LearnLearn the Mac OS X Command Line

Jim Hoskins
writes on September 27, 2012

This is a command line tutorial primarily conducted in in the OS X command line. Because of OSX’s unix heritage, much of the info here is also useful in other unix inspired systems, like the Linux command line.

The command line can be a scary place when you first encounter it. When you read some instructions that tell you to open up a terminal window and type some cryptic words and phrases, it can seem like you’ve been sucked into the matrix, expected to decrypt an endless stream of indecipherable characters.

Fear not, it’s really not that difficult to use. In fact, when you see an experienced user looking at a terminal that is scrolling line after line of text faster than you can even read it, they aren’t really reading it either. For the most part they may be scanning for some key words, but mostly they are just waiting for it to stop.

Check out our full library of learning courses.

How to use Terminal to open the command line

Before you can use it, you need to be able to find it.

So what we need to do is open the terminal. On OS X, open your Applications folder, then open the Utilities folder. Open the Terminal application. You may want to add this to your dock. I like to launch terminal by using Spotlight search in OS X, searching for “terminal”.

Anatomy of the Console

First let’s clarify a few terms.

Console: This is the system as a whole. This is both the command line as well as the output from previous commands.

Command Line: This is the actual line in a console where you type your command.

Prompt: This is the beginning of the command line. It usually provides some contextual information like who you are, where you are and other useful info. It typically ends in a $ . After the prompt is where you will be typing commands.

Terminal: This is the actual interface to the console. The program we use to interact with the console is actually a “terminal emulator”, providing us the experience of typing into an old school terminal from the convenience of our modern graphical operating system.

Use CLI to run a command

Nearly all commands follow a common pattern with 3 main parts. The program, the options, and the arguments. Let’s see an example.

$ ls -l ~

Type the code above. Do not type the leading $. This is a common convention used is denote what follows is a command to be run. Once you have typed it out, hit enter to run it, and see what happens.

The program is the verb. It describes what you want to do. In our example ls is the program.  ls is short for list, meaning, I want to see a list of files somewhere on my computer.

Options are like the adverb. They usually modify the way the program will run. In our example -l is an option. It’s short for “long”. Without this option, the list will be simply the filenames. When we modify the command with -l, it will display to us the files along with more detailed information. Options are just that: Optional. Any command should have some default behavior when called without options. Each command has it’s own options. Most often the order of the options do not matter, but occasionally they may.

The arguments are what’s left. In our case the ~ .These are the objects of our sentence. They describe what we want our command to act on. In our example the ~ is a shorthand name for a special folder on your computer: your home folder. So we are saying we want to list all of our files in our home folder. Some programs may not need arguments. For instance, without arguments, ls will list the files in the directory you are currently in. More on that later. Again, each program has different arguments, and the order of the arguments typically matter.

Where Are You?

In the console, you are always working in a directory, or folder, on your computer. We call this your working directory. You can see where you are using pwd(short for print working directory)

$ pwd

This command will print out your current location. You can change your directory with cd (short for change directory). If you pass it an argument, it will change your to that location, if it exists. Without an argument, it will take you to your home directory (~).

$ cd Documents

You’ll notice that I just passed it a directory named Documents, because I was in my home directory, that contains a directory called Documents. This is relative path, because I specified my destination relative to my current directory. I can provide an absolute path by providing the full path beginning with the /, or starting with my home directory (~) such as:

$ cd /Users/jim/Documents

or

$ cd ~/Documents

If you want to navigate “up”, that is to the directory that contains your current directory, you can use the special name ..which you can even use separated by slashes to navigate several levels up.

From my Documents directory, this command will take me up to my home directory.

$ cd ..

Get Some Help, man!

Even when you learn what commands you can use, there is still a lot of power in each command or program. There are often dozens of available options, and depending on your arguments, your command could behave in several different ways.

Fortunately, most commands have a manual. To read, use the man command. Pass the name of the command you want to learn about as it’s only argument. For instance to learn more about ls, run

$ man ls

The manual can be scrolled with the arrow keys or space bar. Pressing q will quit.

Want to know more about man? Run man man

Some more commands.

There are a ton of different commands you can use, but only a couple dozen will get you pretty effective in the command line.

We learned about ls, pwd, cd, and man.

