mailto(rsync-bugs@samba.org)

manpage(rsyncd.conf)(5)(6 Nov 2006)()()

manpagename(rsyncd.conf)(configuration file for rsync in daemon mode)

manpagesynopsis()

rsyncd.conf

manpagedescription()

The rsyncd.conf file is the runtime configuration file for rsync when

run as an rsync daemon.

The rsyncd.conf file controls authentication, access, logging and

available modules.

manpagesection(FILE FORMAT)

The file consists of modules and parameters. A module begins with the

name of the module in square brackets and continues until the next

module begins. Modules contain parameters of the form "name = value".

The file is line-based -- that is, each newline-terminated line represents

either a comment, a module name or a parameter.

Only the first equals sign in a parameter is significant. Whitespace before

or after the first equals sign is discarded. Leading, trailing and internal

whitespace in module and parameter names is irrelevant. Leading and

trailing whitespace in a parameter value is discarded. Internal whitespace

within a parameter value is retained verbatim.

Any line beginning with a hash (#) is ignored, as are lines containing

only whitespace.

Any line ending in a \ is "continued" on the next line in the

customary UNIX fashion.

The values following the equals sign in parameters are all either a string

(no quotes needed) or a boolean, which may be given as yes/no, 0/1 or

true/false. Case is not significant in boolean values, but is preserved

in string values.

manpagesection(LAUNCHING THE RSYNC DAEMON)

The rsync daemon is launched by specifying the bf(--daemon) option to

rsync.

The daemon must run with root privileges if you wish to use chroot, to

bind to a port numbered under 1024 (as is the default 873), or to set

file ownership. Otherwise, it must just have permission to read and

write the appropriate data, log, and lock files.

You can launch it either via inetd, as a stand-alone daemon, or from

an rsync client via a remote shell. If run as a stand-alone daemon then

just run the command "bf(rsync --daemon)" from a suitable startup script.

When run via inetd you should add a line like this to /etc/services:

verb( rsync 873/tcp)

and a single line something like this to /etc/inetd.conf:

verb( rsync stream tcp nowait root /usr/bin/rsync rsyncd --daemon)

Replace "/usr/bin/rsync" with the path to where you have rsync installed on

your system. You will then need to send inetd a HUP signal to tell it to

reread its config file.

Note that you should bf(not) send the rsync daemon a HUP signal to force

it to reread the tt(rsyncd.conf) file. The file is re-read on each client

connection.

manpagesection(GLOBAL OPTIONS)

The first parameters in the file (before a [module] header) are the

global parameters.

You may also include any module parameters in the global part of the

config file in which case the supplied value will override the

default for that parameter.

startdit()

dit(bf(motd file)) The "motd file" option allows you to specify a

"message of the day" to display to clients on each connect. This

usually contains site information and any legal notices. The default

is no motd file.

dit(bf(pid file)) The "pid file" option tells the rsync daemon to write

its process ID to that file.

dit(bf(port)) You can override the default port the daemon will listen on

by specifying this value (defaults to 873). This is ignored if the daemon

is being run by inetd, and is superseded by the bf(--port) command-line option.

dit(bf(address)) You can override the default IP address the daemon

will listen on by specifying this value. This is ignored if the daemon is

being run by inetd, and is superseded by the bf(--address) command-line option.

dit(bf(socket options)) This option can provide endless fun for people

who like to tune their systems to the utmost degree. You can set all

sorts of socket options which may make transfers faster (or

slower!). Read the man page for the code(setsockopt()) system call for

details on some of the options you may be able to set. By default no

special socket options are set. These settings are superseded by the

bf(--sockopts) command-line option.

enddit()

manpagesection(MODULE OPTIONS)

After the global options you should define a number of modules, each

module exports a directory tree as a symbolic name. Modules are

exported by specifying a module name in square brackets [module]

followed by the options for that module.

startdit()

dit(bf(comment)) The "comment" option specifies a description string

that is displayed next to the module name when clients obtain a list

of available modules. The default is no comment.

dit(bf(path)) The "path" option specifies the directory in the daemon's

filesystem to make available in this module. You must specify this option

for each module in tt(rsyncd.conf).

