I have an developer account and I want to delete it.How do I do that?
Dive into the vast array of tools, services, and support available to developers.
Post
Replies
Boosts
Views
Activity
I have purchased $99 developer account program 10 days back and still its in pending status. How much time does it normally takes to get activated? & How long do i have to wait for getting it done? I am from outside of US. If anyone knows the solution please help!!
My developer account pending for more that 48 hours.When I login to http://developer.apple.com, it show the following message:Purchase your membership.To continue your enrollment, complete your purchase now.Your purchase may take up to 48 hours to process.I have already paid the membership fee and got the E-invoice from apple.Could anyone help to solve this problem?Thanks.
I have found multiple forum postings where people have asked for how they can delete or remove a Signing Certificate. Unfortunately none of them are helpful. Some respond with non-helpful questions like "Why do you want to delete your Signing Certificate?" I'll tell you why I want to delete it. It's mine and I don't want it any more. I want it gone! Others have responded to similar questions by saying to just create a new Apple ID. I don't want to do that either. I like my world clean and orderly without junk laying around, so that answer is not acceptable either. I want clear instructions on how to delete or remove a Signing Certificate. Interestingly, the option to delete it is there but it's grayed out. Why have it there if you can't delete it? Can someone please help me with this?
This page talks about the Feedback Assistant app for developers, and how it's the preferred way to submit feedback. But I didn't see anything obvious about how to get it. So I look for it in the app store. Nothing.About 5 minutes of searching brings me back to a well-hidden sentence on that page saying that it's on the home screen if you have a Beta version installed, but you can enable it on the publicly released versions by "installing a beta profile".I have no idea what that means. I can find no info on the web or the searching the developer site about how to "install a beta profile". I find instructions for installing Beta versions of iOS, but don't see anything about how to get the app without actually installing a beta OS.I did find a (sketchy as F...) website called betaprofiles.com <--- (don't click) that downloads and tries to install software on my Mac. (To which I said 'ell no). Seems an opportunist noticed this gaping vacuum that Apple created and stepped in to "fill it". I wonder how many people have gotten malware because of this lack of documentation.Sorry, frustrated as heck.OK, finally stumbled on the instructions in a MacWorld article. I guess I've started downloading "the profile", it will supposedly notify me when it's finished downloading, but I can't confirm that's actually happening. And I still don't even know what a "profile" is or what will happen if I "install" it.Seriously, this info should be easier to find. Searching these terms should bring up an informative article on apple.com at the top of the results, not some shady (AFAICT) malware site, and the best info being on MacWorld.
So I've been trying for almost two months to enroll in the developer program and have opened support tickets but have gotten nowhere. The first time I tried, my payment went through but was then reversed by Apple and taken back and my enrollment didn't go through. I called support and they said to try a different card, so I did. The same thing happened where it went through and then Apple took it back a few days later (I called both banks and they confirmed that the reversal was initiated by Apple). All attempts since then (including with a third card) will result in being redirected to a page with "Your payment authorization failed on card •••****. Please verify your information and try again, or try another payment method."Information is multiple times checked, and includes the card saved on the Apple ID which had gone through the first time, and I bought a small app in the app store to confirm that card was still working with Apple (it was). The only thing I haven't been able to do is enroll in the development program. When I call support they tell me to try the same things I've already tried multiple times and also say they aren't aware of any problems like this and say they haven't had any problems with developer enrollment payment processing. Has anyone else experienced this and been prevented from enrolling? Anyone know a way to get through and enroll?
There have been occasional questions about remote debugging. Unfortunately I see a couple of them which were reasonable basic questions got no answer at all. I will try this again. A couple questions had some mention of lldb server. In some cases clearly the people asking the questions already knew a bit about remote debugging. Yet I can find no documentation about it.Does XCode or other tools that will work with XCode support debugging over the internet? If so what are the reqirements re XCode version and macOS version, whether the client and server can have unmatched versions, etc.?My immediate need (without extra steps) is to debug a process running on Sierra (no XCode installed yet) from a development system running XCode 7.3.1 under El Capitan.The need for remote debugging is to be able to diagnose crashes that don't happen on my development systems. There have also been questions concerning crash logs, but crash logs are of limited use unless the crash can be opened into a debugger with full ability to examine the stack and local variables.Thanks in advance!
All-New Developer Forums"Connect with over 1000 Apple engineers and learn directly from experts. Redesign coming June 18."
