[WIP] QMK Guide

adereth · Jun 8, 2017 · 0c33683 · 0c33683
1 parent 87e73b2
commit 0c33683
Show file tree

Hide file tree

Showing 10 changed files with 253 additions and 0 deletions.
diff --git a/qmk-guide/README.md b/qmk-guide/README.md
@@ -0,0 +1,245 @@
+# The EZ Way to QMK
+
+Do you love your Kinesis Advantage, but also love your Ergodox-EZ? Now you can
+have the best of both worlds with your very own QMK running Dactyl! Feels like a
+Kinesis, works like an Ergodox-EZ.
+
+I found this [Massdrop guide](massdrop-ergodox-build-guide.pdf) that shipped with their original
+Ergodox to be very helpful.
+
+## Shopping List
+
+### Things you'll have to find yourself:
+
+* Case
+* 70x Cherry MX compatible Switches
+* 6x Cherry ML switches (optional)
+
+
+### Things you can order from Digikey
+
+#### An aside on LEDs
+
+Before you place this order, you'll need to figure out what color you want your
+LEDs to be, or if you even want LEDs at all.
+
+I had a terrible time figuring out how to figure out which resistor to use with
+each LED. All I can attest to is that
+[These Orange LEDs](http://www.maxkeyboard.com/max-keyboard-orange-3mm-flangeless-replacement-led-for-backlit-mechanical-keyboard-10-pcs.html)
+work with
+[These 220Ω resistors](http://www.digikey.com/scripts/DkSearch/dksus.dll?Detail&itemSeq=229354283&uq=636318134508631803)
+or at least have yet to fail in my Dactyl.
+
+I was hoping that I could find these LEDs on Digikey for you, but they don't
+have ones with the exact specs and I don't know if that breaks the compatibility
+with the resistors I found.
+
+Here's
+[the evil mad scientist's guide](http://www.evilmadscientist.com/2012/resistors-for-leds/)
+to choosing resistors for LEDs, but every time I did the math, it didn't work
+out.
+
+Seriously, find someone who knows more about this if you're making decisions
+here. You're probably already more qualified than me, so open a PR and fix this
+session.
+
+* 70x [1N4148 Diodes](http://www.digikey.com/scripts/DkSearch/dksus.dll?Detail&itemSeq=229354375&uq=636318149504319926)
+* 2x [2.2kΩ Pull up Resistors](https://www.digikey.com/product-detail/en/CFR-25JB-52-2K2/2.2KQBK-ND/666)
+* 2x [TRRS Jacks](http://www.digikey.com/scripts/DkSearch/dksus.dll?Detail&itemSeq=229354247&uq=636318148338283334)
+* 1 [Teensy 2.0](https://www.digikey.com/product-detail/en/adafruit-industries-llc/199/1528-1993-ND/6827126)
+* 1 [MCP23018 I/O Expander](https://www.digikey.com/product-detail/en/microchip-technology/MCP23018-E-SP/MCP23018-E-SP-ND/1999505)
+* [28 Pin IC Socket](http://www.digikey.com/scripts/DkSearch/dksus.dll?Detail&itemSeq=229356912&uq=636318143621851738)
+
+If you want everything in this list from [Digikey](https://www.digikey.com), you
+can upload [this cart](digikey-shopping-cart.csv).
+
+### Things From Amazon
+
+* 1x [MiniUSB Extender Cable](https://www.amazon.com/gp/product/B00B5HSA3Q)
+* Solder/Electrical Tape/Twosided tape
+* [30AWG wrapping wire](https://www.amazon.com/gp/product/B00GWFECWO)
+* TRRS Cable [this one](https://www.amazon.com/Coiled-3-5mm-Jack-Audio-Cable/dp/B019TRW4HQ)
+  worked for me, but it's a matter of taste and how much distance you need.
+
+## Wiring up the Matrix
+
+The firmware you choose will determine the wiring of the keyboard. Since the
+Ergodox-EZ isn't going anywhere **AND** has first class support in QMK by its
+creator, it makes pretty good sense to wire it up the same way.