Try using the man command to learn about these commands

  • mkdirMake a new directory
  • touchMake a new empty file
  • cpCopy a file
  • mvMove a file
  • rmRemove a file or directory (learn about the -r option)
  • less Show the contents of a file in a scrolling buffer

If you’re looking to take your programming to another level, check out our Techdegrees. Our faculty of tech professionals guide learners like you from mastering the fundamentals of coding to polishing the portfolio and skills of a job-ready software developer. Try one of them out with a free seven-day trial today.

25 Responses to “Learn the Mac OS X Command Line”

  1. Meihol Jhaveri on May 13, 2018 at 1:58 am said:

    I am so happy to learn quick. Thank you.

  2. Thanks for the humanity and clarity.

    Mike Delia

  3. Stephen Hice on March 1, 2018 at 9:06 am said:

    Great article. I worked for 30 years with AT&T / Lucent Technologies / Bell Labs and retired in 1998. I just purchased my first Mac-Book Pro and discovered that I could run Unix commands. Having worked with Unix V and C Language most of my career, you have brought back fond memories. Could you recommend a C or C++ compiler?

  4. WOW just what I was searching for. Came here by searching for Contractor

  5. Thanks Jim gonna kick some pirates out with dose of there own medicine hopefully thanks, iwith this New to me understanding got my head pointed towards goal!

  6. Amrit Pandey on July 6, 2017 at 2:49 am said:

    Hey, do we have documentation over Mac Terminal CLI, just like tldp.org for Linux? Otherwise for all the tools we gotta read the manuals.

  7. 5 years later, the article still makes sense. Thank you for great stuff!

  8. ‘man’ is very useful but gives too much information
    the manual of a ‘ls’ is even much longer than this article

  9. Hello, there! this is not my first time around terminal…. However, I have never really used. My line of work? Completely different!!!. Buuut! I just came a cross a big problem… I want to copy a whole bunch (thousands) of pictures from my old macbook to a new one. How can I do it using the terminal? Using Terminal… Can I transfer or import to an excel spreedsheet? if so… How?

  10. Hi,
    This is my very first experience with coding, so sorry if the question is stupid- what are ‘shells’?
    Thanks 🙂

  11. Faye Bridge on July 25, 2016 at 5:39 am said:

    Hi there! Please contact us at blog@teamtreehouse.com to discuss this further. Thanks!

  12. Yamaphetssz on June 7, 2016 at 9:26 am said:

    how to run something on your mac’s terminal?

  13. How can i use a give a filename with a special character “&” in the terminal ??

  14. I loved your post, pretty solid list for a beginner. I also found this website online with a few other commands: http://applemacosx.com/2015/11/29/mac-os-x-terminal-tutorial/

  15. Thank you, very helpful.

  16. Knew a few of these command features a number of years back, but —-
    Dang ageing, or rather lack of use.
    I used the command line on my former Pro Mac, but forgot many features.
    Frankly, was introduced to some of these back in my Wintel days over 30 years back in a govt. office by a pseudo techie, thus not totally forgotten.
    Peace Happy Holidays!

  17. Thanks Jim ! New in Mac terminal. Earlier used to with DOS comm. Easy to learn from ur blog.

  18. GeoAnna on July 31, 2013 at 9:19 pm said:

    Great page Jim! Very user friendly, well explained and interesting. I mostly knew everything but am reviewing to train some beginners on my project for how to use terminal and basic bash commands.

  19. jhekuzai on July 11, 2013 at 12:10 am said:

    lbs-imac-04:~ LBSIMAC04$ ls
    Desktop Movies Public
    Documents Music Sites
    Downloads NetBeansProjects Ten Thumbs Students
    Library Pictures
    lbs-imac-04:~ LBSIMAC04$

    I want to go with my applications.

    Anyone please.

    Thanks

  20. Sarah Toms on April 19, 2013 at 1:57 pm said:

    Very helpful. Thank you Jim. Newish to the Mac world and have had 2 left feet in the terminal window! 🙂

  21. There are a ton of different commands you can use, but only a couple dozen will get you pretty effective in the command line

  22. Thanks so much for this article! I’m trying to learn how to program for video games but I don’t even know how to use a terminal haha.

Leave a Reply

You must be logged in to post a comment.

Learn to code with Treehouse

Start your 7 day free trial today and get access to hundreds of video courses in web development, design and business!

Learn more