mailto(rsync-bugs@samba.org)

manpage(rsync)(1)(26 Jan 2003)()()

manpagename(rsync)(faster, flexible replacement for rcp)

manpagesynopsis()

rsync [OPTION]... SRC [SRC]... [USER@]HOST:DEST

rsync [OPTION]... [USER@]HOST:SRC DEST

rsync [OPTION]... SRC [SRC]... DEST

rsync [OPTION]... [USER@]HOST::SRC [DEST]

rsync [OPTION]... SRC [SRC]... [USER@]HOST::DEST

rsync [OPTION]... rsync://[USER@]HOST[:PORT]/SRC [DEST]

rsync [OPTION]... SRC [SRC]... rsync://[USER@]HOST[:PORT]/DEST

manpagedescription()

rsync is a program that behaves in much the same way that rcp does,

but has many more options and uses the rsync remote-update protocol to

greatly speed up file transfers when the destination file already

exists.

The rsync remote-update protocol allows rsync to transfer just the

differences between two sets of files across the network connection, using

an efficient checksum-search algorithm described in the technical

report that accompanies this package.

Some of the additional features of rsync are:

itemize(

it() support for copying links, devices, owners, groups and permissions

it() exclude and exclude-from options similar to GNU tar

it() a CVS exclude mode for ignoring the same files that CVS would ignore

it() can use any transparent remote shell, including rsh or ssh

it() does not require root privileges

it() pipelining of file transfers to minimize latency costs

it() support for anonymous or authenticated rsync servers (ideal for

mirroring)

)

manpagesection(GENERAL)

There are eight different ways of using rsync. They are:

itemize(

it() for copying local files. This is invoked when neither

source nor destination path contains a : separator

it() for copying from the local machine to a remote machine using

a remote shell program as the transport (such as rsh or

ssh). This is invoked when the destination path contains a

single : separator.

it() for copying from a remote machine to the local machine

using a remote shell program. This is invoked when the source

contains a : separator.

it() for copying from a remote rsync server to the local

machine. This is invoked when the source path contains a ::

separator or a rsync:// URL.

it() for copying from the local machine to a remote rsync

server. This is invoked when the destination path contains a ::

separator or a rsync:// URL.

it() for copying from a remote machine using a remote shell

program as the transport, using rsync server on the remote

machine. This is invoked when the source path contains a ::

separator and the --rsh=COMMAND (aka "-e COMMAND") option is

also provided.

it() for copying from the local machine to a remote machine

using a remote shell program as the transport, using rsync

server on the remote machine. This is invoked when the

destination path contains a :: separator and the

--rsh=COMMMAND option is also provided.

it() for listing files on a remote machine. This is done the

same way as rsync transfers except that you leave off the

local destination.

)

Note that in all cases (other than listing) at least one of the source

and destination paths must be local.

manpagesection(SETUP)

See the file README for installation instructions.

Once installed, you can use rsync to any machine that you can access via

a remote shell (as well as some that you can access using the rsync

daemon-mode protocol). For remote transfers, rsync typically uses rsh

for its communications, but it may have been configured to use a

different remote shell by default, such as ssh.

You can also specify any remote shell you like, either by using the -e

command line option, or by setting the RSYNC_RSH environment variable.

One common substitute is to use ssh, which offers a high degree of

security.

Note that rsync must be installed on both the source and destination

machines.

manpagesection(USAGE)

You use rsync in the same way you use rcp. You must specify a source

and a destination, one of which may be remote.

Perhaps the best way to explain the syntax is some examples:

quote(rsync *.c foo:src/)

this would transfer all files matching the pattern *.c from the

current directory to the directory src on the machine foo. If any of

the files already exist on the remote system then the rsync

remote-update protocol is used to update the file by sending only the

differences. See the tech report for details.

quote(rsync -avz foo:src/bar /data/tmp)

this would recursively transfer all files from the directory src/bar on the

machine foo into the /data/tmp/bar directory on the local machine. The

files are transferred in "archive" mode, which ensures that symbolic

links, devices, attributes, permissions, ownerships etc are preserved

in the transfer. Additionally, compression will be used to reduce the

size of data portions of the transfer.

quote(rsync -avz foo:src/bar/ /data/tmp)

a trailing slash on the source changes this behavior to transfer

all files from the directory src/bar on the machine foo into the

/data/tmp/. A trailing / on a source name means "copy the

contents of this directory". Without a trailing slash it means "copy

the directory". This difference becomes particularly important when

using the --delete option.