dit(bf(use chroot)) If "use chroot" is true, the rsync daemon will chroot

to the "path" before starting the file transfer with the client. This has

the advantage of extra protection against possible implementation security

holes, but it has the disadvantages of requiring super-user privileges,

of not being able to follow symbolic links that are either absolute or outside

of the new root path, and of complicating the preservation of usernames and groups

(see below). When "use chroot" is false, for security reasons,

symlinks may only be relative paths pointing to other files within the root

path, and leading slashes are removed from most absolute paths (options

such as bf(--backup-dir), bf(--compare-dest), etc. interpret an absolute path as

rooted in the module's "path" dir, just as if chroot was specified).

The default for "use chroot" is true.

In order to preserve usernames and groupnames, rsync needs to be able to

use the standard library functions for looking up names and IDs (i.e.

code(getpwuid()), code(getgrgid()), code(getpwname()), and code(getgrnam())). This means a

process in the chroot namespace will need to have access to the resources

used by these library functions (traditionally /etc/passwd and

/etc/group). If these resources are not available, rsync will only be

able to copy the IDs, just as if the bf(--numeric-ids) option had been

specified.

Note that you are free to setup user/group information in the chroot area

differently from your normal system. For example, you could abbreviate

the list of users and groups. Also, you can protect this information from

being downloaded/uploaded by adding an exclude rule to the rsyncd.conf file

(e.g. "bf(exclude = /etc/**)"). Note that having the exclusion affect uploads

is a relatively new feature in rsync, so make sure your daemon is

at least 2.6.3 to effect this. Also note that it is safest to exclude a

directory and all its contents combining the rule "/some/dir/" with the

rule "/some/dir/**" just to be sure that rsync will not allow deeper

access to some of the excluded files inside the directory (rsync tries to

do this automatically, but you might as well specify both to be extra

sure).

dit(bf(max connections)) The "max connections" option allows you to

specify the maximum number of simultaneous connections you will allow.

Any clients connecting when the maximum has been reached will receive a

message telling them to try later. The default is 0 which means no limit.

See also the "lock file" option.

dit(bf(log file)) When the "log file" option is set to a non-empty

string, the rsync daemon will log messages to the indicated file rather

than using syslog. This is particularly useful on systems (such as AIX)

where code(syslog()) doesn't work for chrooted programs. The file is

opened before code(chroot()) is called, allowing it to be placed outside

the transfer. If this value is set on a per-module basis instead of

globally, the global log will still contain any authorization failures

or config-file error messages.

If the daemon fails to open to specified file, it will fall back to

using syslog and output an error about the failure. (Note that the

failure to open the specified log file used to be a fatal error.)

dit(bf(syslog facility)) The "syslog facility" option allows you to

specify the syslog facility name to use when logging messages from the

rsync daemon. You may use any standard syslog facility name which is

defined on your system. Common names are auth, authpriv, cron, daemon,

ftp, kern, lpr, mail, news, security, syslog, user, uucp, local0,

local1, local2, local3, local4, local5, local6 and local7. The default

is daemon. This setting has no effect if the "log file" setting is a

non-empty string (either set in the per-modules settings, or inherited

from the global settings).

dit(bf(max verbosity)) The "max verbosity" option allows you to control

the maximum amount of verbose information that you'll allow the daemon to

generate (since the information goes into the log file). The default is 1,

which allows the client to request one level of verbosity.

dit(bf(lock file)) The "lock file" option specifies the file to use to

support the "max connections" option. The rsync daemon uses record

locking on this file to ensure that the max connections limit is not

exceeded for the modules sharing the lock file.

