MTConnect.NET-JSON is an extension library to MTConnect.NET that provides reading and writing as JSON formatted Response Documents
Note: This Module is still under development and may be deprecated in the future. Please feel free to leave feedback or create Issues on GitHub.
Package Name | Downloads | Link |
MTConnect.NET-JSON | https://www.nuget.org/packages/MTConnect.NET-JSON |
JSON
The above document format ID can be used to specify a ResponseDocumentFormatter or EntityFormatter to output using this library
MTConnectDevicesResponse documents are formatted as shown below.
{
"header": {
"instanceId": 1675796631,
"version": "5.0.0.0",
"sender": "DESKTOP-HV74M4N",
"bufferSize": 150000,
"assetBufferSize": 1000,
"assetCount": 2,
"deviceModelChangeTime": "2023-02-07T19:03:51.4276271Z",
"creationTime": "2023-02-07T20:59:56.063869Z"
},
"devices": [
{
"id": "OKUMA.Lathe",
"type": "Device",
"name": "OKUMA-Lathe",
"uuid": "OKUMA.Lathe.123456",
"description": {
"manufacturer": "OKUMA",
"model": "LB3000",
"serialNumber": "3216549771",
"value": "Okuma MT Connect Adapter - Lathe"
},
"dataItems": [
{
"category": "EVENT",
"id": "L2avail",
"type": "AVAILABILITY",
"name": "avail"
}
],
"components": [
{
"id": "L2ct1",
"type": "Controller",
"name": "Controller",
"dataItems": [
{
"category": "EVENT",
"id": "L2estop",
"type": "EMERGENCY_STOP",
"name": "estop"
}
],
"components": [
{
"id": "L2p1",
"type": "Path",
"name": "path",
"dataItems": [
{
"category": "EVENT",
"id": "L2p1mode",
"type": "CONTROLLER_MODE",
"name": "p1mode"
}
]
}
]
}
]
}
]
}
MTConnectStreamsResponse documents are formatted as shown below.
- Streams
- ValueObservation
- ConditionObservation
- DataSetObservation
- TableObservation
- TimeSeriesObservation
{
"header": {
"InstanceId": 1675796631,
"Version": "5.0.0.0",
"Sender": "DESKTOP-HV74M4N",
"BufferSize": 150000,
"FirstSequence": 1,
"LastSequence": 138,
"NextSequence": 139,
"DeviceModelChangeTime": "2023-02-07T19:03:51.4276271Z",
"CreationTime": "2023-02-07T20:54:26.7903092Z"
},
"streams": [
{
"name": "OKUMA-Lathe",
"uuid": "OKUMA.Lathe.123456",
"componentStream": [
{
"component": "Path",
"componentId": "L2p1",
"name": "path",
"samples": [
{
"dataItemId": "L2p1Fact",
"name": "p1Fact",
"type": "PATH_FEEDRATE",
"subType": "ACTUAL",
"timestamp": "2023-02-07T19:03:51.4064826Z",
"sequence": 38,
"result": "UNAVAILABLE"
},
],
"events": [
{
"dataItemId": "L2p1mode",
"name": "p1mode",
"type": "CONTROLLER_MODE",
"timestamp": "2023-02-07T20:58:08.739602Z",
"sequence": 139,
"result": "AUTOMATIC"
}
],
"condition": [
{
"level": "WARNING",
"dataItemId": "L2p1system",
"name": "p1system",
"type": "SYSTEM",
"timestamp": "2023-02-07T20:30:16.8639659Z",
"sequence": 137,
"result": "Not Found",
"nativeCode": "404"
},
{
"level": "FAULT",
"dataItemId": "L2p1system",
"name": "p1system",
"type": "SYSTEM",
"timestamp": "2023-02-07T20:30:38.9662297Z",
"sequence": 138,
"result": "Interval Error",
"nativeCode": "500"
}
]
}
]
}
]
{
MTConnectAssetsResponse documents are formatted as shown below.
{
"header": {
"InstanceId": 1675796631,
"Version": "5.0.0.0",
"Sender": "DESKTOP-HV74M4N",
"AssetBufferSize": 1000,
"AssetCount": 2,
"DeviceModelChangeTime": "2023-02-07T19:03:51.4276271Z",
"CreationTime": "2023-02-07T21:07:46.4658671Z"
},
"assets": [
{
"assetId": "tool.2",
"type": "CuttingTool",
"timestamp": "2023-02-07T19:04:19.8594137Z",
"deviceUuid": "OKUMA.Lathe.123456",
"serialNumber": "1",
"toolId": "KSSP300R4SD43L240",
"manufacturers": "KMT,Parlec",
"cuttingToolLifeCycle": {
"cutterStatus": [
"NEW"
],
"toolLife": {
"type": "PART_COUNT",
"countDirection": "UP",
"limit": 10
},
"programToolNumber": "1",
"connectionCodeMachineSide": "CV50",
"measurements": [
{
"type": "BodyDiameterMax",
"value": 73.25,
"units": "MILLIMETER",
"code": "BDX"
},
{
"type": "OverallToolLength",
"value": 323.86,
"units": "MILLIMETER",
"code": "OAL",
"maximum": 324.104,
"minimum": 323.596,
"nominal": 323.85
},
{
"type": "UsableLengthMax",
"value": 82.55,
"units": "MILLIMETER",
"code": "LUX",
"nominal": 82.55
},
{
"type": "CuttingDiameterMax",
"value": 76.262,
"units": "MILLIMETER",
"code": "DC",
"maximum": 76.213,
"minimum": 76.187,
"nominal": 76.2
},
{
"type": "BodyLengthMax",
"value": 222.259,
"units": "MILLIMETER",
"code": "LBX",
"maximum": 222.504,
"minimum": 222.004,
"nominal": 222.25
},
{
"type": "DepthOfCutMax",
"value": 62.383,
"units": "MILLIMETER",
"code": "APMX",
"nominal": 60.96
}
]
}
},
{
"assetId": "file.patrick2",
"type": "File",
"timestamp": "2023-02-07T21:11:21.3576018Z",
"deviceUuid": "OKUMA.Lathe.123456",
"name": "file-123.txt",
"mediaType": "text/plain",
"applicationCategory": "DEVICE",
"applicationType": "DATA",
"size": 123456,
"versionId": "test-v1",
"state": "PRODUCTION",
"fileLocation": {
"href": "C:\\temp\\file-123.txt"
},
"creationTime": "2022-06-16T14:23:46.4347597Z"
}
]
}