+
+Here's what the matrix code for the Ergodox-EZ in QMK looks like:
+
+```c
+// matrix positions
+{   // MCP23018
+ { k00, k10, k20,   k30, k40,   KC_NO },                     \
+ { k01, k11, k21,   k31, k41,   k51   },                     \
+ { k02, k12, k22,   k32, k42,   k52   },                     \
+ { k03, k13, k23,   k33, k43,   k53   },                     \
+ { k04, k14, k24,   k34, k44,   k54   },                     \
+ { k05, k15, k25,   k35, KC_NO, k55   },                     \
+ { k06, k16, KC_NO, k36, KC_NO, k56   },                     \
+    // Teensy
+ { k07, k17, KC_NO, k37, KC_NO, k57   },                     \
+ { k08, k18, k28,   k38, KC_NO, k58   },                     \
+ { k09, k19, k29,   k39, k49,   k59   },                     \
+ { k0A, k1A, k2A,   k3A, k4A,   k5A   },                     \
+ { k0B, k1B, k2B,   k3B, k4B,   k5B   },                     \
+ { k0C, k1C, k2C,   k3C, k4C,   k5C   },                     \
+ { k0D, k1D, k2D,   k3D, k4D,   KC_NO }                      \
+}
+```
+
+This is a software mapping of 14 rows, even though the physical layout will wind
+up with 14 columns. Physically, it looks like this:
+
+![](dactyl-keymapping.png)
+
+Look at those colors, they'll be consistent throughout this documentation,
+including the physical wire we wire it up with.
+
+### Rows
+
+You don't have to decide how to connect the rows to the Teensy or MCP yet. Just
+worry about getting the matrix right.
+
+Wiring rows 0-4 is easy. With the 30AWG wire, I had to cut individual wire
+segments from switch to switch. The thumb clusters are Row 5 on each side, so
+the same approach will work, it just doesn't look like a row.
+
+Row 5 is the thumb cluster, so just wire them together and imagine they're in a
+row instead of it being more like a circle.
+
+The rows are just wire. Individual segments connecting two switches. I used a
+pair of pointy tweezers to put little hooks on the end of each segment. The idea
+is to let the Solder do most of the work. If a day ever comes where you have to
+desolder one of these, you'll be glad you didn't aggressively wrap it.
+
+### Columns
+
+The columns need to be wired with diodes. You can probably wire the entire
+column with the diode stems, but I chose to add some wire segments so it would
+look clearer for this guide.
+
+![](dactyl-left-wiring.jpg)
+
+The diodes need the black bar facing away from the key. The other guides
+disagree, but they don't use QMK.
+
+To use wire segments here, I soldered the end of the diode with the black bar to
+the wire first, then placed the other stem on the switch, positioned the diode
+where I wanted it and then bet the diode stem into a hook around the switch
+terminal.
+
+I also made a habit of keeping the trimmed diode stems to use as bridges if
+needed later.
+
+**Note:** Column 6 only has one key at this point.
+
+### Ergodox Compatibility Inner Columns
+
+**This is an optional step, and can be done as a mod after you're done** so
+there's no pressure to make this decision now.
+
+Ergodoxes have an additional three keys in columns 6 & 7. Do you want them on
+your Dactyl?
+
+I own an Ergodox-EZ as well, and want to use the same keymap for both. So I
+added the extra switches below the thumb clusters as Cherry ML switches. If you
+don't care about a consistent experience between a Dactyl and Ergodox, or even
+if you do, it's a matter of personal preference.
+
+Wherever you put them, they're wired into rows 0,1 and 3. Either way, you need
+to wire columns 6 and 7 to the top inner most key in the thumb cluster, so
+columns 6 & 7 are going to be live.
+
+If you go with MLs, you can put them wherever you want, but be careful measuring
+where the holes go, you only get one shot.
+
+**TODO:** CherryML switch hole specs.
+
+## The Matrix Has You
+
+Actually, you have it! Congratulations on having gotten this far.
+
+## Wiring The Right Half
+
+### Wiring the Teensy
+
+We have to start off with the obligatory wiring diagram
+
+![](dactyl-circuit-diagram.png)
+
+Notice the row numbers are different from the other guides to match the QMK
+key codes we're using.
+
+I started off by breadboarding this whole project, but I also burnt out the
+teensy's bootloader.
+[My misadventures wiring a Dactyl](http://joedevivo.com/2017/05/20/building-a-qmk-dactyl.html)
+are a fun read if you feel like this is too hard. I've been there.
