GitHub - nizvoo/hsms: JavaScript driver for HSMS protocol.

What is HSMS ?

SEMI E37 High-Speed SECS Message Services (HSMS) is the primary SEMI SECS/GEM transport protocol standard used. HSMS defines a TCP/IP based Ethernet connection used by GEM for host/equipment communication. It is intended as an alternative to SEMI E4 (SECS-I) for applications where higher speed communication is needed and the facilitated hardware setup is convenient.

What HSMS Driver Can Do ?

The driver can do every that the standard requires: defines message exchange procedures for using the TCP/IP network protocol.

Establishing a communication link between entities using a TCP/IP connection procedure
Developing and maintaining the protocol conventions necessary for exchanging SECS messages between entities
Sending and receiving data using TCP/IP
Recognizing error conditions
Ending communications formally to confirm both parties no longer need the TCP/IP connection
Breaking the communications link logically without any physical disconnect from the network medium
Testing the communications link for the purpose of connection integrity
Rejecting connection attempts from incompatible subsidiary standards

In addition, the SEMI E37 standard describes special considerations, such as network timeouts, and handling multiple connections, which should be taken into account in a TCP/IP implementation.

Getting started

Assuming you’ve already installed Node.js, create a directory to hold your application, and make that your working directory.

$ mkdir my-hsms
$ cd my-hsms

Use the npm init command to create a package.json file for your application. For more information on how package.json works, see Specifics of npm’s package.json handling.

$ npm init

This command prompts you for a number of things, such as the name and version of your application. For now, you can simply hit RETURN to accept all of them.

Now install HSMS driver in the my-hsms directory and save it in the dependencies list. For example:

$ npm i hsms-driver

Let's assume that you have a remote HSMS entity waiting for incoming connections (if you do not just follow the instructions below)

Create a new file called index.js and enter the following code:

const {
  Config,
  ConnectionMode,
  Connection } = require('hsms-driver')

const config = Config
  .builder
  .ip("192.168.0.1" /*enter the address of a remote HSMS entity*/ ) 
  .port(7000 /*enter the port it's listening at*/) 
  .mode(ConnectionMode.Active)
  .build();
    
const conn = new Connection(config);
    
conn
  .on("dropped", () => console.log(`connection dropped`)  )
  .on("established", p => console.log( "connection established" )  )
  
conn.start();

This app is trying to connect to a remote HSMS entity which is listening at IP 192.168.0.1 on port 7000. After establishing a connection driver raises "established" event.

In case if you do not have a working HSMS entity you can use a loopback address and two connection objects:

const {
  Config,
  ConnectionMode,
  Connection } = require('hsms-driver')
    
const connA = new Connection(Config
  .builder
  .ip("127.0.0.1")
  .port(7000)
  .mode(ConnectionMode.Active)
  .build());
      
const connP = new Connection(Config
  .builder
  .ip("127.0.0.1")
  .port(7000)
  .mode(ConnectionMode.Passive)
  .build());

connA 
  .on("dropped", () => console.log(`connection dropped`)  )
  .on("established", p => console.log( "connection established" )  )

connP 
  .on("dropped", () => console.log(`client connected`)  )
  .on("established", p => console.log( "client disconnected" )  )

connA.start();
connP.start();

In this case the app creates both active and passive connections and make them connect to each other.

Usage

The engine of HSMS message exchange is a connection object. In order to create a new connection we should provide proper configuration.

Config

To create a new configuration we should export a config object and set a few required properties.

const {
  Config,
  ConnectionMode } = require('hsms-driver')

First of all we should specify connection mode: active or passive. The passive mode is used when the local entity listens for and accepts a connect procedure initiated by the remote entity. The active mode is used when the connect procedure is initiated by the local entity.