You can also use rsync in local-only mode, where both the source and

destination don't have a ':' in the name. In this case it behaves like

an improved copy command.

quote(rsync somehost.mydomain.com::)

this would list all the anonymous rsync modules available on the host

somehost.mydomain.com. (See the following section for more details.)

manpagesection(CONNECTING TO AN RSYNC SERVER)

It is also possible to use rsync without a remote shell as the

transport. In this case you will connect to a remote rsync server

running on TCP port 873.

You may establish the connection via a web proxy by setting the

environment variable RSYNC_PROXY to a hostname:port pair pointing to

your web proxy. Note that your web proxy's configuration must allow

proxying to port 873.

Using rsync in this way is the same as using it with a remote shell except

that:

itemize(

it() you use a double colon :: instead of a single colon to

separate the hostname from the path or a rsync:// URL.

it() the remote server may print a message of the day when you

connect.

it() if you specify no path name on the remote server then the

list of accessible paths on the server will be shown.

it() if you specify no local destination then a listing of the

specified files on the remote server is provided.

)

Some paths on the remote server may require authentication. If so then

you will receive a password prompt when you connect. You can avoid the

password prompt by setting the environment variable RSYNC_PASSWORD to

the password you want to use or using the --password-file option. This

may be useful when scripting rsync.

WARNING: On some systems environment variables are visible to all

users. On those systems using --password-file is recommended.

manpagesection(CONNECTING TO AN RSYNC SERVER OVER A REMOTE SHELL PROGRAM)

It is sometimes useful to be able to set up file transfers using rsync

server capabilities on the remote machine, while still using rsh or

ssh for transport. This is especially useful when you want to connect

to a remote machine via ssh (for encryption or to get through a

firewall), but you still want to have access to the rsync server

features (see RUNNING AN RSYNC SERVER OVER A REMOTE SHELL PROGRAM,

below).

From the user's perspective, using rsync in this way is the same as

using it to connect to an rsync server, except that you must

explicitly set the remote shell program on the command line with

--rsh=COMMAND. (Setting RSYNC_RSH in the environment will not turn on

this functionality.)

In order to distinguish between the remote-shell user and the rsync

server user, you can use '-l user' on your remote-shell command:

quote(rsync -av --rsh="ssh -l ssh-user" rsync-user@host::module[/path] local-path)

The "ssh-user" will be used at the ssh level; the "rsync-user" will be

used to check against the rsyncd.conf on the remote host.

manpagesection(RUNNING AN RSYNC SERVER)

An rsync server is configured using a config file. Please see the

rsyncd.conf(5) man page for more information. By default the configuration

file is called /etc/rsyncd.conf, unless rsync is running over a remote

shell program and is not running as root; in that case, the default name

is rsyncd.conf in the current directory on the remote computer

(typically $HOME).

manpagesection(RUNNING AN RSYNC SERVER OVER A REMOTE SHELL PROGRAM)

See the rsyncd.conf(5) man page for full information on the rsync

server configuration file.

Several configuration options will not be available unless the remote

user is root (e.g. chroot, setuid/setgid, etc.). There is no need to

configure inetd or the services map to include the rsync server port

if you run an rsync server only via a remote shell program.

To run an rsync server out of a single-use ssh key, use the

"command=em(COMMAND)" syntax in the remote user's

authorized_keys entry, where command would be

quote(rsync --server --daemon .)

NOTE: rsync's argument parsing expects the trailing ".", so make sure

that it's there. If you want to use a rsyncd.conf(5)-style

configuration file other than the default, you can added a

--config option to the em(command):

quote(rsync --server --daemon --config=em(file) .)

manpagesection(EXAMPLES)

Here are some examples of how I use rsync.

To backup my wife's home directory, which consists of large MS Word

files and mail folders, I use a cron job that runs

quote(rsync -Cavz . arvidsjaur:backup)

each night over a PPP connection to a duplicate directory on my machine

"arvidsjaur".

To synchronize my samba source trees I use the following Makefile

targets:

quote( get:nl()

rsync -avuzb --exclude '*~' samba:samba/ .

put:nl()

rsync -Cavuzb . samba:samba/

sync: get put)

this allows me to sync with a CVS directory at the other end of the

connection. I then do cvs operations on the remote machine, which saves a

lot of time as the remote cvs protocol isn't very efficient.

