CUPS with Google Cloud Print support, supports HP and many other printers. Docker image is based on phusion/baseimage:master branch.
Since synology has it's own implementation of CUPS, which starts automatically when printers got plugged in, even you explictly disabled CUPS services. It's necessary not only to disable CUPS services (or you can try other port than 631 to avoid port conflicts) but also modify service handler to prevent CUPS from being started. Plus, system level "Bonjour Service discovery --> Printer sharing via Bonjour" must be enabled.
synoservice --hard-disable cupsd
synoservice --hard-disable cups-lpd
synoservicecfg --hard-disable cupsd
synoservicecfg --hard-disable cups-lpd
synoservicectl --stop cups-lpd
synoservicectl --stop cupsdAlso edit /usr/share/init/cups-service-handler.conf with root privilidge and make sure below 3 lines are commented out, otherwise you can never stop them since they will always start themselves once a printer is detected.
if [ ${PRINTER_NUM} -gt 0 ]; then
#echo "Printer exist. Start cupsd and cups-lpd." || true
#/usr/syno/sbin/synoservice --start cupsd || true
#/usr/syno/sbin/synoservice --start cups-lpd || true
fiDue to fw issues some users may not be able to use the cloud mode of "google cloud print (gcp)", so only local mode is enabled by default. However, this can be easily changed via config file.
Just change it from:
{ "local_printing_enable": true, "cloud_printing_enable": false, "log_level": "INFO", "log_file_name": "/tmp/cloud-print-connector" }to
{ "local_printing_enable": true, "cloud_printing_enable": true, "log_level": "INFO", "log_file_name": "/tmp/cloud-print-connector" }then restart the container and you are ready to move on the next.
Host networking (--net="host") appears to be needed for GCP and Avahi to work. On synology NAS, ensure the cups service on Synology OS was disabled. Check the Synology documents for how to disable it. Otherwise, there will be conflicts between the OS and container.
Default configuration file for gcp is generated in /config/gcp/gcp-cups-connector.config.json. So if you need the config to be persistent, remember to map this folder to some persistent storage. CUPS uses the /config folder to store it's configuration files.
docker run -d --name="airprint" \
--restart=always \
--net=host --privileged="true" \
-e CUPS_USER_ADMIN=print \
-e CUPS_USER_PASSWORD=password \
-v /volume1/docker/airprint/config:/config \
-v /dev/bus/usb:/dev/bus/usb \
yaurora/cups-google-airprint:latestdocker run -d --name="airprint" \
--restart=always \
--net=bridge --privileged="true" \
-p 631:631 \ # you can try other ports but I didn't test it
-p 5353:5353 \
-e CUPS_USER_ADMIN=print \
-e CUPS_USER_PASSWORD=password \
-v /volume1/docker/airprint/config:/config \
-v /dev/bus/usb:/dev/bus/usb \
yaurora/cups-google-airprint:latestansible-playbook install_cups.yml
Project source: https://github.com/yaurora/cups-google-airprint