A lightweight Raspberry Pi PWM fan temperature control program written in C language. It can read YAML formatted configuration and run in the background as a systemd service. (Of course, you will need a hardware module, which can be homemade or purchased. Thanks to Taobao: 七彩智能科技.)
sudo apt install libyaml-devgit clone https://github.com/tlsa/libcyaml.git
cd ./libcyaml
make install VARIANT=releasegit clone https://github.com/WiringPi/WiringPi.git
cd ./WiringPi
./buildsudo make install
sudo systemctl enable rpi-pwm-fan-control.service
sudo systemctl start rpi-pwm-fan-control.serviceThe configuration file will be installed to /usr/local/etc/rpi-pwm-fan-control/config.yaml.
channel: 15
temp_fan_start: 60
temp_fan_max: 75
temp_fan_stop: 55
pwm_start: 70
pwm_max: 100
delay: 2000sudo systemctl status rpi-pwm-fan-control.service
sudo journalctl -u rpi-pwm-fan-control.service -fsudo systemctl disable rpi-pwm-fan-control.service
sudo systemctl stop rpi-pwm-fan-control.service
sudo make uninstallThe configuration file will not be overwritten.
sudo systemctl stop rpi-pwm-fan-control.service
sudo make install
sudo systemctl daemon-reload
sudo systemctl start rpi-pwm-fan-control.service