Arduino FOC for BLDC and Stepper motors - Arduino Based Field Oriented Control Algorithm Library

Arduino library for A4988, DRV8825, DRV8834, DRV8880 and generic two-pin (DIR/STEP) stepper motor drivers

This library enables you to use Hardware-based PWM channels on RP2040-based boards, such as Nano_RP2040_Connect, RASPBERRY_PI_PICO, with either Arduino-mbed (mbed_nano or mbed_rp2040) or arduino-pico core to create and output PWM any GPIO pin. The most important feature is they're purely hardware-based PWM channels, supporting very high PWM freq…

Mackerel - A Version of Marlin for Lyman Extruders

Stepper Motor Controller

Stepper motor API for esp-idf.

I2Cwrapper is a firmware framework which helps you implement Arduino based I2C target (slave) devices for control of non-I2C hardware. Supports plain Arduinos, ESP8266, ESP32, SAMD, STM32, and ATtiny platforms.

Wi-Fi Stepper project repo

This library, a wrapper around ESP32 ledc library, enables you to use Hardware-based PWM channels on ESP32, ESP32_S2, ESP32_S3 or ESP32_C3-based boards to create and output PWM to pins. Using similar functions as some other FastPWM libraries, it enables you to port PWM code easily between platforms.

Python stepper motor library with customizable acceleration strategies and responsive, interruptible motor operations.

Arduino Step Motor Driver Library

This library enables you to use Hardware-based PWM channels on AVR-based boards, such as Nano, UNO, Mega, Leonardo, 32u4, etc., to create and output PWM. Using the same functions as other FastPWM libraries to enable you to port PWM code easily between platforms.

Control Arduino uno/mega/nano with Jetson nano linux command line

interrupt driven stepper controller inherited from AccelStepper

STM32F103C8T6 driver software for multi-axis co-ordinated motion control of multiple stepper motors.

This wrapper library enables you to use Hardware-based PWM on STM32F/L/H/G/WB/MP1 boards to create and output PWM to pins. The most important feature is they're purely hardware-based PWM channels. Therefore, their executions are very precise and not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mi…

Unix-like operating system for CNC / Machine Control applications

This library enables you to use Hardware-based PWM channels on Arduino AVR ATtiny-based boards (ATtiny3217, etc.), using megaTinyCore, to create and output PWM to pins. Using the same functions as other FastPWM libraries to enable you to port PWM code easily between platforms

A simple arduino CNC plotter which uses GRLB with H-bridge for driving Stepper motors. Uses DC motor for pen control mechanism.

Python codes for controlling a NEMA 17 stepper motor