TODO: Include Patchnotes before 0.10.2

v0.10.2: Simple Differential Equation Support

+ The Calculator now supports differential equations (only general solution)

++ (Differential Equations will get their own tab for more complex tasks like particular solution)

+ The start-up-message is now displayed before the modules load to give feedback to the user that the program is loading.

+ You can now copy the x and y values for a plot with the context menu in the history if the advanced mode is enabled

+ Added a Patchlog.txt

v0.10.2.1: Better Differential Parser

+ The parser now supports y'(x) with y being any function (including sin etc.), ' being ',''," or ''' and x being any single unicode letter

v0.10.2.2: Bug Fix

+ Fixed a bug where ''' and '' were not correctly parsed

+ Improved handling of ODE's that do not include a "="

v0.11.0: Particular Solution

+ First Support for solving the particular solution of linear differential equations

++ (WIP: Needs Testing) (see InputExamples.txt for examples

+ You can now display the LaTeX version of the Solution of a history item via the context menu

v0.11.1: Always on Top

+ Added a checkbox to the options to try to force the Window to always stay in the foreground

++ Does not work always since this is only a request to the window manager which does not always grant this

+ When calculating an ODE the classifications are displayed in the console

v0.11.1.1: Start of Flag implementation

+ Start of Flag implementation

++ This has the effect that the output is easier to read

v0.11.1.2: Fix for Convert Button

+ Convert Button on Tab 2 works again

v0.11.1.3: Highlighting in LaTeX Input

+ The LaTeX input now highlights pairs

+ Differential equations without conditions now print their classification in the console, too.

+ Bools as the result of a function no longer raise an exception bit instead are displayed

+ "ans" is only replaced with the previous solution if it is not part of a word.

++ This means that you can Laplace transform (since the word transform was previously ripped apart...)

v0.11.1.4: Preparation for MultiDim Parser

+ First preparation for parsing things like matrix multiplication and Transposing matrices

v0.11.2: Better LaTeX Parser, better Derivative Input and new Test-Method

+ The LaTeX input is no longer evaluated but instead displayed as the user intended it

++ Use (expr).doit() to combine Matrices in the expression

++ Use evalf (just type it ANYWHERE) to evaluate everything

+ Added a test method that is executes many testinputs when typing "RUNTEST" in the calculator input

+ Added support for dots as derivatives

+ When a function without a variable is differentiated it is assumed x for ' and t for the dot

v0.11.2.1: Evalf for LaTeX

+ Most inputs now use the Evalf Flag to decide whether to Evaluate when converting to

v0.12.0: Keyboard Remapper Beginning

+ AltGr+1 now types ∫ , AltGr+3 now types √ , AltGr+p now types π

+ AltGr+Shift+Number types the number as subscript

v0.12.0.1: Streamlined Keyboard Remapper

+ Merged the two Remap lists

+ (Remapper is now has unused function to toggle it)

v0.12.0.2: Bug Fix and Top Bar

+ The Remapper is now really Toggable

+ The checkboxes for the Remapper and the Syntaxhighlighter are now in the bar where the Font Size Spinbox is to make them more accessible

+ Added Hotkeys to some options

v0.12.0.3: Remap Table Filled

+ The Remap Table is now filled with my custom layout for my Linux Laptop

v0.12.0.4: Bugfix

+ Fixed 2 Entries in the Remap Table

+ The MICRO SIGN (U+00B5) "µ" is now interpreted as GREEK SMALL LETTER MU (U+03BC) "μ" by the parser

v0.12.0.5: Bugfixes

+ Fixed ans not being replaced by last answer

+ Caused a memory leak to prevent random crashes as the memory leak is small enough to ignore it...

++ This does not make me happy and is a temporary solution but I NEED to stop the crashes... I hate QThreads...

+ Disabled option to not eval when converting to LaTeX for now due to unexpected bugs in sympy library...

v0.12.0.6: Bugfixes: Evaluate LaTeX

+ Reenabled Eval for LaTeX but gave it its own checkbox.

++ When the tick is not set a script is run independently from AMaDiA to convert to LaTeX

+++ This ensures that "with sympy.evaluate(False):" does not mess up everything (since it behaves odd when used in multithreaded Programms)

v0.12.0.7: Bugfix: Combining dot above for Windows

+ Fixed the keyboardremap for the combining dots above for ATextEdit and derived Classes.

