ANSI / VT-100 Terminal emulator for Parallax Propeller microcontroller with VGA and USB support

Add-on board and firmware for the RC2014 computer to provide graphics capabilities

A driver for HUB75E RGB LED Matrix Panels driven from the Parallax Propeller V2

Single and Two-wheel driver objects P2 Spin2/Pasm2 for our 6.5" Hub Motors with Universal Motor Driver Board

VSCode support for SPIN/PASM for Propeller V1 and V2

Chip's Flash FS with a standard API for accessing the FLASH chip on the P2 Edge Module.

Visually combining fluid, binary digits on an RGB LED Matrix panel

P2 Object for interacting with the VL53L5CX Time-of-Flight Sensor

Reimplementation of "PNut for Windows" in typescript

Spin/Spin2 Language Server based vscode extension

A CMake toolchain for the Parallax P8X32A Propeller microcontroller.

The code for the Kevinbot v3 Sub-Board

Support for the book: "ROTOR 1 - Bau Dir Deinen Computer mit ein paar Chips und Drähten selbst"

P2 Object for I2C 16-chan Servo Driver with 6-axis arm control demo

DRV8833 PI Speed (not PID) Brushed DC motor controller for Parallax Propeller 2

Enable an RPi to serve as an IoT gateway for our P2 Hardware - requiring only minimal P2 footprint (pins, code-space, etc.)

The future home of our combined Flash and uSD filesystem for simultaneous use of the FLASH chip and the uSD card on a P2 Edge Module.

Exercise/Characterize Multiple servos connected via PCA9685 PWM controller