Contains 3 docker compose environments:

• prod (in root of this repository)
• dev (uses sqlite)
• dev-postgres (uses postgresql)

The prod docker compose file starts up a production environment with gunicorn as the webserver, postgres as a database and redis for caching with nginx used as a reverse proxy.

The two develop environments don't use redis (caching), celery (jobs) or nginx.

The database, static files and uploaded images are mounted as volumes so the data is persisted. The only thing you need to do is update the docker images. Consult the docker volume command for details on how to access or backup this data.

It is recommended to regularly pull the latest version of the images from this repository, since sometimes new configurations or environmental variables are added.

Instead of editing the compose file or the env file directly, it is recommended to extend it. That way you can more easily pull changes from this repository.

For example, you might not want to run the application on port 80 because some other service in your network is already using it. For this, simply create a new file called docker-compose.override.yml with the following content:

services:
  nginx:
    ports:
      - "8080:80"

Now the port setting will be overwritten from the configured nginx service when you do a docker compose up. However, note that compose will concatenate both sets of values so in this case the application will be binded to 8080 (from the override) and 80 (from the regular compose file). It seems that at the moment the only workaround is remove the ports settings altogether from the compose file.

The same applies to the env variables, just create a new file called e.g. my.env and add it after the provided prod.env for the web service (again, this is docker-compose.override.yml). There you add the settings that you changed, and only those, which makes it easier to troubleshoot, etc.:

web:
  env_file:
    - ./config/prod.env
    - ./config/my.env

To add a web interface for the celery queue, add a new service to the override file:

celery_flower:
  image: wger/server:latest
  container_name: wger_celery_flower
  command: /start-flower
  env_file:
    - ./config/prod.env
  ports:
    - "5555:5555"
  healthcheck:
    test: wget --no-verbose --tries=1 http://localhost:5555/healthcheck
    interval: 10s
    timeout: 5s
    retries: 5
  depends_on:
    celery_worker:
      condition: service_healthy

For more information and possibilities consult https://docs.docker.com/compose/extends/

1. Cd into the environment of your choice.

2. To start all services:

   docker compose up -d

Optionally download current exercises, exercise images and the ingredients from wger.de. Please note that load-online-fixtures will overwrite any local changes you might have while sync-ingredients should be used afterward once you have imported the initial fixtures:

docker compose exec web python3 manage.py sync-exercises
docker compose exec web python3 manage.py download-exercise-images
docker compose exec web python3 manage.py download-exercise-videos

docker compose exec web wger load-online-fixtures
# afterwards:
docker compose exec web python3 manage.py sync-ingredients

(these steps are configured by default to run regularly in the background, but can also run on startup as well, see the options in prod.env.)

Then open http://localhost (or your server's IP) and log in as: admin, password adminadmin

Just remove the containers and pull the newest version:

docker compose down
docker compose pull
docker compose up

To stop all services issue a stop command, this will preserve all containers and volumes:

docker compose stop

To start everything up again:

docker compose start

To remove all containers (except for the volumes)

docker compose down

To view the logs:

docker compose logs -f

You might need to issue other commands or do other manual work in the container, e.g.

 docker compose exec web yarn install
 docker compose exec --user root web /bin/bash
 docker compose exec --user postgres db psql wger -U wger

The easiest way to deploy this application to prod is to use a reverse proxy like nginx or traefik. You can change the port this application exposes and reverse proxy your domain to it. For this just edit the "nginx" service in docker-compose.yml and set the port to some value, e.g. "8080:80" then configure your proxy to forward requests to it, e.g. for nginx (no other ports need to be changed, they are used only within the application's docker network):

Also notice that the application currently needs to run on its own (sub)domain and not in a subdirectory, so location /wger { will probably only mostly work.

upstream wger {
    server 123.456.789.0:8080;
}

server {
    listen 80;
    listen [::]:443 ssl;
    listen 443 ssl;

    location / {
        proxy_pass http://wger;
        proxy_set_header Host $http_host;
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header X-Forwarded-Proto $scheme;
        proxy_redirect off;
    }

    server_name my.domain.example.com;

    ssl_certificate /path/to/https/certificate.crt;
    ssl_certificate_key /path/to/https/certificate.key;
}

If you want to use HTTPS like in the example config you need to add some additional configurations. Since the HTTPS connections are reversed proxied, the secure connection terminates there, the application will receive a regular HTTP request and django's CSRF protection will kick in.

To solve this, update the env file and either

• manually set a list of your domain names and/or server IPs CSRF_TRUSTED_ORIGINS=https://my.domain.example.com,https://118.999.881.119 If you are unsure what origin to add here, set the debug setting to true, restart and try again, the error message that appears will have the origin prominently displayed.
• or set the X-Forwarded-Proto header like in the example and set X_FORWARDED_PROTO_HEADER_SET=True. If you do this consult the documentation as there are some security considerations.

