicking the resample button. Alternatively you can activate the automatic resampling option in the View menu. This resamples the particles whenever the zoom factor changes by some amount. Its best not to use this in conjunction with the smoothed density plot because the smoothing lengths are recalculated whenever the particles are resampled.

The maximum number of particles to show can be changed with the View/View parameters option.

To use it with a stereoscopic display which expects side by side images, load a snapshot then select "Side by side stereo" from the View menu and press the full screen button at the top of the window. A slider on the toolbar allows you to adjust the eye separation to get a comfortable 3D effect.

Select "Make movie" from the options menu. "Rotating movie" makes a movie of the particle distribution rotating about the selected point. "Evolving movie" loops over a range of snapshots and makes one frame per snapshot, optionally re-centering the view on the selected particles before calculating each frame. It writes out the frames as png files so you need to use something like mencoder to encode the movie.

Evolving movies will look best if you ensure that the sampling rate is 100% before making the movie. Otherwise you get a lot of flickering because it uses a different random sample for each frame.

"Select particles" under the Options menu allows you to highlight particles according to property values and/or their distance from the selected point. It uses the IDs from the snapshot file to identify particles, so if you have a simulation where the IDs are not unique you may get strange results. For example, any particle with the same ID as a selected particle will be selected too. Particles stay selected when you change snapshots, so you can use this to identify progenitors of a particular halo, for example.

It is possible to select up to six different sets of particles simultaneously. The drop down box at the top of the "Select particles" window allows you to specify which set to operate on, and you can specify a name and a colour for each one. The chosen colour is used to highlight the selected particles in the main display and in the graph window (see below).

"Make plot" in the options menu allows you to plot a histogram of the values of a particle property or to make a scatterplot of one property against another (e.g. temperature vs density). Particles in the current sample are shown in red and each set of selected particles is shown in the appropriate colour for that set. The plot will update automatically if you choose a different sample, change snapshots or modify a selection.

If the property plotted on the x or y axis cannot be loaded for the current snapshot the graph window will be blank.

Most of the code (with the exception of the octree construction on startup) has been parallelised with OpenMP. Multiple processor cores should be used automatically if your compiler supports OpenMP. You can set the number of threads to use via the OpenMP entry in the Options menu.

If you have a HDF5 snapshot with extra particle properties (ages, metallicities etc) there are two ways to make it read the extra datasets.

First, you can specify the extra datasets on the command line. E.g.

gadgetviewer --datasets=Temperature,Density,Metallicity ./snapshot_010.0.hdf5

If you'd rather make the program always read certain datasets if they're present, then you can put the dataset names in the file

.gadgetviewer_settings/gadget_hdf5_extra_properties

in your home directory. Note that duplicate dataset names or names which conflict with quantities which are always read (e.g. Mass, ID) will be silently ignored. The default file contains

[Gadget HDF5]
Extra Properties=Metallicity;StarFormationRate;Temperature;Density;InternalEnergy

The program will read these quantities for each type of particle in the snapshot which has a corresponding HDF5 dataset.

You can specify which blocks should be read from type 2 binary snapshots by editing the file

.gadgetviewer_settings/gadget_binary_type2_blocks

in your home directory. The default file looks like this:

[Gadget Type 2 Binary]
NBlocks=3;

[U]
Displayed Name=InternalEnergy;
Particle Types=0;
Data Type=REAL;

[RHO]
Displayed Name=Density;
Particle Types=0;
Data Type=REAL;

[HSML]
Displayed Name=SmoothingLength;
Particle Types=0;
Data Type=REAL;

For each block you need to provide

• Four character tag for this block (in [] above)
• Name of the particle property stored in the block ("Displayed Name")
• Which particle types this property applies to ("Particle Types", a semicolon delimited list of integers in the range 0-5)
• Data type - this should be REAL or INTEGER. The precision of the data (4 or 8 byte) is detected using the record markers in the file.

Note that vector quantities (e.g. accelerations) cannot be read in this way. There is no need to specify the POS, VEL, ID and MASS blocks because they are always read in anyway. Entries with names or tags that conflict with the standard set of blocks will be ignored.

Its not possible to read additional particle properties from type 1 snapshots because there is no way for the program to determine which extra blocks are present.

Halo finder output can be read using the options under 'Read Groups' in the File menu. Select a format, then select a file from the set generated by the halo finder. The program will read the halo finder output corresponding to the currently open snapshot and add one or more new particle properties which indicate which halo each particle belongs to.

To colour particles by halo membership, select the 'colour by property' plot type, select to colour by the appropriate dataset in the settings window, and tick the 'use random colours for integer properties' box. The Randomize button can be used to reject unacceptable colour schemes. You can also use the 'Select particles' option in the Options menu to pick out particles in particular groups.

On changing snapshots the halo finder output for the new snapshot will be read automatically. This depends on the files being written with a similar naming convention to Gadget snapshots. Any instances of the snapshot number in the path must be padded to at least three digits with leading zeros and preceded by an underscore.

See below for the supported halo finder formats.

The program can read binary output from certain (old) versions of the SubFind halo finder. The formats which can be read are:

• L-Gadget group_tab files - FoF groups as in the Millennium simulation
• L-SubFind sub_tab files - subfind groups as in the Millennium simulation
• P-Gadget3 group_tab - FoF groups as in the Aquarius simulations
• P-Gadget3 subhalo_tab - subfind groups as in the Aquarius simulations

The P-Gadget3 options wont work if the code wrote double precision outputs or if certain preprocessor macros were enabled. To read an output select one of the group_tab or subhalo_tab files. This will add new particle properties FoFGroupIndex and/or SubGroupIndex. These indicate which group and subgroup each particle belongs to, with zero indicating that the particle is in no group. The groups are numbered in the order they appear in the halo finder output.

The program can read HDF5 output from the VELOCIraptor halo finder (https://github.com/pelahi/VELOCIraptor-STF). This adds the following particle properties:

• VR_ID_bound: which VELOCIraptor halo the particle belongs to. This corresponds to the ID dataset in the .catalog_groups files.
• VR_hostHaloID_bound: which VELOCIraptor 'field' halo the particle belongs to. This corresponds to the hostHaloID dataset in the .catalog_groups files.

Currently only the bound group membership files are read and the hostHaloID is set equal to ID for particles which only belong to a field halo.

Its possible to read in extra particle properties from ascii or HDF5 files using the "Read additional data" option in the file menu. These files must follow the same naming convention as Gadget snapshots. Each data array can be split across any number of files as long as there is one element for each particle in the snapshot and the values are stored in the same order as in the snapshot.

Once an extra property has been read the program will look for a corresponding set of files whenever a new snapshot is loaded. This is done by replacing any instances of the snapshot number in the filename(s).