I mirror a directory between my "old" and "new" ftp sites with the

command

quote(rsync -az -e ssh --delete ~ftp/pub/samba/ nimbus:"~ftp/pub/tridge/samba")

this is launched from cron every few hours.

manpagesection(OPTIONS SUMMARY)

Here is a short summary of the options available in rsync. Please refer

to the detailed description below for a complete description.

verb(

-v, --verbose increase verbosity

-q, --quiet decrease verbosity

-c, --checksum always checksum

-a, --archive archive mode, equivalent to -rlptgoD

-r, --recursive recurse into directories

-R, --relative use relative path names

--no-relative turn off --relative

--no-implied-dirs don't send implied dirs with -R

-b, --backup make backups (default ~ suffix)

--backup-dir make backups into this directory

--suffix=SUFFIX define backup suffix

-u, --update update only (don't overwrite newer files)

-l, --links copy symlinks as symlinks

-L, --copy-links copy the referent of symlinks

--copy-unsafe-links copy links outside the source tree

--safe-links ignore links outside the destination tree

-H, --hard-links preserve hard links

-p, --perms preserve permissions

-o, --owner preserve owner (root only)

-g, --group preserve group

-D, --devices preserve devices (root only)

-t, --times preserve times

-S, --sparse handle sparse files efficiently

-n, --dry-run show what would have been transferred

-W, --whole-file copy whole files, no incremental checks

--no-whole-file turn off --whole-file

-x, --one-file-system don't cross filesystem boundaries

-B, --block-size=SIZE checksum blocking size (default 700)

-e, --rsh=COMMAND specify the remote shell to use

--rsync-path=PATH specify path to rsync on the remote machine

--existing only update files that already exist

--ignore-existing ignore files that already exist on the receiving side

--delete delete files that don't exist on the sending side

--delete-excluded also delete excluded files on the receiving side

--delete-after delete after transferring, not before

--ignore-errors delete even if there are IO errors

--max-delete=NUM don't delete more than NUM files

--partial keep partially transferred files

--force force deletion of directories even if not empty

--numeric-ids don't map uid/gid values by user/group name

--timeout=TIME set IO timeout in seconds

-I, --ignore-times don't exclude files that match length and time

--size-only only use file size when determining if a file should be transferred

--modify-window=NUM Timestamp window (seconds) for file match (default=0)

-T --temp-dir=DIR create temporary files in directory DIR

--compare-dest=DIR also compare destination files relative to DIR

--link-dest=DIR create hardlinks to DIR for unchanged files

-P equivalent to --partial --progress

-z, --compress compress file data

-C, --cvs-exclude auto ignore files in the same way CVS does

--exclude=PATTERN exclude files matching PATTERN

--exclude-from=FILE exclude patterns listed in FILE

--include=PATTERN don't exclude files matching PATTERN

--include-from=FILE don't exclude patterns listed in FILE

--files-from=FILE read FILE for list of source-file names

-0 --from0 file names we read are separated by nulls, not newlines

--version print version number

--daemon run as a rsync daemon

--no-detach do not detach from the parent

--address=ADDRESS bind to the specified address

--config=FILE specify alternate rsyncd.conf file

--port=PORT specify alternate rsyncd port number

--blocking-io use blocking IO for the remote shell

--no-blocking-io turn off --blocking-io

--stats give some file transfer stats

--progress show progress during transfer

--log-format=FORMAT log file transfers using specified format

--password-file=FILE get password from FILE

--bwlimit=KBPS limit I/O bandwidth, KBytes per second

--read-batch=PREFIX read batch fileset starting with PREFIX

--write-batch=PREFIX write batch fileset starting with PREFIX

-h, --help show this help screen

)

manpageoptions()

rsync uses the GNU long options package. Many of the command line

options have two variants, one short and one long. These are shown

below, separated by commas. Some options only have a long variant.

The '=' for options that take a parameter is optional; whitespace

can be used instead.

startdit()

dit(bf(-h, --help)) Print a short help page describing the options

available in rsync

dit(bf(--version)) print the rsync version number and exit

dit(bf(-v, --verbose)) This option increases the amount of information you

are given during the transfer. By default, rsync works silently. A

single -v will give you information about what files are being

transferred and a brief summary at the end. Two -v flags will give you

information on what files are being skipped and slightly more

information at the end. More than two -v flags should only be used if

you are debugging rsync.

dit(bf(-q, --quiet)) This option decreases the amount of information you

are given during the transfer, notably suppressing information messages

from the remote server. This flag is useful when invoking rsync from

cron.

dit(bf(-I, --ignore-times)) Normally rsync will skip any files that are

already the same length and have the same time-stamp. This option turns

off this behavior.

dit(bf(--size-only)) Normally rsync will skip any files that are

already the same length and have the same time-stamp. With the

--size-only option files will be skipped if they have the same size,

regardless of timestamp. This is useful when starting to use rsync

after using another mirroring system which may not preserve timestamps

exactly.

dit(bf(--modify-window)) When comparing two timestamps rsync treats

the timestamps as being equal if they are within the value of

modify_window. This is normally zero, but you may find it useful to

set this to a larger value in some situations. In particular, when

transferring to Windows FAT filesystems which cannot represent times

with a 1 second resolution --modify-window=1 is useful.

dit(bf(-c, --checksum)) This forces the sender to checksum all files using

a 128-bit MD4 checksum before transfer. The checksum is then

explicitly checked on the receiver and any files of the same name

which already exist and have the same checksum and size on the

receiver are skipped. This option can be quite slow.

dit(bf(-a, --archive)) This is equivalent to -rlptgoD. It is a quick

way of saying you want recursion and want to preserve almost

everything.