++ It is still broken in all other cases since Windows is stupid...

v0.12.0.8: Preparation for Colour Changing

+ Restructured everything about Colours and Fonts in preparation to make these things changeable during runtime

v0.12.0.9: LaTeX Eval Tristate

+ The Eval checkbox on the LaTeX tab is now tristate:

++ Do not evaluate everything

++ Evaluate some things

++ Set Evaluate=True when parsing with SymPy

+ Fixed a bug that caused a crash when plotting fails

+ The Advanced Mode now allows you to try to plot everything from all tabs

v0.12.1: Exception Notification

+ When an Error occurs the user is now notified in the main window

++ A short Description is displayed as a tooltip when hovering over the message

++ Only the most recent Error, Warning or Notification is displayed. For older Errors and warning look in the console.

++ Not all exceptions are displayed in the main window. For all exceptions and more details you still have to look in the console.

v0.12.1.1: More Notifications

+ Added more Notifications

+ Converted the Comments that described the functions and methods into strings to allow VSC to display it in the quick info

+ Fixed a crash wehen AMaS.Exists != True

v0.12.1.2: AMaS notifications

+ AMaS can now return notifications when successful (Previously only when not successful)

v0.13.0: Chat

+ Added my simple chat program

++ You can use it to send text and text files over LAN connections

++ The implementation is not final.

++ The messages are not encrypted! Do not send sensible data

v0.13.1: New Paint

+ Added the option to choose between 2 Colour Palettes: Dark and Bright

+ The Chatwindows take the colour of the main window when they were opened

v0.13.1.1: Bugfix

+ Fixed a bug that would crash everything when trying to send a message from the Chat Server

v0.13.1.2: Bugfix

+ Fixed: Notifications in Bright Mode were resetting the background colour to the Dark Mode. Now the Bright Mode stays bright.

v0.13.1.3: Canvas Paint

+ When changing the colour all Canvas elements automatically refresh their colour

v0.13.1.4: negative power

+ The parser now supports ⁻¹,⁻²,...,⁻⁹,⁻⁰

+ The parser now supports ᵀ to transpose a matrix

+ All trailing zeroes are now removed from all numbers

v0.13.1.5: Inactive Plot Colour

+ Fixed the colour of inactive plots in bright mode

v0.13.1.6: Copy Notifications

+ Double-clicking the notification now copies it to the clipboard.

+ If LaTeX or Control are not installed the user now gets a notification.

v0.13.1.7: UI Preparation

+ Added Tab 5 for System Control

+ Added a tab widget to tab 3 in preparation for 3D-, Complex- and nD- Plotter

v0.13.1.8: Full Screen

+ F11 toggles fullscreen

+ Added the control library to the new External_Libraries folder

+ Added "How to install" to the readme and added 2 batch files to make installation and Running/Updating easy on Windows

v0.14.0: Assuming Direct CONTROL

+ New Tab: Control Tab

++ This tab is all about System Control

++ Input transfer function or state system to plot all associated plots

++ Double-click a plot to make it larger

++ Better Input and more output coming soon

+ (User Request) The LaTeX process is now started at the same time as AMaDiA to make the first display lass annoying

v0.14.0.1: 2nd Control Example

+ Added a 2nd Control Code Input Example to show a syntax for state space input

v0.14.1: Housecleaning

+ Cleaned up AMaDiA Folder by moving most code into a sub folder

++ Adjusted imports accordingly

+ Changed the Threading to use a Threadpool and worker classes

++ This Fixes the memory leak and prohibits that too many threads are active at the same time

++ The Threading mode can be changed back in the options menu

+ The Control Tab can now plot a system response for a specific input function

+ Some text files are now accessible from the UI

+ Temporarily disabled the Sympy Plotter because the control tab has broken it for unknown reasons...

++ Fixing this might take a while...

+ Streamlined folder-detection

v0.14.2: Super Plotter

+ The 2D Plot can now plot much much more reliable

++ x*exp(x) and ∫sin(x)+√(x)dx*sin'(x) are no longer a problem!

+ The SymPy Plotter will (probably) remain dead as it is not worth to fix it.

++ When the sympy plotter plots it also tries to plot all other pyplot plots

+++ This means that it makes it impossible for me to use pyplot anywhere else...

++ The sympy Plotter was never designed to be used in a GUI application anyways and the AMaDiA plotter looks better anyways.

++ Instead of trying to work around the badly implemented sympy plotter I will instead use the time to improve the AMaDiA plotter.

