(This issue has the same purpose as the issue in aq1111. Even though the hardware is different, the report will be helpful to you.)

I've decided to start an effort to collect reports of my drivers working and create the compatibility matrix of the drivers. Since DSM7 has been released and many users are updating their drivers to the latest, I figure now is a good time to start.

If you have previously reported it, it would be appreciated if you could write it anew again. We would especially like to know how stable it runs in the latest environment.

IMPORTANT: Before you post a report Unstable/Not working, I would recommend that you create a separate new issue that describes your problem and link to that. I will only reply to the separate issue because comments for troubleshooting this issue would be noise.

Template

• Model(platform): e.g. DS918+ (apollolake)
• DSM version: e.g. 7.0-41890
• Driver version: e.g. 2.15.0-3
• Ethernet device: e.g. ASUSTOR AS-U2.5G
  • Chip revision: e.g. 12
    • (Optional. You can find the revision in the output of dmesg like r8152 2-1:1.0 eth2: chip rev 12)
• Working status: e.g. Stable
  • (If you have done any special testing, please write the details here.)
• Maximum Throughput: e.g. 2.29 Gbps @ MTU 9000 in iperf3

Working status

To determine the working status, please use the following example as a basis.

• Not work
  • Failed to install the driver or the device is not recognized correctly
• Work
  • The devices seem to work correctly
  • No major issue with large file transfer(at least 5min)
• Stable
  • No major issue over 2 weeks
  • No major issue with large file transfer(at least 30min, speed degradation due to thermal throttling may occur)
• Unstable
  • Disconnection or other major issues are observed under long-term use or high load condition

It will help other users if you write detailed information such as what kind of tests you did and what results were observed, and how long the product has been in use.