Note however that bf(-a) bf(does not preserve hardlinks), because

finding multiply-linked files is expensive. You must separately

specify bf(-H).

dit(bf(-r, --recursive)) This tells rsync to copy directories

recursively. If you don't specify this then rsync won't copy

directories at all.

dit(bf(-R, --relative)) Use relative paths. This means that the full path

names specified on the command line are sent to the server rather than

just the last parts of the filenames. This is particularly useful when

you want to send several different directories at the same time. For

example, if you used the command

verb(rsync foo/bar/foo.c remote:/tmp/)

then this would create a file called foo.c in /tmp/ on the remote

machine. If instead you used

verb(rsync -R foo/bar/foo.c remote:/tmp/)

then a file called /tmp/foo/bar/foo.c would be created on the remote

machine -- the full path name is preserved.

dit(bf(--no-relative)) Turn off the --relative option. This is only

needed if you want to use --files-from without its implied --relative

file processing.

dit(bf(--no-implied-dirs)) When combined with the --relative option, the

implied directories in each path are not explicitly duplicated as part

of the transfer. This makes the transfer more optimal and also allows

the two sides to have non-matching symlinks in the implied part of the

path. For instance, if you transfer the file "/path/foo/file" with -R,

the default is for rsync to ensure that "/path" and "/path/foo" on the

destination exactly match the directories/symlinks of the source. Using

the --no-implied-dirs option would omit both of these implied dirs,

which means that if "/path" was a real directory on one machine and a

symlink of the other machine, rsync would not try to change this.

dit(bf(-b, --backup)) With this option preexisting destination files are

renamed with a ~ extension as each file is transferred. You can

control the backup suffix using the --suffix option.

dit(bf(--backup-dir=DIR)) In combination with the --backup option, this

tells rsync to store all backups in the specified directory. This is

very useful for incremental backups. You can additionally

specify a backup suffix using the --suffix option

(otherwise the files backed up in the specified directory

will keep their original filenames).

dit(bf(--suffix=SUFFIX)) This option allows you to override the default

backup suffix used with the -b option. The default is a ~.

If --backup-dir and --suffix are both specified,

the SUFFIX is appended to the filename even in the backup directory.

dit(bf(-u, --update)) This forces rsync to skip any files for which the

destination file already exists and has a date later than the source

file.

dit(bf(-l, --links)) When symlinks are encountered, recreate the

symlink on the destination.

dit(bf(-L, --copy-links)) When symlinks are encountered, the file that

they point to is copied, rather than the symlink.

dit(bf(--copy-unsafe-links)) This tells rsync to copy the referent of

symbolic links that point outside the source tree. Absolute symlinks

are also treated like ordinary files, and so are any symlinks in the

source path itself when --relative is used.

dit(bf(--safe-links)) This tells rsync to ignore any symbolic links

which point outside the destination tree. All absolute symlinks are

also ignored. Using this option in conjunction with --relative may

give unexpected results.

dit(bf(-H, --hard-links)) This tells rsync to recreate hard links on

the remote system to be the same as the local system. Without this

option hard links are treated like regular files.

Note that rsync can only detect hard links if both parts of the link

are in the list of files being sent.

This option can be quite slow, so only use it if you need it.

dit(bf(-W, --whole-file)) With this option the incremental rsync algorithm

is not used and the whole file is sent as-is instead. The transfer may be

faster if this option is used when the bandwidth between the source and

target machines is higher than the bandwidth to disk (especially when the

"disk" is actually a networked file system). This is the default when both

the source and target are on the local machine.

dit(bf(--no-whole-file)) Turn off --whole-file, for use when it is the

default.

dit(bf(-p, --perms)) This option causes rsync to update the remote

permissions to be the same as the local permissions.

dit(bf(-o, --owner)) This option causes rsync to set the owner of the

destination file to be the same as the source file. On most systems,

only the super-user can set file ownership. Note that if the remote system

is a daemon using chroot, the --numeric-ids option is implied because the

remote system cannot get access to the usernames from /etc/passwd.

dit(bf(-g, --group)) This option causes rsync to set the group of the

destination file to be the same as the source file. If the receiving

program is not running as the super-user, only groups that the

receiver is a member of will be preserved (by group name, not group id

number).

dit(bf(-D, --devices)) This option causes rsync to transfer character and

block device information to the remote system to recreate these

devices. This option is only available to the super-user.

dit(bf(-t, --times)) This tells rsync to transfer modification times along

with the files and update them on the remote system. Note that if this

option is not used, the optimization that excludes files that have not been

modified cannot be effective; in other words, a missing -t or -a will

cause the next transfer to behave as if it used -I, and all files will have

their checksums compared and show up in log messages even if they haven't

changed.

dit(bf(-n, --dry-run)) This tells rsync to not do any file transfers,

instead it will just report the actions it would have taken.

dit(bf(-S, --sparse)) Try to handle sparse files efficiently so they take

up less space on the destination.