The default is tt(/var/run/rsyncd.lock).

dit(bf(read only)) The "read only" option determines whether clients

will be able to upload files or not. If "read only" is true then any

attempted uploads will fail. If "read only" is false then uploads will

be possible if file permissions on the daemon side allow them. The default

is for all modules to be read only.

dit(bf(write only)) The "write only" option determines whether clients

will be able to download files or not. If "write only" is true then any

attempted downloads will fail. If "write only" is false then downloads

will be possible if file permissions on the daemon side allow them. The

default is for this option to be disabled.

dit(bf(list)) The "list" option determines if this module should be

listed when the client asks for a listing of available modules. By

setting this to false you can create hidden modules. The default is

for modules to be listable.

dit(bf(uid)) The "uid" option specifies the user name or user ID that

file transfers to and from that module should take place as when the daemon

was run as root. In combination with the "gid" option this determines what

file permissions are available. The default is uid -2, which is normally

the user "nobody".

dit(bf(gid)) The "gid" option specifies the group name or group ID that

file transfers to and from that module should take place as when the daemon

was run as root. This complements the "uid" option. The default is gid -2,

which is normally the group "nobody".

dit(bf(filter)) The "filter" option allows you to specify a space-separated

list of filter rules that the daemon will not allow to be read or written.

This is only superficially equivalent to the client specifying these

patterns with the bf(--filter) option. Only one "filter" option may be

specified, but it may contain as many rules as you like, including

merge-file rules. Note that per-directory merge-file rules do not provide

as much protection as global rules, but they can be used to make bf(--delete)

work better when a client downloads the daemon's files (if the per-dir

merge files are included in the transfer).

dit(bf(exclude)) The "exclude" option allows you to specify a

space-separated list of patterns that the daemon will not allow to be read

or written. This is only superficially equivalent to the client

specifying these patterns with the bf(--exclude) option. Only one "exclude"

option may be specified, but you can use "-" and "+" before patterns to

specify exclude/include.

Because this exclude list is not passed to the client it only applies on

the daemon: that is, it excludes files received by a client when receiving

from a daemon and files deleted on a daemon when sending to a daemon, but

it doesn't exclude files from being deleted on a client when receiving

from a daemon.

dit(bf(exclude from)) The "exclude from" option specifies a filename

on the daemon that contains exclude patterns, one per line.

This is only superficially equivalent

to the client specifying the bf(--exclude-from) option with an equivalent file.

See the "exclude" option above.

dit(bf(include)) The "include" option allows you to specify a

space-separated list of patterns which rsync should not exclude. This is

only superficially equivalent to the client specifying these patterns with

the bf(--include) option because it applies only on the daemon. This is

useful as it allows you to build up quite complex exclude/include rules.

Only one "include" option may be specified, but you can use "+" and "-"

before patterns to switch include/exclude. See the "exclude" option

above.

dit(bf(include from)) The "include from" option specifies a filename

on the daemon that contains include patterns, one per line. This is

only superficially equivalent to the client specifying the

bf(--include-from) option with a equivalent file.

See the "exclude" option above.

dit(bf(incoming chmod)) This option allows you to specify a set of

comma-separated chmod strings that will affect the permissions of all

incoming files (files that are being received by the daemon). These

changes happen after all other permission calculations, and this will

even override destination-default and/or existing permissions when the

client does not specify bf(--perms).

See the description of the bf(--chmod) rsync option and the bf(chmod)(1)

manpage for information on the format of this string.

dit(bf(outgoing chmod)) This option allows you to specify a set of

comma-separated chmod strings that will affect the permissions of all

outgoing files (files that are being sent out from the daemon). These

changes happen first, making the sent permissions appear to be different

than those stored in the filesystem itself. For instance, you could

disable group write permissions on the server while having it appear to

be on to the clients.

See the description of the bf(--chmod) rsync option and the bf(chmod)(1)

manpage for information on the format of this string.

dit(bf(auth users)) The "auth users" option specifies a comma and

space-separated list of usernames that will be allowed to connect to

this module. The usernames do not need to exist on the local

system. The usernames may also contain shell wildcard characters. If

"auth users" is set then the client will be challenged to supply a

username and password to connect to the module. A challenge response

authentication protocol is used for this exchange. The plain text

usernames and passwords are stored in the file specified by the

"secrets file" option. The default is for all users to be able to

connect without a password (this is called "anonymous rsync").