+
+Here's the pinout mappings for the rows and columns:
+
+| Row     | Wire Color | Teensy Pin |
+|---------|------------|------------|
+| 0       | Yellow     | PF0        |
+| 1       | Orange     | PF1        |
+| 2       | Green      | PF4        |
+| 3       | Brown      | PF5        |
+| 4       | Blue       | PF6        |
+| 5       | Purple     | PF7        |
+
+
+| Column | Wire Color | Teensy Pin |
+|--------|------------|------------|
+| 7      | Red        | PB0        |
+| 8      | Yellow     | PB1        |
+| 9      | Orange     | PB2        |
+| A      | Green      | PB3        |
+| B      | Brown      | PD2        |
+| C      | Blue       | PD3        |
+| D      | Purple     | PC6        |
+
+Wiring the teensy involves looping the 30AWG wire through the Teensy's pinouts,
+I went through twice, and then dabbed a little solder. If you are ok with
+possibly wasting a little wire, you can use longer wire to solder up the Teensy
+and then breadboard with those wires. There's no room for pins in the case, so
+this is the best way to test it out.
+
+Here's my breadboarded version, almost done. (missing the reset wire to the MCP
+in this photo)
+
+![](dactyl-breadboard.jpg)
+
+Yours will look similar, but with the Teensy coming from off board with a bunch
+of wires. You don't have to breadboard the columns and rows for the teensy, you
+can test them by clipping them to the right spot on the matrix you built.
+
+Columns and rows run by the MCP (Greetings, program!) will be accessible via the
+breadboard.
+
+Here's what that looks like wired in.
+
+![](dactyl-right-wiring.jpg)
+
+Fortunately, QMK *will* let you just run the right half, so you can check in at
+this point and see how that all works,
+
+### The TRRS Jack
+
+In an effort to move some of the bulk away from the Teensy, I put the pull up
+resistors as close to the jack as I could.
+
+![](dactyl-pull-up-resistors.jpg)
+
+I wired the two 2.2k resistors to the bottom two terminals on the TRRS jack,
+then wired the SCL(PD0) and SDA(PD1) to the resistor leg going into the jack.
+Then soldered the outside legs together and ran a wire from Vcc to those outside
+legs, and from them to a third terminal on the TRRS jack. Now all you need is to
+run GND to the fourth terminal.
+
+![](trrs-diagram.jpg)
+
+## Wiring The Left Half
+
+### Wiring the I/O Expander
diff --git a/qmk-guide/dactyl-breadboard.jpg b/qmk-guide/dactyl-breadboard.jpg
diff --git a/qmk-guide/dactyl-circuit-diagram.png b/qmk-guide/dactyl-circuit-diagram.png
diff --git a/qmk-guide/dactyl-keymapping.png b/qmk-guide/dactyl-keymapping.png
diff --git a/qmk-guide/dactyl-left-wiring.jpg b/qmk-guide/dactyl-left-wiring.jpg
diff --git a/qmk-guide/dactyl-pull-up-resistors.jpg b/qmk-guide/dactyl-pull-up-resistors.jpg
diff --git a/qmk-guide/dactyl-right-wiring.jpg b/qmk-guide/dactyl-right-wiring.jpg
diff --git a/qmk-guide/digikey-shopping-cart.csv b/qmk-guide/digikey-shopping-cart.csv
@@ -0,0 +1,8 @@
+Index,Quantity,Part Number,Description,Customer Reference,Available Quantity,Backorder Quantity,Unit Price USD,Extended Price USD,
+1,2,CP-43514-ND,CONN JACK 4COND 3.5MM R/A,,2,0,1.06000,2.12,
+2,2,2.2KQBK-ND,RES 2.2K OHM 1/4W 5% AXIAL,,2,0,0.10000,0.20,
+3,3,220QBK-ND,RES 220 OHM 1/4W 5% AXIAL,,3,0,0.10000,0.30,
+4,1,1528-1993-ND,TEENSY (ATMEGA32U4 USB DEV BOARD,,1,0,19.94000,19.94,
+5,100,1N4148FS-ND,DIODE GEN PURP 100V 200MA DO35,,100,0,0.03080,3.08,
+6,10,ED3050-5-ND,CONN IC DIP SOCKET 28POS TIN,,10,0,0.31500,3.15,
+7,1,MCP23018-E/SP-ND,IC I/O EXPANDER I2C 16B 28SDIP,,1,0,1.56000,1.56,
diff --git a/qmk-guide/massdrop-ergodox-build-guide.pdf b/qmk-guide/massdrop-ergodox-build-guide.pdf
diff --git a/qmk-guide/trrs-diagram.jpg b/qmk-guide/trrs-diagram.jpg