NOTE: Don't use this option when the destination is a Solaris "tmpfs"

filesystem. It doesn't seem to handle seeks over null regions

correctly and ends up corrupting the files.

dit(bf(-x, --one-file-system)) This tells rsync not to cross filesystem

boundaries when recursing. This is useful for transferring the

contents of only one filesystem.

dit(bf(--existing)) This tells rsync not to create any new files -

only update files that already exist on the destination.

dit(bf(--ignore-existing))

This tells rsync not to update files that already exist on

the destination.

dit(bf(--max-delete=NUM)) This tells rsync not to delete more than NUM

files or directories. This is useful when mirroring very large trees

to prevent disasters.

dit(bf(--delete)) This tells rsync to delete any files on the receiving

side that aren't on the sending side. Files that are excluded from

transfer are excluded from being deleted unless you use --delete-excluded.

This option has no effect if directory recursion is not selected.

This option can be dangerous if used incorrectly! It is a very good idea

to run first using the dry run option (-n) to see what files would be

deleted to make sure important files aren't listed.

If the sending side detects any IO errors then the deletion of any

files at the destination will be automatically disabled. This is to

prevent temporary filesystem failures (such as NFS errors) on the

sending side causing a massive deletion of files on the

destination. You can override this with the --ignore-errors option.

dit(bf(--delete-excluded)) In addition to deleting the files on the

receiving side that are not on the sending side, this tells rsync to also

delete any files on the receiving side that are excluded (see --exclude).

Implies --delete.

dit(bf(--delete-after)) By default rsync does file deletions before

transferring files to try to ensure that there is sufficient space on

the receiving filesystem. If you want to delete after transferring

then use the --delete-after switch. Implies --delete.

dit(bf(--ignore-errors)) Tells --delete to go ahead and delete files

even when there are IO errors.

dit(bf(--force)) This options tells rsync to delete directories even if

they are not empty when they are to be replaced by non-directories. This

is only relevant without --delete because deletions are now done depth-first.

Requires the --recursive option (which is implied by -a) to have any effect.

dit(bf(-B , --block-size=BLOCKSIZE)) This controls the block size used in

the rsync algorithm. See the technical report for details.

dit(bf(-e, --rsh=COMMAND)) This option allows you to choose an alternative

remote shell program to use for communication between the local and

remote copies of rsync. Typically, rsync is configured to use rsh by

default, but you may prefer to use ssh because of its high security.

If this option is used with bf([user@]host::module/path), then the

remote shell em(COMMMAND) will be used to run an rsync server on the

remote host, and all data will be transmitted through that remote

shell connection, rather than through a direct socket connection to a

running rsync server on the remote host. See the section "CONNECTING

TO AN RSYNC SERVER OVER A REMOTE SHELL PROGRAM" above.

Command-line arguments are permitted in COMMAND provided that COMMAND is

presented to rsync as a single argument. For example:

quote(-e "ssh -p 2234")

(Note that ssh users can alternately customize site-specific connect

options in their .ssh/config file.)

You can also choose the remote shell program using the RSYNC_RSH

environment variable, which accepts the same range of values as -e.

See also the --blocking-io option which is affected by this option.

dit(bf(--rsync-path=PATH)) Use this to specify the path to the copy of

rsync on the remote machine. Useful when it's not in your path. Note

that this is the full path to the binary, not just the directory that

the binary is in.

dit(bf(-C, --cvs-exclude)) This is a useful shorthand for excluding a

broad range of files that you often don't want to transfer between

systems. It uses the same algorithm that CVS uses to determine if

a file should be ignored.

The exclude list is initialized to:

quote(RCS/ SCCS/ CVS/ .svn/ CVS.adm RCSLOG cvslog.* tags TAGS .make.state

.nse_depinfo *~ #* .#* ,* *.old *.bak *.BAK *.orig *.rej .del-*

*.a *.o *.obj *.so *.Z *.elc *.ln core)

then files listed in a $HOME/.cvsignore are added to the list and any

files listed in the CVSIGNORE environment variable (space delimited).

