Meshtastic device firmware
Wifi & BLE driven passenger flow metering with cheap ESP32 boards
Arduino source codes and toolchain for WiFi_Kit_series made by HelTecAutomation.
Hello World example code for the new Heltec WiFi LoRa 32 (V3) board with LoRa SX1262 chip
Sensor remoto y autónomo de ruido ambiental
ASR Microelectronics ASR650x: development platform for PlatformIO
Third-party Arduino Library for Heltec E-Ink displays
Arduino project on a ESP32 for NO2 measurement sending the data with LoRaWan to TheThingsNetwork.
Estación metereológica DIY con comunicaciones LoRaWAN TTN
LoRa APRS Tracker for Heltec Cubecell GPS Boards
@SpacehuhnTech's esp8266-deauther for Heltec wifi kit 8 (with 0.91 OLED )
LoRa APRS Digipeater based for ESP32
It's an IoT DIY project which notifies you when you have received a parcel or a letter in your letterbox. This project uses an HelTec AB01 LoRaWAN module to send data over an LoRaWAN Gateway when WiFi is out of range. I use an Helium Gateway from the People's Network in order to forward packets over Helium Network which send data to AWS IoT Core…
Wifi/Lora Mesh Message System where more than 1 device acts as a mesh to extend coverage Long or Short Distance through Wifi or Wifi and Lora. No setup required just flash and go. Its so easy your granny could do it.
This DIY project is a LoRaWAN Rain Gauge based on CubeCell HTCC AB01 development Board.
Add a description, image, and links to the heltec topic page so that developers can more easily learn about it.
To associate your repository with the heltec topic, visit your repo's landing page and select "manage topics."