Here is the example of the configuration for an active connection:

Config
  .builder
  .mode(ConnectionMode.Active)
  .ip("127.0.0.1"/*IP of a passive remote entity*/)
  .port(7000 /*port of a passive remote entity*/)
  .build();

And this is for the passive one:

Config
  .builder
  .mode(ConnectionMode.Passive)
  .ip("127.0.0.1"/*IP a local entity should bind to*/)
  .port(7000 /*port a local entity should listen at*/)
  .build();

In addition, we may specify our device code (also known as system bytes):

Config
  .builder
  // other properties omitted for brevity
  .device(1 /*this number depends on your situation*/)
  .build();

The final thing you may want to specify is control timers. The point is HSMS specification uses a set of internal timers to manage its own state machine. We can tune some aspects by setting proper values.

Export a required object:

const {
  Config,
  ConnectionMode,
  Timers } = require('hsms-driver')

and create a new instance the following way (every timeout value is set in seconds):

Config
  .builder
  // other properties omitted for brevity
  .timers(new Timers(
    1/*t3*/,
    1/*t5*/,
    1/*t6*/,
    12/*t7*/,
    2/*t8*/,
    0/*linked test*/))
  .build()

Here is a brief explanation of of every timer:

T3 (Reply timeout) Reply timeout. Specifies maximum amount of time an entity expecting a reply message will wait for that reply.
T5 (Connection Separation Timeout) Specifies the amount of time which must elapse between successive attempts to connect to a given remote entity.
T6 (Control Transaction Timeout) Specifies the time which a control transaction may remain open before it is considered a communications failure. Similar to t3 but for control messages.
T7 (Not Selected Timeout) Time which a TCP/IP connection can remain in NOT SELECTED state (i.e., no HSMS activity) before it is considered a communications failure.
T8 Maximum time between successive bytes of a single HSMS message which may expire before it is considered a communications failure.
Linked Test Time between link test messages.

If timeout values are not set or timer object is not set itself default timeout values will be used. For example:

Config
  .builder
  // other properties omitted for brevity
  .timers(new Timers())
  .build()

In this case timeout values will be the following:

Timeout	Duration (secs.)
T3	45
T5	10
T6	5
T7	10
T8	5
LT	0 (*if value is zero driver does not send link test request)

And here is a final sample for connection configuration:

const {
  Config,
  ConnectionMode,
  Timers } = require('hsms-driver')

const connActive = Config
  .builder
  .ip("192.168.154.1")
  .port(7000)
  .device(1)
  // timers not set -> driver will use default values
  .mode(ConnectionMode.Active)
  .build());

const connPassive = Config
  .builder
  .ip("192.168.154.1")
  .port(7000)
  // device not set -> driver will use 0
  .timers(new Timers(12, 20, 1, 2, 2, 10))
  .mode(ConnectionMode.Passive)
  .build())

Connection

The next step is to create a connection object:

const conn = new Connection(config);

Connection object supports a few events which are important for the message exchange:

established Physical connection has been established and the driver entered the selected state. This event means that we are ready for HSMS message exchange.
dropped Connection has been dropped and the driver entered not connected state.
recv New message has been received.
trx-complete Transaction has been closed (i.e. a primary message has been sent and proper reply has been received ). In case of timeout this event will still be raised with an empty reply and timeout code (e.g. 3 for T3).
timeout Driver fired a control timeout (e.g. connection did not receive a reply).
error Error occurred when handling a message.

Here is the example:

conn
  .on("established", p  => console.log( `connection established: ${p.ip}:${p.port}` ))
  .on("dropped", () => console.log(`connection dropped`))
  .on("recv", m => console.log(`${m.toString()}`))

Data Items

The main exchange unit within HSMS universe is a message. But every message consists of building blocks called data items. Every data item represents a value (or array of values) and data type. The driver supports the following types:

Data Type	Description
I1	1 byte integer (signed)
I2	2 byte integer (signed)
I4	4 byte integer (signed)
I8	8 byte integer (signed)
U1	1 byte integer (unsigned)
U2	2 byte integer (unsigned)
U4	4 byte integer (unsigned)
U8	8 byte integer (unsigned)
F4	4 byte floating point
F8	8 byte floating point
A	ASCII
List	list

Every data item has the following properties:

name Gets data item's name.
format Gets data item's format.
value Gets data item's value. In case or array returns an array of values. In case of a list returns an array of sub data items.
size Gets data item's size if exists. Most data items do not support the size: only strings and binary items has this property. If a given string value is shorter than the size it will be padded with spaces and vice versa if it is longer it will be trimmed.