+ Added some comments to let VSCodes error-detection know that my code is correct and does not need to glow red and yellow...

v0.14.2.1: WIP Cleanup

+ Disabled the input tab in the control tab and removed the WIP tab in the Plot tab.

++ They should not be interactable to not confuse the user as they are currently blank

++ These were added to make future development easier as UI reworks can be a lot of work

v0.14.2.2: Welcome

+ When no message needs to be displayed on start the program now welcomes the user by username

v0.14.2.3: List Solve Fix

+ Lists are no longer processed with sympy.solve (as solving a list returns an empty list)

++ This means that "solve(a*x^2+b*x+c*1,x)" (which creates a list) no longer needs "Eval Functions" to be turned off!

v0.14.2.4: Control Input Development 1

+ UI part of the Input Tab in the Control Tab is now done.

++ Tab is still disabled since most of the functionality is not implemented yet.

+++ Changed "Reload Modules" to temporarily enable the Tab instead of reloading Modules

v0.14.2.5: Control Input Development 2

+ Fixed Error Display when System name is invalid

+ When changing the Order the columns for the Transfer Function are now added/removed from left instead of right

v0.14.2.6: Control Input Development 3

+ Renamed "Reload Modules" to "Dev Function"

+ More work on the Control input Tab

++ Added 4th input method that accepts a transfer function in most forms without the need to isolate the coefficients

v0.14.2.7: More Bode Phase Lines

+ The big version of the Bode plot has now more major y-ticks for the phase to increase readability

v0.14.3: Notification History and Better Keyboard Remapper

+ Made the alternate plotting value calculation throw an error in most cases in which it can't guarantee a correct plot

+ The Notification tooltip is now instantaneous and clicking on it opens the Notification History

++ The Notification History is updated for new notifications automatically

+ The Keyboard Remapper handles AltGr better and seems to win the fight against evil Windows most of the time

+ First implementation of superscript (^1 now prints ¹ when you are quick)

+ Improved the layout of the Dark Theme class in AMaDiA_Colour.py

v0.14.3.1: Synchronous Appearance

+ The Colour of all open sub-windows now changes when the colour of the main window is changed

+ The font size of all open sub-windows (except chat server and client) now changes when the font size of the main window is changed

v0.14.3.2: Error Button

+ After questioning some testers it seems that the Error label was not intuitive thus it is now a button

++ To make it even more intuitive the button now as a corresponding icon

v0.14.4: QoL

+ The Control Tab now tries to plot all plots independently and does not give up all if one fails

++ This means Bode/Nichols/Nyquist/pzmap of all systems can be displayed, even if the system response can not.

+ Tables no longer loop to the start/end but instead go to the next widget with tabulator

+ Textfields now use tabulator to select the next widget

+ Fixed multiline syntaxhighlighting for textfields

+ Control/Input/Transfer: return now selects next relevant field

+ Control/Input: The save buttons are now part of the upper splitter (as this makes immensely more sense)

+ Identified two colours (Light and Dark) and fixed the colour of the lines in Plotter/2D/Config

v0.14.4.1: Tab Hotkey

+ ctrl+NUMBER now changes between the main tabs

+ The Chat no longer crashes everything when no Networkconnection can be established

v0.14.4.2: Local Keyboard Remapper

+ The old Keyboard Remapper is working on all applications and is getting more and more stable but has its quirks

++ It is now located in the Options

+ A new local ( = only works in AMaDiA ) Remapper has taken the Top Bar Checkbox

++ This Remapper is much more stable, activated per default and works in all AMaDiA Windows

++ This Remapper does not need to be executed as root on Linux

++ The intention is not to remove the global Remapper but to supplement it

v0.15.0: Custom Window Frame

+ Added all functionality from the standard window frame into the main window

++ The main window makes a requests to the OS to not have a frame but the OS may deny this request

+ All elements from the main window are now more compact

+ Updated the AMaDiA.bat to close the console properly when Anaconda is installed in the User Folder

v0.15.0.1: Smoother Corner Buttons

+ The buttons to minimize/maximize/close are now visually integrated

v0.15.0.2: Deep Red

+ The Close button now shines in a deeper red

+ The Statusbar now displays the Window title on startup

+ The TopBar_Widget is now independent of the Main Window class and can thus be used for all windows

v0.15.0.3: Performance

+ Sped up the checks in the event filters to increase performance

+ Laid implemented new window frame for all subwindows except the chat

++ The new window frame on the subwindows is currently turned off as a differently coloured window border seems necessary

v0.15.0.4: Placeholder Functions

+ Added a placeholder function to zoom into the Single-Plot-view in the Control Tab