It looks like these new forums are based on the new Apple Support Communities code. I frequently post on ASC so I know what does and does not work there. I will focus on features that need to be imported from ASC and features that don't.
Email notifications - Some people really like to work from e-mail notifications. ASC has notifications for participation, following, points, etc. Just make sure they always default to "OFF".
Subscriptions - ASC already has this and is (in my opinion) the ideal way to find and respond to questions. Essentially, this is just searching on multiple tags. The subscriptions is an interface to let me define what tags I want to search for by default.
Sorting - Primarily, we need to see messages sorted by descending timestamp.
Sorting - I would like to be able to sort by both created or updated timestamps. Sometimes I want to see bona fide new messages.
Searching - This is ASC's big weak spot. Search is virtually useless on ASC. You have to really tweak the "filters" to get anything useful out of it. Re-do this and then back-port it to ASC please.
Threads - Thread view is all messed up. This thread (https://developer.apple.com/forums/thread/134075) is a good example. It seems to be organized hierarchically, with new replies to individual posts appearing immediately after the post being replied to. This is really confusing. Just order it by timestamp.
ASC has a feature to automatically guess the target forum (tag in these forums) from the content of the question being asked. That would be useful here. Otherwise, you risk everything going into "iOS".
Provide an easy way to see my own posts to see if anything has been updated. ASC doesn't really offer this. I have found a custom filter query that I use to simulate the "Inbox" of an old version of ASC. None of those custom filters seem to work over here. This is another opportunity to fix and then port back to ASC.
Filtering - ASC has a complicated system of filtering. Please don't import that.
10. Subscriptions - If you do implement a subscriptions system like ASC, pay attention to unpopular forums. Otherwise, new question in popular forums will drown out questions in more specific forums. The "Top Tags" list has already started that. Of course "iOS" and "macOS" will be most popular. But if everybody uses only those tags, they become useless.
Specialties - This is part of ASC gamification system. I don't necessarily mind them, but they aren't implemented very well on ASC. One has to perform specific actions, such as asking a question, to start earning a speciality. What about people who don't ask questions? How do you handle people with multiple specialties? ASC seems to pick one at random and display it, which is very annoying.
Guidelines - I think the Terms of Use need to be expanded and be crystal clear about what is allowed and not. I've just seen my first help wanted ad here. Is that allowed? I don't know.
Other comments:
Very nice use of Markdown in the editor. This is probably not something that could be ported back to ASC. Developers should be able to handle it though.
I like the documentation links at the top of tag results pages.
My question set is fairly broad, but I can't seem to find any answers anywhere. As a fairly low-level developer, the vast majority of my work is done with Sublime Text, terminal-based compilers, IDEs like Coq's (coq.inria.fr), and code that has to be compiled by terminal.
These projects are at the very fabric of what I do, and I fear that Rosetta 2 will be inadequate until LLVM and other systems are updated to run natively on Apple Silicon. Honestly, I can't really afford complex virtualization systems like Parallels or VMWare (not that they help much) and I'd rather not give up MacOS for my Ubuntu desktop. I was raised on MacOS and I can't imagine losing features like scenes or seamless integration with the rest of my electronics.
I want to keep my initial post fairly simple and broad, but if anyone has any questions on what I need supported, feel free to ask. I am sure I'm not alone here.
I'm trying to preview a view from a swift package which is located in one of the target's directory subdirectories:
.
├── Package.swift
├── README.md
└── Sources
		└── SatelitUI
				└── Views
						└── MenuBar.swift
When I'm previewing a view from the MenuBar.swift file I'm getting following error:
NoBuildableEntriesError: active scheme does not build this file
Select a scheme that builds a target which contains the current file, or add this file to a target that is built by the current scheme.
Which is unexpected because the file should be a part of the SatelitUI target. The thing is it works just fine if I move it into the root target's directory (SatelitUI).
I'm unable to run my app with ASAN enabled when targeting a physical iOS device. Simulator targets do work.
With Xcode 12 and an iPad mini 4 running iOS 14 beta 1 I get the following error during app launch
==750==ERROR: AddressSanitizer failed to allocate 0xffffffffff9fc000 (-6307840) bytes at address 2db624000 (errno: 22)
==750==ReserveShadowMemoryRange failed while trying to map 0xffffffffff9fc000 bytes. Perhaps you're using ulimit -v With Xcode 11.5 and an iPad Air 2 running OS 12.4.1 the error is
==2177==Unable to find a memory range after restricting VM.