See also the "CONNECTING TO AN RSYNC DAEMON OVER A REMOTE SHELL

PROGRAM" section in bf(rsync)(1) for information on how handle an

rsyncd.conf-level username that differs from the remote-shell-level

username when using a remote shell to connect to an rsync daemon.

dit(bf(secrets file)) The "secrets file" option specifies the name of

a file that contains the username:password pairs used for

authenticating this module. This file is only consulted if the "auth

users" option is specified. The file is line based and contains

username:password pairs separated by a single colon. Any line starting

with a hash (#) is considered a comment and is skipped. The passwords

can contain any characters but be warned that many operating systems

limit the length of passwords that can be typed at the client end, so

you may find that passwords longer than 8 characters don't work.

There is no default for the "secrets file" option, you must choose a name

(such as tt(/etc/rsyncd.secrets)). The file must normally not be readable

by "other"; see "strict modes".

dit(bf(strict modes)) The "strict modes" option determines whether or not

the permissions on the secrets file will be checked. If "strict modes" is

true, then the secrets file must not be readable by any user ID other

than the one that the rsync daemon is running under. If "strict modes" is

false, the check is not performed. The default is true. This option

was added to accommodate rsync running on the Windows operating system.

dit(bf(hosts allow)) The "hosts allow" option allows you to specify a

list of patterns that are matched against a connecting clients

hostname and IP address. If none of the patterns match then the

connection is rejected.

Each pattern can be in one of five forms:

quote(itemization(

it() a dotted decimal IPv4 address of the form a.b.c.d, or an IPv6 address

of the form a:b:c::d:e:f. In this case the incoming machine's IP address

must match exactly.

it() an address/mask in the form ipaddr/n where ipaddr is the IP address

and n is the number of one bits in the netmask. All IP addresses which

match the masked IP address will be allowed in.

it() an address/mask in the form ipaddr/maskaddr where ipaddr is the

IP address and maskaddr is the netmask in dotted decimal notation for IPv4,

or similar for IPv6, e.g. ffff:ffff:ffff:ffff:: instead of /64. All IP

addresses which match the masked IP address will be allowed in.

it() a hostname. The hostname as determined by a reverse lookup will

be matched (case insensitive) against the pattern. Only an exact

match is allowed in.

it() a hostname pattern using wildcards. These are matched using the

same rules as normal unix filename matching. If the pattern matches

then the client is allowed in.

))

Note IPv6 link-local addresses can have a scope in the address specification:

quote(

tt( fe80::1%link1)nl()

tt( fe80::%link1/64)nl()

tt( fe80::%link1/ffff:ffff:ffff:ffff::)nl()

)

You can also combine "hosts allow" with a separate "hosts deny"

option. If both options are specified then the "hosts allow" option s

checked first and a match results in the client being able to

connect. The "hosts deny" option is then checked and a match means

that the host is rejected. If the host does not match either the

"hosts allow" or the "hosts deny" patterns then it is allowed to

connect.

The default is no "hosts allow" option, which means all hosts can connect.

dit(bf(hosts deny)) The "hosts deny" option allows you to specify a

list of patterns that are matched against a connecting clients

hostname and IP address. If the pattern matches then the connection is

rejected. See the "hosts allow" option for more information.

The default is no "hosts deny" option, which means all hosts can connect.

dit(bf(ignore errors)) The "ignore errors" option tells rsyncd to

ignore I/O errors on the daemon when deciding whether to run the delete

phase of the transfer. Normally rsync skips the bf(--delete) step if any

I/O errors have occurred in order to prevent disastrous deletion due

to a temporary resource shortage or other I/O error. In some cases this

test is counter productive so you can use this option to turn off this

behavior.

dit(bf(ignore nonreadable)) This tells the rsync daemon to completely

ignore files that are not readable by the user. This is useful for

public archives that may have some non-readable files among the

directories, and the sysadmin doesn't want those files to be seen at all.

dit(bf(transfer logging)) The "transfer logging" option enables per-file

logging of downloads and uploads in a format somewhat similar to that

used by ftp daemons. The daemon always logs the transfer at the end, so

if a transfer is aborted, no mention will be made in the log file.

If you want to customize the log lines, see the "log format" option.

dit(bf(log format)) The "log format" option allows you to specify the

format used for logging file transfers when transfer logging is enabled.