To create a new data item the driver uses a builder pattern. Every data item is an immutable object: all properties are read-only and if you need to change anything you should create a new item.

First of all, to start working with items, you need to add the required types:

const {
  Config,
  ConnectionMode,
  Timers,
  DataItem, // +++,
  ItemFormat // +++ } = require('hsms-driver')

After that you can simply add items you need as shown below:

(I1) 1 byte integer (signed):

const i1 = DataItem.i1( "item-name-1", 12  );
const i1arr = DataItem.i1( "item-name-2", 12, 121, -8, "7"  );

console.log( i1.toString() ); // I1 item-name-1 [12]
console.log( i1.name ); // item-name-1
console.log( i1.format ); // 100 or ItemFormat.I1
console.log( i1.value ); // 12

console.log( i1arr.toString() ); // I1<4> item-name-2 [12,121,-8,7]
console.log( i1arr.name ); // item-name-2
console.log( i1arr.format ); // 100 or ItemFormat.I1
console.log( i1arr.value ); // Array(4) [12, 121, -8, 7]

(U1) 1 byte integer (unsigned):

const u1 = DataItem.u1( "u-item-name-1", 128  );
const u1arr = DataItem.u1( "u-item-name-2", 12, 121, 250  );

console.log( u1.toString() );// U1 u-item-name-1 [128]
console.log( u1.name ); // u-item-name-1
console.log( u1.format ); // 164 or ItemFormat.U1
console.log( u1.value ); // 128

console.log( u1arr.toString() ); // U1<3> u-item-name-2 [12,121,250]
console.log( u1arr.name ); // u-item-name-2
console.log( u1arr.format ); // 164 or ItemFormat.U1
console.log( u1arr.value ); // Array(3) [12, 121, 250]

(I2) 2 byte integer (signed):

const i2 = DataItem.i2( "item-name-3", 12  );
const i2arr = DataItem.i2( "item-name-4", 12, 121, -8, "7"  );

console.log( i2.toString() ); // I2 item-name-3 [12]
console.log( i2.name ); // item-name-3
console.log( i2.format ); // 104 or ItemFormat.I2
console.log( i2.value ); // 12

console.log( i2arr.toString() ); // I2<4> item-name-4 [12,121,-8,7]
console.log( i2arr.name ); // item-name-4
console.log( i2arr.format ); // 104 or ItemFormat.I2
console.log( i2arr.value ); // Array(4) [12, 121, -8, 7]

(U2) 2 byte integer (unsigned):

const u2 = DataItem.u2( "u-item-name-3", 12543  );
const u2arr = DataItem.u2( "u-item-name-4", 1212, 16521, "7765"  );

console.log( u2.toString() ); // U2 u-item-name-3 [12543]
console.log( u2.name ); // u-item-name-3
console.log( u2.format ); // 168 or ItemFormat.U2
console.log( u2.value ); // 12543

console.log( u2arr.toString() ); // U2<3> u-item-name-4 [1212,16521,7765]
console.log( u2arr.name ); // u-item-name-4
console.log( u2arr.format ); // 168  or ItemFormat.U2
console.log( u2arr.value ); // Array(3) [1212, 16521, 7765]

(I4) 4 byte integer (signed):

const i4 = DataItem.i4( "item-name-3", 54312432  );
const i4arr = DataItem.i4( "item-name-4", 43213212, 0x2121, "-817543"  );

console.log( i4.toString() ); // I4 item-name-3 [54312432]
console.log( i4.name ); // item-name-3
console.log( i4.format ); // 112 or ItemFormat.I4
console.log( i4.value ); // 54312432

console.log( i4arr.toString() ); // I4<3> item-name-4 [43213212,8481,-817543]
console.log( i4arr.name ); // item-name-4
console.log( i4arr.format ); // 112 or ItemFormat.I4
console.log( i4arr.value ); // Array(3) [43213212, 8481, -817543]

