1. RAK WisBlock Starter Kit LINK
   Required/Recommended additional parts:
   * Antenna
   * Battery
   * Case
2. RAKwireless WisMesh Pocket All-in-one Meshtastic Handheld (All-In-One Device) (PRE-ORDER) LINK
3. LILYGO T-Echo (All-In-One Device) LINK
4. LILYGO T-Beam (Multiple editions available) LINK
   Required/Recommended additional parts:
   * Antenna
   * Battery
   * Case
5. Station G2 LINK
6. Heltec WiFi LoRa 32(V3) LINK

Note: Some of the nodes are "all-in-one" meaning it has a case, battery, etc. The other nodes will require extra parts to make a enclosed node. This might require an enclosure, antenna, battery, etc.

1. RAKwireless Ethernet Module WIZnet W5100S-L (RAK13800) LINK
2. RAKwireless PoE Module Silvertel Ag9905MT for RAK13800 (RAK19018) LINK

Note: The Ethernet module provides a RJ45 network connection. If you want to provide power to the module via POE, you need to also purchase the POE module. Both are required. Need to review the POE capabilities of your switch before purchasing. If you have any questions, ask in the Discord chat.

Links to builds:

• https://github.com/KE6MTO/MRY_SBC_MESH/wiki/Ethernet-W-POE-Build

1. Locally 3D printed by N6DTE LINK

1. 8.5 dBi N-Male Omni Outdoor LINK
2. 10 dBi N-Male Omni Outdoor LINK

1. Zulkit IP65 Waterproof ABS Plastic Electrical Box - Hinged Shell, 2 Cable Glands, 5.9 x 3.9 x 2.8 inch LINK

1. 4x Pack 3000mAh LINK

1. Ethernet Glands (TESTING BY A MEMBER): LINK
2. UF.L/IPX Female to N Type Female Bulkhead Mount Pigtail Cable 8inch Low Loss RG178 LINK
3. 10 Pairs 1.25 mm JST 2 Pin Micro Electrical Male and Female Connector Plug with 80mm Wire Cables LINK
4. Solar Panels for DIY build LINK
5. SS-12F16 Switch for 3D printed RAK wireless case