Finally, any file is ignored if it is in the same directory as a

.cvsignore file and matches one of the patterns listed therein. See

the bf(cvs(1)) manual for more information.

dit(bf(--exclude=PATTERN)) This option allows you to selectively exclude

certain files from the list of files to be transferred. This is most

useful in combination with a recursive transfer.

You may use as many --exclude options on the command line as you like

to build up the list of files to exclude.

See the section on exclude patterns for information on the syntax of

this option.

dit(bf(--exclude-from=FILE)) This option is similar to the --exclude

option, but instead it adds all exclude patterns listed in the file

FILE to the exclude list. Blank lines in FILE and lines starting with

';' or '#' are ignored.

If em(FILE) is bf(-) the list will be read from standard input.

dit(bf(--include=PATTERN)) This option tells rsync to not exclude the

specified pattern of filenames. This is useful as it allows you to

build up quite complex exclude/include rules.

See the section of exclude patterns for information on the syntax of

this option.

dit(bf(--include-from=FILE)) This specifies a list of include patterns

from a file.

If em(FILE) is bf(-) the list will be read from standard input.

dit(bf(--files-from=FILE)) Using this option allows you to specify the

exact list of files to transfer (as read from the specified FILE or "-"

for stdin). It also tweaks the default behavior of rsync to make

transferring just the specified files and directories easier. For

instance, the --relative option is enabled by default when this option

is used (use --no-relative if you want to turn that off), all

directories specified in the list are created on the destination (rather

than being noisily skipped without -r), and the -a (--archive) option's

behavior does not imply -r (--recursive) -- specify it explicitly, if

you want it.

The file names that are read from the FILE are all relative to the

source dir -- any leading slashes are removed and no ".." references are

allowed to go higher than the source dir. For example, take this

command:

quote(rsync -a --files-from=/tmp/foo /usr remote:/backup)

If /tmp/foo contains the string "bin" (or even "/bin"), the /usr/bin

directory will be created as /backup/bin on the remote host (but the

contents of the /usr/bin dir would not be sent unless you specified -r

or the names were explicitly listed in /tmp/foo). Also keep in mind

that the effect of the (enabled by default) --relative option is to

duplicate only the path info that is read from the file -- it does not

force the duplication of the source-spec path (/usr in this case).

In addition, the --files-from file can be read from the remote host

instead of the local host if you specify a "host:" in front of the file

(the host must match one end of the transfer). As a short-cut, you can

specify just a prefix of ":" to mean "use the remote end of the

transfer". For example:

quote(rsync -a --files-from=:/path/file-list src:/ /tmp/copy)

This would copy all the files specified in the /path/file-list file that

was located on the remote "src" host.

dit(bf(-0, --from0)) This tells rsync that the filenames it reads from a

file are terminated by a null ('\0') character, not a NL, CR, or CR+LF.

This affects --exclude-from, --include-from, and --files-from.

dit(bf(-T, --temp-dir=DIR)) This option instructs rsync to use DIR as a

scratch directory when creating temporary copies of the files

transferred on the receiving side. The default behavior is to create

the temporary files in the receiving directory.

dit(bf(--compare-dest=DIR)) This option instructs rsync to use DIR on

the destination machine as an additional directory to compare destination

files against when doing transfers if the files are missing in the

destination directory. This is useful for doing transfers to a new

destination while leaving existing files intact, and then doing a

flash-cutover when all files have been successfully transferred (for

example by moving directories around and removing the old directory,

although this skips files that haven't changed; see also --link-dest).

This option increases the usefulness of --partial because partially

transferred files will remain in the new temporary destination until they

have a chance to be completed. If DIR is a relative path, it is relative

to the destination directory.

dit(bf(--link-dest=DIR)) This option behaves like bf(--compare-dest) but

also will create hard links from em(DIR) to the destination directory for

unchanged files. Files with changed ownership or permissions will not be

linked.

dit(bf(-z, --compress)) With this option, rsync compresses any data from

the files that it sends to the destination machine. This

option is useful on slow connections. The compression method used is the

same method that gzip uses.

Note this this option typically achieves better compression ratios

that can be achieved by using a compressing remote shell, or a

compressing transport, as it takes advantage of the implicit

information sent for matching data blocks.

dit(bf(--numeric-ids)) With this option rsync will transfer numeric group

and user ids rather than using user and group names and mapping them

at both ends.

By default rsync will use the user name and group name to determine

what ownership to give files. The special uid 0 and the special group

0 are never mapped via user/group names even if the --numeric-ids

option is not specified.

