Official website — Download — Community — Trello board

OpenSpades is a compatible client of Ace of Spades 0.75.

• Can connect to a vanilla/pyspades/pysnip server.
• Uses OpenGL/AL for better experience.
• Open source, and cross platform.

OpensPides is simply a clone of OpenSpades, with a few slight tweaks to get it to run on the Pi

Before you start: In case you're having issues to build OpenSpades, it may be because this README file is outdated, if so:

1. See the Building Guide, which may be up to date
2. Or open an issue if the problem persists

This version of OpenSpades comes with an installer which should allow you to install OpenSpades on the Raspberry Pi without any tweaking.

Requirements: -Raspberry Pi 2 or 3 (Might work on other Pi's, but probably not at a speed that makes it worth trying.) -Raspbian -Sudo privileges -An internet connection -Adequate storage space on your Hard Drive (Hopefully at least 500MB, not sure...). A flash drive is preferred as opposed to an SD Card as the primary drive -Patience. The Installer will take a few hours to run

First, download the installer with:

wget https://raw.githubusercontent.com/R2D2FISH/OpensPides/d1a3cb1a40d1052e18a05c48166db7a2c1d2b4e6/openspades-installer.sh

Then navigate to the directory where the installer was created, and type:

chmod +x openspades-installer.sh

and:

bash openspades-installer.sh

Although you can run the installer as root, it is not recommended, as you will be unable to access the installer's files.

The installer has a few notable command line arguments. If you do not want it to attempt to update your system to the latest version, add -noupdate. To prevent it from installing its dependencies (for whatever reason) add -nodependencies. To prevent it from installing SDL or SDL_image, add -nosdl and -nosdl_image, respectively.

The installer can also be used to reinstall or update OpensPides. As long as you do not delete the files in the ~/OpensPides/InstallerFiles directory, it will automatically skip reinstalling its dependencies. And if the Pi crashes mid-installation, the program picks up where it left off.

The installer can also be used on a non-Pi Linux system, but this is not recommended.

On snap enabled systems, the latest pre-built stable release of OpenSpades can be installed with:

snap install openspades

Once installed, you'll be able to launch OpenSpades from inside the desktop menu or from your terminal with the openspades command.

GCC 4.9 / Clang 3.2 or later is recommended because OpenSpades relies on C++11 features heavily.

1. Install dependencies:

   On Debian-derived distributions:

   sudo apt-get install pkg-config libglew-dev libcurl3-openssl-dev libsdl2-dev \
     libsdl2-image-dev libalut-dev xdg-utils libfreetype6-dev libopus-dev libopusfile-dev cmake
   

   (because of a bug in some distributions, you might also have to install more packages by sudo apt-get install libjpeg-dev libxinerama-dev libxft-dev)

   On other distributions: Install corresponding packages from your repository (or compile from source).

2. Clone OpenSpades repository:

   git clone https://github.com/yvt/openspades.git && cd openspades

3. Create directory openspades.mk in cloned/downloaded openspades repo and compile:

   mkdir openspades.mk
   cd openspades.mk
   cmake .. -DCMAKE_BUILD_TYPE=RelWithDebInfo && make

4. Install OpenSpades (optional but recommended):

   sudo make install

   note: If you have a previous installation of OpenSpades, you have to uninstall it manually by sudo rm -rf /usr/local/share/games/openspades before installing a new one.

5. Launch:

   openspades (if installed) or cd $REPO_DIRECTORY/openspades.mk; bin/OpenSpades and enjoy

1. Get the required software if you haven't already:

• CMake 2.8+
• PowerShell 5.0
  • Integrated with Windows 10.
  • Older versions are not tested, but might work
• Visual Studio 2015
  • VS2013 is no longer supported, but might work
  • VS2017 is not yet supported, but might work

2. Grab the source code:

• From a release: https://github.com/yvt/openspades/releases
• Latest development version (0.1.0): https://github.com/yvt/openspades/archive/master.zip

3. Extract or checkout the source

• All examples will assume E:/Projects/openspades, update paths in the examples to reflect yours

4. Get (pre-compiled) copies of glew, curl, sdl2 and zlib, and place them in E:/Projects/openspades/Sources/Externals

• See the file E:/Projects/openspades/Sources/Externals/readme.txt for details and links to pre-compiled sets of libraries for your version of Visual Studio

5. Run CMake:

• Source: E:/Projects/openspades
• Binaries: E:/Projects/openspades/OpenSpades.msvc
• Generator: Visual Studio 14 (2015) (not Win64!)

6. Open E:/Projects/openspades/OpenSpades.msvc/OpenSpades.sln in Visual Studio.
7. Build the solution.

• The recommended build configuration is MinSizeRel or Release if you're not an developer
• The default build output directory is E:/projects/OpenSpades/OpenSpades.msvc/bin/BUILD_TYPE/

8. Copy all .dll files from Source/Externals/lib to the build output directory.
9. To get audio working, download a Windows release of OpenSpades, extract it, and copy the following dlls to the build output directory:

• For OpenAL audio: openal32.dll
• For YSR audio: YSRSpades.dll, libgcc_s_dw2-1.dll, libstdc++-6.dll, pthreadGC2.dll

10. Download the Non-free pak, extract it, and copy Nonfree/pak000-Nonfree.pak to the Resources folder inside your build output directory, which is probably E:/Projects/openspades/openspades.msvc/bin/BUILD_TYPE/Resources. You can also copy the paks contained in Official Mods/ folder of OpenSpades 0.0.12b to add more fonts and improve localization support of your build.
11. Copy Resources/PackageInfo.json to the Resources folder inside your build output directory.

1. Get the latest version of Xcode and OpenSpades source.
2. Get (pre-compiled) copies of libraries, and place them in Sources/Externals

• See the file Sources/Externals/readme.txt for details

4. Download OS X release of OpenSpades, show the package contents, and copy libysrspades.dylib to Sources/Externals/lib.
5. Download and extract the Non-free pak. After that, copy Nonfree/pak000-Nonfree.pak and font-unifont.pak to Resources/.
6. Open OpenSpades.xcodeproj and build.

For troubleshooting and common problems see TROUBLESHOOTING.

Please see the file named LICENSE.