The format is a text string containing embedded single-character escape

sequences prefixed with a percent (%) character. An optional numeric

field width may also be specified between the percent and the escape

letter (e.g. "bf(%-50n %8l %07p)").

The default log format is "%o %h [%a] %m (%u) %f %l", and a "%t [%p] "

is always prefixed when using the "log file" option.

(A perl script that will summarize this default log format is included

in the rsync source code distribution in the "support" subdirectory:

rsyncstats.)

The single-character escapes that are understood are as follows:

quote(itemization(

it() %a the remote IP address

it() %b the number of bytes actually transferred

it() %B the permission bits of the file (e.g. rwxrwxrwt)

it() %c the checksum bytes received for this file (only when sending)

it() %f the filename (long form on sender; no trailing "/")

it() %G the gid of the file (decimal) or "DEFAULT"

it() %h the remote host name

it() %i an itemized list of what is being updated

it() %l the length of the file in bytes

it() %L the string " -> SYMLINK", " => HARDLINK", or "" (where bf(SYMLINK) or bf(HARDLINK) is a filename)

it() %m the module name

it() %M the last-modified time of the file

it() %n the filename (short form; trailing "/" on dir)

it() %o the operation, which is "send", "recv", or "del." (the latter includes the trailing period)

it() %p the process ID of this rsync session

it() %P the module path

it() %t the current date time

it() %u the authenticated username or an empty string

it() %U the uid of the file (decimal)

))

For a list of what the characters mean that are output by "%i", see the

bf(--itemize-changes) option in the rsync manpage.

Note that some of the logged output changes when talking with older

rsync versions. For instance, deleted files were only output as verbose

messages prior to rsync 2.6.4.

dit(bf(timeout)) The "timeout" option allows you to override the

clients choice for I/O timeout for this module. Using this option you

can ensure that rsync won't wait on a dead client forever. The timeout

is specified in seconds. A value of zero means no timeout and is the

default. A good choice for anonymous rsync daemons may be 600 (giving

a 10 minute timeout).

dit(bf(refuse options)) The "refuse options" option allows you to

specify a space-separated list of rsync command line options that will

be refused by your rsync daemon.

You may specify the full option name, its one-letter abbreviation, or a

wild-card string that matches multiple options.

For example, this would refuse bf(--checksum) (bf(-c)) and all the various

delete options:

quote(tt( refuse options = c delete))

The reason the above refuses all delete options is that the options imply

bf(--delete), and implied options are refused just like explicit options.

As an additional safety feature, the refusal of "delete" also refuses

bf(remove-sent-files) when the daemon is the sender; if you want the latter

without the former, instead refuse "delete-*" -- that refuses all the

delete modes without affecting bf(--remove-sent-files).

When an option is refused, the daemon prints an error message and exits.

To prevent all compression when serving files,

you can use "dont compress = *" (see below)

instead of "refuse options = compress" to avoid returning an error to a

client that requests compression.

dit(bf(dont compress)) The "dont compress" option allows you to select

filenames based on wildcard patterns that should not be compressed

when pulling files from the daemon (no analogous option exists to

govern the pushing of files to a daemon).

Compression is expensive in terms of CPU usage, so it

is usually good to not try to compress files that won't compress well,

such as already compressed files.

The "dont compress" option takes a space-separated list of

case-insensitive wildcard patterns. Any source filename matching one

of the patterns will not be compressed during transfer.

The default setting is tt(*.gz *.tgz *.zip *.z *.rpm *.deb *.iso *.bz2 *.tbz)

dit(bf(pre-xfer exec), bf(post-xfer exec)) You may specify a command to be run

before and/or after the transfer. If the bf(pre-xfer exec) command fails, the

transfer is aborted before it begins.