If the source system is a daemon using chroot, or if a user or group

name does not exist on the destination system, then the numeric id

from the source system is used instead.

dit(bf(--timeout=TIMEOUT)) This option allows you to set a maximum IO

timeout in seconds. If no data is transferred for the specified time

then rsync will exit. The default is 0, which means no timeout.

dit(bf(--daemon)) This tells rsync that it is to run as a daemon. The

daemon may be accessed using the bf(host::module) or

bf(rsync://host/module/) syntax.

If standard input is a socket then rsync will assume that it is being

run via inetd, otherwise it will detach from the current terminal and

become a background daemon. The daemon will read the config file

(rsyncd.conf) on each connect made by a client and respond to

requests accordingly. See the rsyncd.conf(5) man page for more

details.

dit(bf(--no-detach)) When running as a daemon, this option instructs

rsync to not detach itself and become a background process. This

option is required when running as a service on Cygwin, and may also

be useful when rsync is supervised by a program such as

bf(daemontools) or AIX's bf(System Resource Controller).

bf(--no-detach) is also recommended when rsync is run under a

debugger. This option has no effect if rsync is run from inetd or

sshd.

dit(bf(--address)) By default rsync will bind to the wildcard address

when run as a daemon with the --daemon option or when connecting to a

rsync server. The --address option allows you to specify a specific IP

address (or hostname) to bind to. This makes virtual hosting possible

in conjunction with the --config option.

dit(bf(--config=FILE)) This specifies an alternate config file than

the default. This is only relevant when --daemon is specified.

The default is /etc/rsyncd.conf unless the daemon is running over

a remote shell program and the remote user is not root; in that case

the default is rsyncd.conf in the current directory (typically $HOME).

dit(bf(--port=PORT)) This specifies an alternate TCP port number to use

rather than the default port 873.

dit(bf(--blocking-io)) This tells rsync to use blocking IO when launching

a remote shell transport. If -e or --rsh are not specified or are set to

the default "rsh", this defaults to blocking IO, otherwise it defaults to

non-blocking IO. You may find the --blocking-io option is needed for some

remote shells that can't handle non-blocking IO. (Note that ssh prefers

non-blocking IO.)

dit(bf(--no-blocking-io)) Turn off --blocking-io, for use when it is the

default.

dit(bf(--log-format=FORMAT)) This allows you to specify exactly what the

rsync client logs to stdout on a per-file basis. The log format is

specified using the same format conventions as the log format option in

rsyncd.conf.

dit(bf(--stats)) This tells rsync to print a verbose set of statistics

on the file transfer, allowing you to tell how effective the rsync

algorithm is for your data.

dit(bf(--partial)) By default, rsync will delete any partially

transferred file if the transfer is interrupted. In some circumstances

it is more desirable to keep partially transferred files. Using the

--partial option tells rsync to keep the partial file which should

make a subsequent transfer of the rest of the file much faster.

dit(bf(--progress)) This option tells rsync to print information

showing the progress of the transfer. This gives a bored user

something to watch.

This option is normally combined with -v. Using this option without

the -v option will produce weird results on your display.

dit(bf(-P)) The -P option is equivalent to --partial --progress. I

found myself typing that combination quite often so I created an

option to make it easier.

dit(bf(--password-file)) This option allows you to provide a password

in a file for accessing a remote rsync server. Note that this option

is only useful when accessing a rsync server using the built in

transport, not when using a remote shell as the transport. The file

must not be world readable. It should contain just the password as a

single line.

dit(bf(--bwlimit=KBPS)) This option allows you to specify a maximum

transfer rate in kilobytes per second. This option is most effective when

using rsync with large files (several megabytes and up). Due to the nature

of rsync transfers, blocks of data are sent, then if rsync determines the

transfer was too fast, it will wait before sending the next data block. The

result is an average transfer rate equalling the specified limit. A value

of zero specifies no limit.

dit(bf(--write-batch=PREFIX)) Generate a set of files that can be

transferred as a batch update. Each filename in the set starts with

PREFIX. See the "BATCH MODE" section for details.

dit(bf(--read-batch=PREFIX)) Apply a previously generated change batch,

using the fileset whose filenames start with PREFIX. See the "BATCH

MODE" section for details.

enddit()

manpagesection(EXCLUDE PATTERNS)

The exclude and include patterns specified to rsync allow for flexible

selection of which files to transfer and which files to skip.

rsync builds an ordered list of include/exclude options as specified on

the command line. When a filename is encountered, rsync checks the

name against each exclude/include pattern in turn. The first matching

pattern is acted on. If it is an exclude pattern, then that file is

skipped. If it is an include pattern then that filename is not

skipped. If no matching include/exclude pattern is found then the

filename is not skipped.

Note that when used with -r (which is implied by -a), every subcomponent of

every path is visited from top down, so include/exclude patterns get

applied recursively to each subcomponent.