==2177==AddressSanitizer CHECK failed: /BuildRoot/Library/Caches/com.apple.xbs/Sources/clangcompilerrt/clang-1103.0.32.62/compiler-rt/lib/asan/asanmac.cc:92 "((0 && "cannot place shadow after restricting vm")) != (0)" (0x0, 0x0)
<empty stack>==2177==AddressSanitizer CHECK failed: /BuildRoot/Library/Caches/com.apple.xbs/Sources/clangcompilerrt/clang-1103.0.32.62/compiler-rt/lib/asan/../sanitizercommon/sanitizermallocmac.inc:143 "((!asaninitisrunning)) != (0)" (0x0, 0x0)
warning: could not execute support code to read Objective-C class data in the process. This may reduce the quality of type information available.
AddressSanitizer report breakpoint hit. Use 'thread info -s' to get extended information about the report.
(lldb) thread info -s
thread #1: tid = 0x1076c2, 0x000000011531e984 libclangrt.asaniosdynamic.dylib`__asan::AsanDie() My coworker is able to use ASAN with the same App using iPad Pro 10.5, iPadOS 13.5.1, Xcode 11.5
Are there any configuration changes I need to make to be able to use ASAN on my devices?
Our project is split up into multiple Pods with CocoaPods and I'm currently trying to convert all of our podspecs to SPM. One of our projects has XCFramework dependencies that I'm trying to include from a local source, but my project files are complaining that the modules couldn't be found when I try to import them. Is there something I'm missing here? My Package.swift file looks something like this:
// swift-tools-version:5.3
// The swift-tools-version declares the minimum version of Swift required to build this package.
import PackageDescription
let package = Package(
name: "MyPackage",
defaultLocalization: "en_us",
platforms: [
.iOS(.v12),
.watchOS(.v6),
.macOS(.v10_15)
],
products: [
.library(
name: "MyPackage",
targets: [
"MyPackage"
]),
],
dependencies: [
],
targets: [
.target(
name: "MyPackage",
dependencies: [
.byName(name: "LocalXCFramework")
],
path: "Sources/"
),
.binaryTarget(
name: "LocalXCFramework",
path: "Frameworks/LocalXCFramework.xcframework"
)
]
)
In this example, if I try to import the modules from LocalXCFramework, I get an error saying it couldn't be found.
In the talk, it was explained how to use a binaryTarget to add a .xcframework from a url, but what about a local path?
Take the following Package and file structure, is this the correct way to structure and refer to the .xcFramework?
| SamplePackage
| - | Package.swift
| - | README.swift
| - | Sources
| - | - | Sample
| - | - | - | file.swift
| - | - | SampleFramework
| - | - | - | framework.xcframework
| - | - | Tests
| - | - | - | LinuxMain.swift
| - | - | - | SampleTexts
| - | - | - | - | sampleTests.swift
// swift-tools-version:5.3
// The swift-tools-version declares the minimum version of Swift required to build this package.
import PackageDescription
let package = Package(
name: "Sample",
platforms: [
.iOS(.v13),
.macOS(.v10_12)
],
products: [
// Products define the executables and libraries produced by a package, and make them visible to other packages.
.library(
name: "Sample",
targets: ["Sample", "SampleFramework"]),
],
targets: [
// Targets are the basic building blocks of a package. A target can define a module or a test suite.
// Targets can depend on other targets in this package, and on products in packages which this package depends on.
.target( name: "Sample"),
.testTarget(
name: "SampleTests",
dependencies: ["Sample"]),
.binaryTarget(
name: "SampleFramework",
path: "framework.xcframework")
]
)
I am getting the following error(s): invalid custom path 'framework.xcframework' for target 'SampleFramework'
target path '/framework.xcframework' is not supported; it should be relative to package root
Hey people,
I'm using (or rather trying to use) Swift Packages for my project. This is not about the countless other bumps I found along the road. (Xcode/SPM is still very beta with Xcode 12.0.1 but I'll reserve complaining about for another day). But one I did not even something vaguely useful when googling it.