You might want to set DJANGO_DEBUG to true while you are debugging this is you encounter errors.

If everything works correctly, you will want to start the compose file as a service so that it auto restarts when you reboot the server. If you use systemd, this can be done with a simple file. Create the file /etc/systemd/system/wger.service and enter the following content (check where the absolute path of the docker command is with which docker)

[Unit]
Description=wger docker compose service
PartOf=docker.service
After=docker.service

[Service]
Type=oneshot
RemainAfterExit=true
WorkingDirectory=/path/to/the/docker/compose/
ExecStart=/usr/bin/docker compose up -d --remove-orphans
ExecStop=/usr/bin/docker compose down

[Install]
WantedBy=multi-user.target

Read the file with systemctl daemon-reload and start it with systemctl start wger. If there are no errors and systemctl status wger shows that the service is active (this might take some time), everything went well. With systemctl enable wger the service will be automatically restarted after a reboot.

Database volume: The most important thing to backup. For this just make a dump and restore it when needed

# Stop all other containers so the db is not changed while you export it
docker compose stop web nginx cache celery_worker celery_beat
docker compose exec db pg_dumpall --clean --username wger > backup.sql
docker compose start

# When you need to restore it
docker compose stop
docker volume remove docker_postgres-data
docker compose up db
cat backup.sql | docker compose exec -T db psql --username wger --dbname wger
docker compose up

Media volume: If you haven't uploaded any own images (exercises, gallery), you don't need to backup this, the contents can just be downloaded again. If you have, please consult these possibilities:

• https://www.docker.com/blog/back-up-and-share-docker-volumes-with-this-extension/
• https://github.com/BretFisher/docker-vackup

Static volume: The contents of this volume are 100% generated and recreated on startup, no need to backup anything

It is sadly not possible to automatically upgrade between postgres versions, you need to perform the upgrade manually. Since the amount of data the app generates is small a simple dump and restore is the simplest way to do this.

If you pulled new changes from this repo and got the error message "The data directory was initialized by PostgreSQL version 12, which is not compatible with this version 15." this is for you.

See also docker-library/postgres#37

# Checkout the last version of the composer file that uses postgres 12 
git checkout pg-12

# Stop all other containers
docker compose stop web nginx cache celery_worker celery_beat

# Make a dump of the database and remove the container and volume
docker compose exec db pg_dumpall --clean --username wger > backup.sql
docker compose stop db
docker compose down
docker volume remove docker_postgres-data

# Checkout current version, import the dump and start everything
git checkout master
docker compose up db
cat backup.sql | docker compose exec -T db psql --username wger --dbname wger
docker compose exec -T db psql --username wger --dbname wger -c "ALTER USER wger WITH PASSWORD 'wger'"
docker compose up
rm backup.sql

If you want to build the images yourself, clone the wger repository and follow the instructions for the devel image in the extras/docker folder.

Note: the docker images assume a wger user id of 1000. Since we mount the code and write from the image into your code repository, you may run into permission errors if your user id is not 1000. We don't have a good solution for such situation yet. Check your user id with echo $UID.

1. Clone https://github.com/wger-project/wger to a folder of your choice.
2. cd into the environment of your choice (dev or dev-postgres)
3. Copy .env.example to .env and set the path to correspond to the location where you have checked out the wger server git repo.

docker compose up
docker compose exec web /bin/bash
cp extras/docker/development/settings.py .

wger bootstrap                     # this creates initial db tables, runs yarn install, yarn build:css:sass, etc
python3 manage.py migrate          # safe to ignore: Your models in app(s): 'exercises', 'nutrition' have changes that are not yet reflected in a migration, and so won't be applied.
python3 manage.py sync-exercises   # pull exercises from wger.de (or other source you have defined)
wger load-online-fixtures          # pull nutrition information

# if you use sqlite, at this time you can make a backup if you want
# such that if you mess something up, you don't have to start from scratch
cp /home/wger/db/database.sqlite /home/wger/db/database.sqlite.orig

# finally, this is important, start the actual server!
python3 manage.py runserver 0.0.0.0:8000

You can now login on http://localhost:8000 - there is one user account: admin, with password adminadmin The server should restart automatically when you change code, etc.

If you use dev you can use the sqlite3 program to execute queries against the database file. For postgres-sqlite you can use pgcli -h localhost -p 5432 -u wger on your host, with password wger

Feel free to contact us if you found this useful or if there was something that didn't behave as you expected. We can't fix what we don't know about, so please report liberally. If you're not sure if something is a bug or not, feel free to file a bug anyway.

• discord: https://discord.gg/rPWFv6W
• issue tracker: https://github.com/wger-project/docker/issues
• twitter: https://twitter.com/wger_project

All the code and the content is freely available:

• https://github.com/wger-project/

The application is licenced under the Affero GNU General Public License 3 or later (AGPL 3+).