Get Admin fast on any windows pc

dan-admin is a powerful utility designed to bypass Windows authentication and establish a secondary account with administrative privileges. This tool is intended for responsible and ethical use.

Before you begin, ensure you have the following:

• A USB stick
• Rufus (or use dd)

Follow these steps to set up dan-admin:

1. run build.sh to download and build the custom alpine iso
2. Launch Rufus.
3. In Rufus, select your USB stick as the device.
4. Click "SELECT" and navigate to the built custom-boot.iso.
5. Click "START".
6. Choose "Write in ISO image mode" and click "OK".

To use dan-admin, follow these steps:

1. Connect the USB to the target Windows machine.
2. Restart the machine and repeatedly press the boot manager key (usually F12).
3. Boot from the Alpine USB and wait for it to load.
4. When prompted for login, enter "root".
5. Execute the following commands:

   cd /media/usb
   chmod +x *.sh
   ./admin.sh

6. Follow the on-screen instructions and enter the correct partition (usually "/dev/sda3").
7. After seeing the "Done!" message, power off the machine using the "poweroff" command and remove the USB.
8. Boot into Windows as usual.
9. Navigate to the existing user account.
10. Click the accessibility icon to open a terminal with admin rights.
11. Use "ez-add-user.bat" to create a new "Admin" account with the password "1234".

• To delete the user, use "remove-user.bat".
• To revert all changes, use "restore.bat".

dan-admin is intended for educational purposes only. Any misuse can result in criminal charges. The authors are not responsible for any damage caused by the misuse of this tool.