So I started out using file paths for my dependencies, like:
.package(name: "BlaBla", path: "/Users/me/GitDev/BlaBla")
for some reason that does not work when you want to chain dependencies (Another bug to fix, Apple!). So I wanted to change to versions using a git repo. I gave my repo a tag and put in:
.package(url: "ssh://me@server.local/usr/home/me/GitDev/BlaBla", from: "0.0.1"),
On the command line SPM has no problem resolving this:
% swift package resolve
Fetching ssh://me@…
Cloning ssh://me@…
Resolving ssh://me@… at 0.0.1
In Xcode though, I get the line from the title:
An unknown error occurred. username does not match previous request (-1)
(by the way I have copied this by hand as the message could not even be copy & pasted)
Any ideas how to solve this? Or even debug this any further?
best Roddi
I'm struggling with maintaining source-controlled collaboration when Xcode just cannot make up its mind about how to generate the schemes. I don't edit the scheme and I get these sort of changes in git.
from:
<BuildableProductRunnable
				 runnableDebuggingMode = "0">
to:
<RemoteRunnable
				 runnableDebuggingMode = "2"
				 BundleIdentifier = "com.apple.Carousel"
				 RemotePath = "/$(PRODUCT_NAME)">
It's pretty incomprehensible to me, but has anyone run into similar?
Is there a way I can delete my own question/post from the Apple Developer Forum?
Hi, I'm from the App Center SDKs team.
After updating Xcode from 12.4 to 12.5 our team faced build issues similar to this:
Multiple commands produce '/Users/user/Library/Developer/Xcode/DerivedData/AppCenter/Build/Products/Debug-iphonesimulator/AppCenter.framework':
1) Command: ProcessXCFramework /Users/user/appcenter-sdk-apple/AppCenter-SDK-Apple/XCFramework/AppCenter.xcframework /Users/user/Library/Developer/Xcode/DerivedData/AppCenter/Build/Products/Debug-iphonesimulator/AppCenter.framework ios simulator
2) Target 'AppCenter iOS Framework' has create directory command with output '/Users/user/Library/Developer/Xcode/DerivedData/AppCenter/Build/Products/Debug-iphonesimulator/AppCenter.framework'
Repro steps:
Build AppCenter iOS Framework target.
Build AppCenter target which creates an xcframework for iOS, macOS, and tvOS platforms.
Build AppCenter iOS Framework and/or AppCenter Analytics iOS Framework target.
Build SasquatchPuppet target (it uses AppCenter iOS Framework and AppCenter Analytics Framework targets).
After the issue happened only Product > Clean build folder can help.
We've tried to automate cleaning the build artifacts (BUILD_DIR) etc, but it doesn't help.
Also, we've tried to use separate Product Names for XCFramework and mere Frameworks, but it was not possible for us in the end because of the xcconfig variables visibility.
Similar issue:
https://developer.apple.com/forums/thread/679542
As presented in the talks and documentation I’ve seen so far, DocC works for public and open Swift symbols. But how about stuff for internal use?
We are developing a fairly complex mixed source SDK with several components, that would benefit greatly from direct integration of auxiliary content for diagrams and so on. But since many of these parts are for internal use only, they have module or below level visibility.
Is there a way to build an internal documentation target that includes this information with DocC, and — if so — how?
I have a project that previously built for x86_64 that includes
objective C, C and C++ files using Xcode 11.7. I am now trying to
upgrade my project so that it will build for both arm64 and x86_64 using
xcode 12.4. However, when I attempt to build, I receive many errors
relating to missing "CTYPE"s as well as functions missing from the
global namespace.
/Applications/Xcode12.4.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX11.1.sdk/usr/include/_wctype.h:53:24: Use of undeclared identifier '_CTYPE_A'
/Applications/Xcode12.4.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX11.1.sdk/usr/include/_wctype.h:53:33: Use of undeclared identifier '_CTYPE_D'
/Applications/Xcode12.4.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX11.1.sdk/usr/include/_wctype.h:71:10: Use of undeclared identifier '__istype'
/Applications/Xcode12.4.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX11.1.sdk/usr/include/_wctype.h:89:24: Use of undeclared identifier '_CTYPE_L'
/Applications/Xcode12.4.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX11.1.sdk/usr/include/_wctype.h:125:17: Use of undeclared identifier '__tolower'; did you mean 'towlower'?
/Applications/Xcode12.4.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/include/c++/v1/cctype:103:9: No member named 'isalnum' in the global namespace; did you mean 'iswalnum'?
/Applications/Xcode12.4.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/include/c++/v1/cctype:104:9: No member named 'isalpha' in the global namespace; did you mean 'iswalpha'?
There are more errors than this present but this is the gist of what I
am seeing. It should be noted that as far as I can tell I am not using
any of the functions or definitions in my code and that these errors
seem to be from functions and definitions deep in the SDK.
Is there anything I should be looking for in particular to resolve these build errors? Do I need to change a project setting?