eMaxMobileApp 4+
Markus Schlegel
Designed for iPad
-
- 4,99 lei
Screenshots
Description
...the most advanced optimizing tool for STePS systems.
All Bluetooth capable displays SC-EM800, SC-E8000, SC-E7000, SC-E6100, SW-EN600-L switch and EW-EN100 cockpit are supported!
Additionally to DU-E80X0 motors, now DU-EP801, DU-EP800, DU-EP600, DU-E7000, DU-E6XXX and DU-E50X0 drive units are supported too.
Partially compatible also with the latest Shimano motor firmware versions!
See www.eMax-Tuning.com or get detailed & personal information via eMail from info@eMax-Tuning.com
What’s New
Version 1.83
TAKE CARE: For increasing motor max. support speed an additional license key is necessary! See also www.eMax-Tuning.com.
TAKE CARE: This version is not able to increase max. motor support with the latest motor firmware versions from Shimano!
Please have a look on the news section of www.eMax-Tuning.com/home-en#news for possibilities or contact us via info@eMax-Tuning.com.
This version 1.83 for STEPS drive units is capable to communicate with the SC-EM800, SC-E8000, SC-E7000, SC-E6100 display types, EW-EN100 cockpit as well as the SW-EN600-L unit.
Additionally to DU-E80X0 motors, now DU-EP800, DU-E7000, DU-E6XXX and DU-E50X0 drive units are supported too.
The new generation drive units DU-EP801 and DU-E600 as well as its variants RS and CRG are partially supported now
All "motor performance settings" and "special settings" (change of gear type, chainring & smallest rear sprocket size, remaining light time) could be used in the license free version.
Special to DU-E80X0 drive units:
With motor firmware equal or above 4.7.0 it is only possible to set the motor performance settings up to 300% assist ratio and torque to 70Nm.
(with motor firmware 4.2.7 - 4.6.1, the max. assist ratio value could be set 500%)
(with motor firmware 4.2.7 - 4.6.1 AND a valid license key the max. torque could be increased to 75Nm, max. peak power also would be increased then to 550W instead of standard 500W)
new in version 1.83 (07.09.24):
- bug fix for crash on some very rare bike configurations at 73% of bike information reading
new in version 1.82 (31.08.24):
- optimizations and minor bug fixes for DU-EP800
new in version 1.77 (30.06.24):
- partial compatibility for EP801/EP motor firmware 4.3.0
new in version 1.76 (15.06.24):
- new battery types and RS default values for generation 2 added
new in version 1.75 (12.06.24):
- bugfix for DU-E8000 motor firmware 4.10.0
new in version 1.74 (20.05.24):
- partial compatibility for DUEP800 (DUEP800, DUEP800-CRG) FW 4.2.0
- partial compatibility for DUE80X0 (DUE8000, DUE8080) FW 4.10.0
- partial compatibility for DUE7000 FW 4.8.0
- partial compatibility for DUE61X0 (DUE6100, DUE6100-CRG, DUE6110, DUE6180) & FW 4.8.0
- partial compatibility for DUE50X0 (DUE5000, DUE5080) FW 4.5.0
See also https://www.emax-tuning.com/eMax-possibilities.pdf
new in version 1.73 (15.04.24):
- partial compatibility for EP801/EP motor firmware 4.2.2
new in version 1.72 (26.03.24):
- partial compatibility for EP801/EP motor firmware 4.2.1
new in version 1.71 (09.02.24):
- partial compatibility for EP801/EP motor firmware 4.2.0
- minor optimizations
new in version 1.70 (23.10.23):
- minor bug fix
new in version 1.69 (09.10.23):
- minor improvements, change of EP801/EP6 message dialog texts
new in version 1.68 (29.09.23):
- adaption to DUE50X0 (DUE5000, DUE5080) FW 4.4.10
new in version 1.67 (11.09.23):
- bugfix for EP8 (DU-EP800) and new motor firmware 4.1.11
new in version 1.66 (07.09.23):
- adaption to DUEP801 (DUEP801, DUEP801-CRG) FW 4.1.1
- adaption to DUEP600 (DUEP600, DUEP600-CRG) FW 4.1.1
- adaption to DUEP800 (DUEP800, DUEP800-CRG) FW 4.1.11
- adaption to DUE80X0 (DUE8000, DUE8080) FW 4.9.5
- adaption to DUE7000 FW 4.7.7
- adaption to DUE61X0 (DUE6100, DUE6100-CRG, DUE6110, DUE6180) & FW 4.7.7
new in version 1.65 (02.09.23):
- EP801/EP6 change of max. peak power and max. torque range added
- EP801/EP6 "reduced max. speed setting" enabled and enhanced
- EP801/EP6 "motor angle setting" enabled
- SC-EN500 display added
- new cassette types added (just for reading)
- correction in EP8xx performance view site with jump to next edit field
- bugfix: display speed adjustment value was unintentionally jumping from max. value +5,0 back to -5,0 when pressing forward button
new in version 1.63 (31.03.23):
- update to newest firmware version 4.4.9 for DUE50X0
- update to newest firmware version 4.7.6 for DUE61X0 & DUE7000
- update to newest firmware version 4.1.10 for DUEP800 (EP8, EP8-CRG. EP8-RS)
App Privacy
The developer, Markus Schlegel, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy.
Data Not Collected
The developer does not collect any data from this app.
Privacy practices may vary based on, for example, the features you use or your age. Learn More
Information
- Provider
- Markus Schlegel
- Size
- 12 MB
- Category
- Sports
- Compatibility
-
- iPhone
- Requires iOS 12.0 or later.
- iPad
- Requires iPadOS 12.0 or later.
- iPod touch
- Requires iOS 12.0 or later.
- Mac
- Requires macOS 11.0 or later and a Mac with Apple M1 chip or later.
- Apple Vision
- Requires visionOS 1.0 or later.
- Languages
-
English
- Age Rating
- 4+
- Copyright
- © IBHardSoft
- Price
- 4,99 lei
Supports
-
Family Sharing
Up to six family members can use this app with Family Sharing enabled.