+ Prepared the removal of the Menubar and moving all its current function to the TabWidget's TabBar

v0.15.1: Even More Compact

+ The MenuBar is now compressed into one Button and the TopBar is now on the side of the TabBar

++ The old design with easy menu access is still implemented and will be toggleable in the future (current attempts failed)

+ Most context menus are now coloured and use the correct font

+ The MultiDim output now always displays something, even if it can't convert the solution to LaTeX

v0.15.1.1: Nyquist Distinction

+ The Nyquistplot now distinguishes between the primary and the mirror plot

v0.15.1.2: Further steps to toggle Compact Menu

+ Compact Menu will soon be toggleable

v0.15.1.3: Toggleable Compact Menu

+ The Compact Menu is now toggleable with Alt+C or using the Menu

+ The TopBar behaves much more smoothly

+ CloseButton now reaches all the way into the corner as a proper close button should

v0.15.2: Control Single Plot Zoom

+ You can now zoom into the Single Plot View in the Control-Tab

+ Split up the TODOs into 10 subcategories to get more out of the "Todo Tree" extension for VSC

v0.15.3: Palette and Font setting overhaul

+ Redid everything about Font and Palette setting to be based on an application-level (instead of per window)

++ This means more consistent behaviour and less work in the future

+ Changed the handling of notifications from window to Application level for easier handling

+ Added a scrollbar to Control-SingelPlot-ZoomFunction to allow smaller sizes for the window

v0.15.3.1: Fix for Error Notifications

+ Fixed the update of text and tooltip for the TopBarErrorButton when an Error-notification is send.

v0.15.3.2: Bugfix and Center-Hotkey

+ Fixed a crash that was caused when a notification that is only visible in advanced mode was send

+ ctrl+0 now centres all windows and resizes them

++ This is useful if the resize or move fields are outside of the screen which would require a restart of the application

+ Added 2 new entries to BUG-INPUT.txt

v0.15.3.3: Beginning of AMaS Rework and typo correction

+ Started to rework AMaS

+ Corrected all typos in the code

v0.15.3.4: TopBar init change

+ The __init__() from TopBar_Widget now takes 4 bools to call its init()

++ When using TopBar_Widget in QtDesigner one can add a layout and other widgets to the TopBar_Widget

+++ init() must be called after adding a layout thus the __init__() and init() must be separable

v0.15.3.5: Folder Creation improvement

+ Thanks to exist_ok=True creating a folder no longer raises an exception which must be ignored

++ This means that the code can now be simplified

v0.15.4: Multithreading save Notifications

+ Added a new function that can send notifications

++ This new function is multithread save and can be called from anywhere without any concern

+++ This allows me to revolutionize the notifications in future updates as I am no longer limited to sending signals from QThread/QRunnable

+++ The same method can be used to send other data to other windows and widgets and offers great flexibility in the future

v0.15.5: More readable Output and recent Notifications

+ The solution part of the output in the calculator is now inverse parsed to make it easier to read

++ The not-inverse-parsed solution is accessible via the "Copy Solution" option in the context menu

++ To ensure that the inverse parse makes no mistakes it is only used if parsing it again is equal to the original solution

+ The classifications of ODEs are now displayed as a notification

+ Removing trailing new lines and spaces from all notifications

+ When many notifications are send at the same time they are all displayed in the tooltip

++ The icon is set for the highest priority notification in the tooltip

++ The colour of the flash is for the latest notification that managed to start the flash-animation

+++ Note: When the flash-animation is currently running the start of a new flash-animation can fail

v0.15.6: Proper Window Frame

+ This update completes the custom window frame as all standard frame features are now implemented

++ Note: The size of (and effort that went into) this update would normally make it update 0.16.0

+++ As it completes goals of "v0.15.0: Custom Window Frame" I have decided to keep it as part of v0.15

+ Made custom Window-class that is now used by all windows except for the chat (Chat will be reworked in the future)

++ Has a proper frame around everything including MenuBar and StatusBar

+++ This frames makes the end of the window visible and allows me to use it for all windows without confusing the user