(U4) 4 byte integer (unsigned):

const u4 = DataItem.u4( "item-name-3", 76543124  );
const u4arr = DataItem.u4( "item-name-4", 4432132, 0x212154, "81754321" );

console.log( u4.toString() ); // U4 u-item-name-3 [76543124]
console.log( u4.name ); // u-item-name-3
console.log( u4.format ); // 176 or ItemFormat.U4
console.log( u4.value ); // 76543124

console.log( u4arr.toString() ); // U4<3> u-item-name-4 [4432132,2171220,81754321]
console.log( u4arr.name ); // u-item-name-4
console.log( u4arr.format ); // 176 or ItemFormat.U4
console.log( u4arr.value ); // Array(3) [4432132, 2171220, 81754321]

(F4) 4 byte floating point:

const f4 = DataItem.f4( "f-item-name-1", 54.3  );
const f4arr = DataItem.f4( "f-item-name-2", 21.6, -76.21, 245.6754 );

console.log( f4.toString() ); // F4 f-item-name-1 [54.3]
console.log( f4.name ); // f-item-name-1
console.log( f4.format ); // 144 or ItemFormat.F4
console.log( f4.value ); // 54.3

console.log( f4arr.toString() ); // F4<3> f-item-name-2 [21.6,-76.21,245.6754]
console.log( f4arr.name ); // f-item-name-2
console.log( f4arr.format ); // 144 or ItemFormat.F4
console.log( f4arr.value ); // Array(3) [21.6, -76.21, 245.6754]

(F8) 8 byte floating point:

const f8 = DataItem.f8( "f-item-name-3", 545432.343221  );
const f8arr = DataItem.f8( "f-item-name-4", 29541.66543, -76211.25431 );

console.log( f8.toString() ); // F8 f-item-name-3 [545432.343221]
console.log( f8.name ); // f-item-name-3
console.log( f8.format ); // 128 or ItemFormat.F8
console.log( f8.value ); // 545432.343221

console.log( f8arr.toString() ); // F8<2> f-item-name-4 [29541.66543,-76211.25431]
console.log( f8arr.name ); // f-item-name-4
console.log( f8arr.format ); // 128 or ItemFormat.F8
console.log( f8arr.value ); // Array(2) [29541.66543, -76211.25431]

String (pay attention to the size):

const a1 = DataItem.a( "item-name-9", "very long string", 5 );
const a2 = DataItem.a( "item-name-10", "short", 10 );

console.log( a1.toString() ); // item-name-9 [very ]
console.log( a1.name ); // item-name-9
console.log( a1.format ); // 64 or ItemFormat.A
console.log( a1.value ); //'very '
console.log( a1.size ); // 5

console.log( a2.toString() ); // A<10> item-name-10 [short     ]
console.log( a2.name ); // item-name-10
console.log( a2.format ); // 64 or ItemFormat.A
console.log( a2.value ); 'short     '
console.log( a2.size ); // 10

Lists:

const list = DataItem.list( "list-1",
  DataItem.a( "item-name-9", "very long string", 5 ),
  DataItem.i2( "item-name-3", 12  ),
  DataItem.list( "child-1",
    DataItem.u2( "age", 12  ),
    DataItem.a( "name", "John Smith", 30  ) ) );

console.log( list.toString() );
// List list-1
//  A<5> item-name-9 [very ]
//  I2 item-name-3 [12]
//  List child-1
//    U2 age [12]
//    A<30> name [John Smith                    ]
console.log( list.name ); // list-1
console.log( list.format ); // 0 or ItemFormat.List
console.log( list.value ); // Array(3) [DataItem, DataItem, DataItem]

Data Messages

As was told before the main exchange unit in HSMS is a message. That means if you need to send a data to a remote entity you should create a message, fill it with required data items and send via driver's API.