Note also that the --include and --exclude options take one pattern

each. To add multiple patterns use the --include-from and

--exclude-from options or multiple --include and --exclude options.

The patterns can take several forms. The rules are:

itemize(

it() if the pattern starts with a / then it is matched against the

start of the filename, otherwise it is matched against the end of

the filename. Thus "/foo" would match a file called "foo" at the base of

the tree. On the other hand, "foo" would match any file called "foo"

anywhere in the tree because the algorithm is applied recursively from

top down; it behaves as if each path component gets a turn at being the

end of the file name.

it() if the pattern ends with a / then it will only match a

directory, not a file, link or device.

it() if the pattern contains a wildcard character from the set

*?[ then expression matching is applied using the shell filename

matching rules. Otherwise a simple string match is used.

it() if the pattern includes a double asterisk "**" then all wildcards in

the pattern will match slashes, otherwise they will stop at slashes.

it() if the pattern contains a / (not counting a trailing /) then it

is matched against the full filename, including any leading

directory. If the pattern doesn't contain a / then it is matched

only against the final component of the filename. Again, remember

that the algorithm is applied recursively so "full filename" can

actually be any portion of a path.

it() if the pattern starts with "+ " (a plus followed by a space)

then it is always considered an include pattern, even if specified as

part of an exclude option. The "+ " part is discarded before matching.

it() if the pattern starts with "- " (a minus followed by a space)

then it is always considered an exclude pattern, even if specified as

part of an include option. The "- " part is discarded before matching.

it() if the pattern is a single exclamation mark ! then the current

include/exclude list is reset, removing all previously defined patterns.

)

The +/- rules are most useful in exclude lists, allowing you to have a

single exclude list that contains both include and exclude options.

If you end an exclude list with --exclude '*', note that since the

algorithm is applied recursively that unless you explicitly include

parent directories of files you want to include then the algorithm

will stop at the parent directories and never see the files below

them. To include all directories, use --include '*/' before the

--exclude '*'.

Here are some exclude/include examples:

itemize(

it() --exclude "*.o" would exclude all filenames matching *.o

it() --exclude "/foo" would exclude a file in the base directory called foo

it() --exclude "foo/" would exclude any directory called foo

it() --exclude "/foo/*/bar" would exclude any file called bar two

levels below a base directory called foo

it() --exclude "/foo/**/bar" would exclude any file called bar two

or more levels below a base directory called foo

it() --include "*/" --include "*.c" --exclude "*" would include all

directories and C source files

it() --include "foo/" --include "foo/bar.c" --exclude "*" would include

only foo/bar.c (the foo/ directory must be explicitly included or

it would be excluded by the "*")

)

manpagesection(BATCH MODE)

bf(Note:) Batch mode should be considered experimental in this version

of rsync. The interface or behaviour may change before it stabilizes.

Batch mode can be used to apply the same set of updates to many

identical systems. Suppose one has a tree which is replicated on a

number of hosts. Now suppose some changes have been made to this

source tree and those changes need to be propagated to the other

hosts. In order to do this using batch mode, rsync is run with the

write-batch option to apply the changes made to the source tree to one

of the destination trees. The write-batch option causes the rsync

client to store the information needed to repeat this operation against

other destination trees in a batch update fileset (see below). The

filename of each file in the fileset starts with a prefix specified by

the user as an argument to the write-batch option. This fileset is

then copied to each remote host, where rsync is run with the read-batch

option, again specifying the same prefix, and the destination tree.

Rsync updates the destination tree using the information stored in the

batch update fileset.

The fileset consists of 4 files:

itemize(

it() bf(<prefix>.rsync_argvs) command-line arguments

it() bf(<prefix>.rsync_flist) rsync internal file metadata

it() bf(<prefix>.rsync_csums) rsync checksums

it() bf(<prefix>.rsync_delta) data blocks for file update & change

)

The .rsync_argvs file contains a command-line suitable for updating a

destination tree using that batch update fileset. It can be executed

using a Bourne(-like) shell, optionally passing in an alternate

destination tree pathname which is then used instead of the original

path. This is useful when the destination tree path differs from the

original destination tree path.

Generating the batch update fileset once saves having to perform the

file status, checksum and data block generation more than once when

updating multiple destination trees. Multicast transport protocols can

be used to transfer the batch update files in parallel to many hosts at

once, instead of sending the same data to every host individually.

Example:

verb(

$ rsync --write_batch=pfx -a /source/dir/ /adest/dir/

$ rcp pfx.rsync_* remote:

$ rsh remote rsync --read_batch=pfx -a /bdest/dir/

# or alternatively

$ rsh remote ./pfx.rsync_argvs /bdest/dir/

)