...
peripherals = [
    ...
    {
        driver = "qtoggleserver.mppsolar.SerialMPPSolarInverter"
        name = "myinverter"             # an optional name of your choice
        serial_port = "/dev/ttyUSB0"    # use /dev/hidraw0 if using the USB connection
        serial_baud = 2400              # this is the default
        model = "GK"                    # model letters found in inverter model (e.g. "GK" for "PIP 5048GK")
        blacklist_properties = [...]    # optional list of property names to be excluded
        # optional min SoC required to force battery into discharge mode (defaults to null, i.e. disabled)
        force_battery_discharge_min_soc = 10
        # optional min grid voltage required to force battery into charge mode (defaults to null, i.e. disabled)
        force_battery_charge_grid_min_voltage = 200 
    }
    ...
]
...

...
peripherals = [
    ...
    {
        driver = "qtoggleserver.mppsolar.BluetoothMPPSolarInverter"
        name = "myinverter"             # an optional name of your choice
        address = "00:1A:22:AA:BB:CC"   # bluetooth address of the device
        model = "GK"                    # model letters found in inverter model (e.g. "GK" for "PIP 5048GK")
    }
    ...
]
...