The following environment variables will be set, though some are

specific to the pre-xfer or the post-xfer environment:

quote(itemization(

it() bf(RSYNC_MODULE_NAME): The name of the module being accessed.

it() bf(RSYNC_MODULE_PATH): The path configured for the module.

it() bf(RSYNC_HOST_ADDR): The accessing host's IP address.

it() bf(RSYNC_HOST_NAME): The accessing host's name.

it() bf(RSYNC_USER_NAME): The accessing user's name (empty if no user).

it() bf(RSYNC_PID): A unique number for this transfer.

it() bf(RSYNC_REQUEST): (pre-xfer only) The module/path info specified

by the user (note that the user can specify multiple source files,

so the request can be something like "mod/path1 mod/path2", etc.).

it() bf(RSYNC_ARG#): (pre-xfer only) The pre-request arguments are set

in these numbered values. RSYNC_ARG0 is always "rsyncd", and the last

value contains a single period.

it() bf(RSYNC_EXIT_STATUS): (post-xfer only) the server side's exit value.

This will be 0 for a successful run, a positive value for an error that the

server generated, or a -1 if rsync failed to exit properly. Note that an

error that occurs on the client side does not currently get sent to the

server side, so this is not the final exit status for the whole transfer.

it() bf(RSYNC_RAW_STATUS): (post-xfer only) the raw exit value from code(waitpid()).

))

Even though the commands can be associated with a particular module, they

are run using the permissions of the user that started the daemon (not the

module's uid/gid setting) without any chroot restrictions.

enddit()

manpagesection(AUTHENTICATION STRENGTH)

The authentication protocol used in rsync is a 128 bit MD4 based

challenge response system. This is fairly weak protection, though (with

at least one brute-force hash-finding algorithm publicly available), so

if you want really top-quality security, then I recommend that you run

rsync over ssh. (Yes, a future version of rsync will switch over to a

stronger hashing method.)

Also note that the rsync daemon protocol does not currently provide any

encryption of the data that is transferred over the connection. Only

authentication is provided. Use ssh as the transport if you want

encryption.

Future versions of rsync may support SSL for better authentication and

encryption, but that is still being investigated.

manpagesection(EXAMPLES)

A simple rsyncd.conf file that allow anonymous rsync to a ftp area at

tt(/home/ftp) would be:

verb(

[ftp]

path = /home/ftp

comment = ftp export area

)

A more sophisticated example would be:

verb(

uid = nobody

gid = nobody

use chroot = no

max connections = 4

syslog facility = local5

pid file = /var/run/rsyncd.pid

[ftp]

path = /var/ftp/pub

comment = whole ftp area (approx 6.1 GB)

[sambaftp]

path = /var/ftp/pub/samba

comment = Samba ftp area (approx 300 MB)

[rsyncftp]

path = /var/ftp/pub/rsync

comment = rsync ftp area (approx 6 MB)

[sambawww]

path = /public_html/samba

comment = Samba WWW pages (approx 240 MB)

[cvs]

path = /data/cvs

comment = CVS repository (requires authentication)

auth users = tridge, susan

secrets file = /etc/rsyncd.secrets

)

The /etc/rsyncd.secrets file would look something like this:

quote(

tt(tridge:mypass)nl()

tt(susan:herpass)nl()

)

manpagefiles()

/etc/rsyncd.conf or rsyncd.conf

manpageseealso()

bf(rsync)(1)

manpagediagnostics()

manpagebugs()

Please report bugs! The rsync bug tracking system is online at

url(http://rsync.samba.org/)(http://rsync.samba.org/)

manpagesection(VERSION)

This man page is current for version 2.6.9 of rsync.

manpagesection(CREDITS)

rsync is distributed under the GNU public license. See the file

COPYING for details.

The primary ftp site for rsync is

url(ftp://rsync.samba.org/pub/rsync)(ftp://rsync.samba.org/pub/rsync).

A WEB site is available at

url(http://rsync.samba.org/)(http://rsync.samba.org/)

We would be delighted to hear from you if you like this program.

This program uses the zlib compression library written by Jean-loup

Gailly and Mark Adler.

manpagesection(THANKS)

Thanks to Warren Stanley for his original idea and patch for the rsync

daemon. Thanks to Karsten Thygesen for his many suggestions and

documentation!

manpageauthor()

rsync was written by Andrew Tridgell and Paul Mackerras.

Many people have later contributed to it.

Mailing lists for support and development are available at

url(http://lists.samba.org)(lists.samba.org)