To create a message you need to add the required type:

const {
  Config,
  ConnectionMode,
  Timers,
  DataItem, 
  ItemFormat,
  DataMessage // +++  } = require('hsms-driver')

The driver uses a builder pattern. Every data message is an immutable object: all properties are read-only and if you need to change anything you should create a new message.

Every data message has the following properties:

device Gets a 15-bit field in the message header used to identify a sub-entity within the equipment. Device ID is a property of the equipment, and can be viewed as a logical identifier associated with a physical device or sub-entity within the equipment.
context Gets a message context used to identify a transaction uniquely among the set of open transactions. The context of a reply data message must be the same as those of the corresponding primary message. If you do not provide a context value for the primary message the driver will set unique value itself.
stream Gets a message stream.
func Gets a message function.
items Gets message's data items.
replyExpected Gets a value indicating whether the message expects a reply.
time Gets a time label used to identify message creation time.

Here is the example on how to create your first data message:

let m = DataMessage
  .builder
  .device( 1 )
  .stream( 5 )
  .replyExpected( false)
  .func( 1 )
  .items(
    DataItem.f4( "temperature", 12.1  ),
    DataItem.f8( "pressure", 14.53  ),
    DataItem.a( "description", "this is a long sensor description", 50  )) 
  .build();

console.log( m.device ); // 1
console.log( m.stream ); // 5
console.log( m.func ); // 1
console.log( m.replyExpected ); // false
console.log( m.context ); // 7107 (value generated by the driver)
console.log( m.items ); // Array(3) [DataItem, DataItem, DataItem]

When message building is over we are ready to send it. But before, let's summarize all the steps you have to take to send the message:

create a configuration object where you specify network and timeout details
create a connection based on the configuration, subscribe to events you need and call a method 'start'
create a data message with required stream and function numbers, add data items
send the message via 'send' method of the created connection object

Let's analyze a few examples:

Example #1: send a message which does not need a reply.

const {
  DataItem,
  DataMessage,
  Config,
  ConnectionMode,
  Connection } = require('hsms-driver')

const conn = new Connection( Config
  .builder
  .ip( "127.0.0.1" )
  .port( 7000 )
  .mode( ConnectionMode.Active )
  .build() );

conn
  .on("established", p  => console.log( `connection established: ${p.ip}:${p.port}` ))
  .on("dropped", () => console.log(`connection dropped`))
  .on("recv", m => console.log(m.toLongString() ))
  .on("timeout", (t, m) => console.log( `t${ t}` ) );

let m = DataMessage
  .builder
  .device( 1 )
  .stream( 5 )
  .replyExpected( false )
  .func( 1 )
  .items(
    DataItem.f4( "temperature", 12.1 ),
    DataItem.f8( "pressure", 14.53 ),
    DataItem.a( "description", "this is a long sensor description", 50 ) )
  .build();

const server = new Connection( Config
  .builder
  .ip( "127.0.0.1" )
  .port( 7000 )
  .mode( ConnectionMode.Passive )
  .build() );

server
  .on("established", p  => server.send(m )); 

server.start();
conn.start();

As soon as two driver gets connected a passive connection sends a data message and does not expect a reply.

Example #2: send a message and get a reply.

const {
  DataItem,
  DataMessage,
  Config,
  Message,
  ConnectionMode,
  Connection } = require('hsms-driver')

const conn = new Connection(Config
  .builder
  .ip("127.0.0.1")
  .port(7000)
  .mode(ConnectionMode.Active)
  .build());
   
conn
  .on("established", p => console.log(`connection established: ${p.ip}:${p.port}`))
  .on("dropped", () => console.log(`connection dropped`))
  .on("timeout", (t, m) => console.log(`client t${t}`))
  .on("recv", m => {
    if (m.kind == Message.Type.DataMessage) {
      console.log(`client recv ${m.toLongString()}`);
      switch (m.toString()) {
        case "S1F1":
          conn.send(DataMessage
            .builder
            .reply(m)
            .items(
              DataItem.a("name", "bob", 10),
              DataItem.u2("age", 12),
              DataItem.list("hobbies",
                DataItem.a("hobby-1", "basketball", 10),
                DataItem.a("hobby-2", "books", 15)))
            .build())
          break;
      }
    }
  });