+++ Dragging the frame resizes the window

+++ Frame hides if window is maximized or in full-screen-mode

++ All windows (except chat) now have a global font size spin box

+ The MenuBar and the main TabBar now allow to move the window

+ When moving a window that is maximized or in full-screen-mode it first exits this mode

+ When moving a window to a corner/side of the screen it now fills it

+ The 'Copy Solution' context menu action is now at the very top

v0.15.6.1: Degree Support

+ Added support for degree "°"

++ "/°" converts to "*(360/pi/2)" and "°" converts to "/(360/pi/2)" thus ° converts a number to degree and /° to radiants

v0.15.6.2: Tab 5 Input Tab Bug Fix

+ Fixed a bug that caused the Save Button in the Input tab in tab 5 to not detect the current input method (TF,SS,etc.)

v0.15.6.3: Resizing Optimization

+ Reworked the resizing of the window to work reliable and smooth.

v0.15.6.4: More Windows

+ It is now possible to open several instances of AMaDiA_Internal_File_Display_Window as long as their files are different

++ This means that you can open the Examples and the Helpful Useable Commands at the same time!

++ If a window for a specific file name is opened twice the old instance is closed

+ The font size spin box now initializes with the correct font size for new windows

+ Each window now saves its standard size

++ This variable is applied when using "ctrl+0" and currently has no other use

v0.15.6.5: Tiny Fix

+ Control/Input/Transfer: Fixed the removal of leading entries that are 0

+ Fixed some typos in the patchlog

v0.15.7: Window Titles, Menu Fixes and Dev Functions

+ Added a new window to execute code during runtime for debug purposes (Application wide shortcut is ctrl+T)

+ Added a button to close all running threads that are used for calculations

++ This is a dirty implementation and it can only be implemented dirty! Use with caution!

+ Added a display for the currently running calculations

++ This means that the user can now see if a calculation is running without looking into the console

+ Added a new menu for all Dev-Functions that should be used with caution!

+ Fixed size problems with the MenuBar

+ Moved most window-frame related code to the widget definitions to clean up the code

+ The window title now has its own space in the bottom right corner

++ This frees the status bar to show other information like the aforementioned number of currently running calculations

+ Fixed the tool tips for the menu actions

v0.15.7.1: Screenshots

+ F12 now saves a screenshot of the current window

+ The folder path is now handled by the application instead of the main window

+ Finally added current screenshots!!!

v0.15.8: Full Equation as LaTeX

+ Added the option to display entire equations in LaTeX

+ MultiDim-tab: Now displays the equations instead of only the solution

+ MultiDim-tab: When copying the text or equation the matrix names are now replaced by the actual matrices

+ Added highlight colours to the dark theme

v0.15.8.1: Bug Fix for Bad MultiDim Names

+ Fixed a crash in the MultiDim tab when a bad name for a matrix like "(" was used in a calculation

+ Removed AMaS_old to avoid confusion when programming

v0.15.9: Options Window, PlusMinus and Flags

+ Added support for ± and ∓

+ Added a new options window

++ Moved keyboard remap to options window

++ Added a font combo box to the options window (which means that the setFont function is finally used to its full potential!)

++ Implemented the first Flags to control the format of the solutions of the calculator

+ Fixed a bug that caused the window to resize when clicking on the top edge in compact mode to move the window

+ When a new text edit is initialized the highlighter activation status is now read instead of just assumed to be True

v0.15.9.1: ToolTip Colour Fix

+ Finally fixed the ToolTip colour for dark theme

++ It turns out the colours for text and base were simple swapped...

++ I tried to fix this many times but never checked what colours I set. I just assumed they would be dark... They were not...)

++ Thankfully the problem was that I simply set the wrong values and not that qt has a bug

v0.15.9.2: Solve for Specific Variable and ToolTip Colour Fix for Windows

+ You can now set specific variables to solve equations for in the options window!

