Jetting for IAME kart engines 4+
Setup X30, Super X30 & Leopard
ISEnet
Designed for iPad
-
- 6,99 €
Screenshots
Description
The easiest-to-use application for adjusting the carburetor of IAME X30, X30 Junior, X30 Super, and Leopard engines. Developed and verified in competition.
This app provides, for the current weather conditions and a given engine configuration (engine model, gas, etc.), a jetting and exhaust length recommendation for IAME Parilla X30 Senior or Junior (Tillotson & Tryton carbs), X30 Super 175cc & Leopard engines.
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the weather data.
The application is made up of four tabs that are described next.
- Results: In this tab, a recommended jetting and exhaust length setup are shown. These data are calculated depending on the weather conditions and the engine and track configuration given in the following tabs. The following values are given: high needle, low needle, pop-off pressure and exhaust length. Besides this information, the air density and density altitude are shown too. In addition, this tab lets do a fine tunning adjustment for the high and low needles to adapt to the concrete engine.
- Weather: In the second tab, called Weather, you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: You must set in this screen the information about the engine, that is, the engine type (Leopard, X30 Senior, X30 Junior X30 Super), carburetor, exhaust restrictions (for Junior engines), the oil mix ratio and the type of the circuit (short or long tracks). Depending of the track type, the jetting setups will be adapted.
- GPS: This tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, ºC and ºF for temperature.
What’s New
Version 1.7
Minor adjustment in the calculation model of junior engines after testing on the dynamometer.
App Privacy
The developer, ISEnet, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy.
Data Not Linked to You
The following data may be collected but it is not linked to your identity:
- Identifiers
- Usage Data
- Diagnostics
Privacy practices may vary based on, for example, the features you use or your age. Learn More
Information
- Provider
-
Ingenieria del Software ISEnet S.L. has identified itself as a trader for this app and confirmed that this product or service complies with European Union law.
- DUNS Number
- 460049962
- Address
- Calle De Las Moreras, 25 - A 1 B 28300 Aranjuez Madrid Spain
- Phone Number
- +34 600430897
- mobile@isenet.es
- Size
- 2.6 MB
- Category
- Sports
- Compatibility
-
- iPhone
- Requires iOS 12.0 or later.
- iPad
- Requires iPadOS 12.0 or later.
- iPod touch
- Requires iOS 12.0 or later.
- Mac
- Requires macOS 11.0 or later and a Mac with Apple M1 chip or later.
- Apple Vision
- Requires visionOS 1.0 or later.
- Languages
-
English, Arabic, Czech, Danish, Dutch, Finnish, French, German, Greek, Hebrew, Hungarian, Indonesian, Italian, Japanese, Korean, Malay, Norwegian Bokmål, Polish, Portuguese, Romanian, Simplified Chinese, Slovak, Spanish, Swedish, Thai, Traditional Chinese, Turkish, Ukrainian, Vietnamese
- Age Rating
- 4+
- Copyright
- © 2023 Ingeniería del Software ISEnet S.L.
- Price
- 6,99 €
Supports
-
Family Sharing
Up to six family members can use this app with Family Sharing enabled.