+ Improved handling of ± and ∓

+ Fixed the ToolTip colour for MS Windows (because MS Windows is "special" and needs the colour in a more explicit way than Linux)

+ Made the ToolTipBase darker

v0.15.10: History Copy QoL

+ You can now select what ctrl+c copies in the history when having a single item selected

+ Selecting multiple items in a History and then pressing ctrl+c now copies all

+ Double-clicking an item in the calculator history now pastes the input of that item into the Input Field

+ Added 'Copy Equation' to History context menu

++ This was already accessible via ctrl+c but the ctrl+c behaviour can now be changed which necessitates this option

+ Added 'Copy LaTeX Equation' to History context menu

+ "Preloading LaTeX" now uses a more complex string to ensure that LaTeX is fully preloaded

++ Previously "§1§" was used to preload but this only preloaded LaTeX partially

v0.15.10.1: Improved LineEdit Multi-Line-Paste

+ When pasting a multiline string into a LineEdit the line breaks are now also removed when the MimeData has more than just Plain Text

++ It was probably the case that the standard paste method preferred to paste HTML or /something else/ rather than the modified plain text

+++ The fix was to skip the standard print method but instead printing the plain text directly

+++ When the MimeData has no plain text the standard print method is still used which could cause line breaks to be pasted

++ Furthermore all lines are now isolated in parentheses to better indicated the former line breaks

v0.15.11: Notification Class

+ Implemented a notification class

++ This class can also handle the entire exception output, making the function ExceptionOutput obsolete

+++ ExceptionOutput now redirects to this new notification class and returns an object.

++++ This object should be compatible with all old code as the important string function (__str__,__add__,__radd__) are implemented

v0.15.12: Notification Class II

+ Notifications:

++ Replaced all old notifications by the new notification class (NC)

+++ The old notification system is completely removed

++ Added more information to existing notifications

+++ For example most notifications now include the function, the window and the user input that is associated with the notification

++ The notification window now displays all information about a selected notification

++ The changes of ExceptionOutput are reverted. Instead NC can now handle Exceptions on its own.

+++ Thanks to this the exception handling has been reduced to one line in most cases while being more readable in the code and giving more information in the notification!

++ Advanced-Mode-Notifications that were send while advanced more was off are now always listed in the notification window.

++ Changed requirement for recent notifications to be included in the tooltip

+ The context menu code now lives in the HistoryWidget to keep the main window code clean

+ NoEvalParse changes:

++ The NoEvalParse option for the LaTeX view must be turned on in the dev tab in the option window

+++ It turns out that the new process still influences the main program which makes the calculator unreliable

++ The half-checked state now checks if the LaTeX version equals the normal version

+++ This ensures that sin(2*2*t*pi) doesn't return the LaTeX sin(2*t*pi) but instead sin(4*t*pi)

+++ The old behaviour (without this check) is now the behaviour of the unchecked state if the box in the dev tab is not checked

++ Improved the NoEvalParse script to work more reliable (That stuff behaves weird, dude!!!)

++ The NoEvalParse should now be compatible with other OS than Windows and Linux

+++ This means that everything (excluding library dependencies) should be OS independent

+ Added ans1, ans2 and ans3 to access the solution of the last three items of the calculator list

++ ans is no longer the last calculated solution but instead a synonyme for ans1

++ All ans are isolated in parentheses to enable multiplication of complex numbers

+ Cleaned up the overhead of the code execution window

v0.15.12.1: Notification Class in AMaS

+ AMaS no uses the notification class instead of Notify in most cases.

+ The notification class cow saves its icon. (Currently unused)

v0.15.12.2: Bugfix

+ Fixed a crash when trying to use the control code input without advanced mode

+ When a notification has no message but an error, the error is used as the message.

+ Fixed a minor bug for the LaTeX converter

++ The bug had a workaround so it was not noticeable for the user but this fix might increase quality in some cases

v0.15.13: Notification Class III

+ Added new NotificationWidget that is used by the notification window and includes all methods

++ Also made changes to the NotificationListWidget and created the NotificationInfoWidget

++ Notifications in the NotificationListWidget now display their icon (if they have one)

+ Cleaned up the NotifyUser method from AMaDiA_Main_App and removed a lot of redundant code and methods

++ The icon attribute of NC from v0.15.12.1 is used here

+ Reworked the notification system of AMaS to use NC everywhere and adjusted the workers and threads accordingly

++ This new system also represents the first use of mutex in AMaDiA (I should really get to make AMaS more thread save...)

+ Reworked the notification system of the LaTeX displays to use NC everywhere

++ The two control widgets are the last things that need to switch to NC

+ Fixed a crash when disabling Threadpool-mode

+ Fixed the MTabWidget and MMenuBar moving when clicking on the top edge without moving the mouse

+ Made some minor modifications on NC

+ Fixed a bug that would cause notifications to apply wrong colours when changing the colour palette

v0.15.13.1: Full Traceback

+ NC now stores (and displays) the full traceback

+ Fixed a crash (introduced in v0.15.13) when pressing return while the calculator input field was empty