let m = DataMessage
  .builder
  .device(1)
  .stream(1)
  .func(1)
  .items(
    DataItem.a("name", "alice", 10),
    DataItem.u2("age", 10))
  .build();

const server = new Connection(Config
  .builder
  .ip("127.0.0.1")
  .port(7000)
  .mode(ConnectionMode.Passive)
  .build());

server
  .on("established", p => server.send(m))
  .on("timeout", (t, m) => console.log(`server t${t}`))
  .on("recv", m => {
    if (m.kind == Message.Type.DataMessage) {
      console.log(`server recv ${m.toLongString()}`);
    }
  });

server.start();
conn.start();

As soon as two driver instances gets connected a passive connection sends a data message and receives a reply.

Example #3: send a message but get a timeout instead of a reply.

const {
  DataItem,
  DataMessage,
  Config,
  Message,
  ConnectionMode,
  Connection,
  Timers /*+++*/ } = require('hsms-driver')
    
const conn = new Connection(Config
    .builder
    .ip("127.0.0.1")
    .port(7000)
    .mode(ConnectionMode.Active)
    .build());

conn
  .on("established", p => console.log(`connection established: ${p.ip}:${p.port}`))
  .on("dropped", () => console.log(`connection dropped`))
  .on("timeout", (t, m) => console.log(`client t${t}`))
  .on("recv", m => {
    if (m.kind == Message.Type.DataMessage) {
      console.log(`client recv ${m.toLongString()}`);
      console.log("client does not answer on purpose");
    }
  });


const server = new Connection(Config
  .builder
  .ip("127.0.0.1")
  .port(7000)
  .timers(new Timers(2)) // decrease default T3 time
  .mode(ConnectionMode.Passive)
  .build());

server
  .on("established", p =>
    server.send(DataMessage
      .builder
      .device(1)
      .stream(1)
      .func(1)
      .items(
        DataItem.a("name", "alice", 10),
        DataItem.u2("age", 10))
      .build()))
  .on("timeout", (t, m) => console.log(`server t${t};this message caused a problem: ${m.toLongString()}`))
  .on("recv", m => {
    if (m.kind == Message.Type.DataMessage) {
      console.log(`server recv ${m.toLongString()}`);
    }
  });

server.start();
conn.start();

Passive connection sends a message but does not get a reply. We configured T3 timeout: changed default value to 2 seconds. As a result, two seconds after sending a message a passive connection gets a timeout. Pay attention:

By default all data messages expect a reply.
Timeout event provides a not answered message as a parameter

Example #4: transaction complete event.

const {
  DataItem,
  DataMessage,
  Config,
  Message,
  ConnectionMode,
  Connection } = require('hsms-driver')
      
const conn = new Connection(Config
  .builder
  .ip("127.0.0.1")
  .port(7000)
  .mode(ConnectionMode.Active)
  .build());

conn
  .on( "recv", m => {
    if( m.kind == Message.Type.DataMessage){
      switch( m.toString() ){
        case "S1F1":
          conn.send( DataMessage
            .builder
            .reply( m )
            .items(
              DataItem.a( "name", "bob", 10  ),
              DataItem.u2( "age", 12 ),
              DataItem.list( "hobbies", 
                DataItem.a( "hobby-1", "basketball", 10  ),
                DataItem.a( "hobby-2", "books", 15  )))
            .build() )
          break;
      }
    }
  } );
  
let m = DataMessage
  .builder
  .device( 1 )
  .stream( 1 )
  .func( 1 )
  .items(
    DataItem.a( "name", "alice", 10  ),
    DataItem.u2( "age", 10 ))
  .build();
  
const server = new Connection(Config
  .builder
  .ip("127.0.0.1")
  .port(7000)
  .mode(ConnectionMode.Passive)
  .build());
  
server
  .on("established", p  => server.send( m ))
  .on( "trx-complete", (m, r) => {
    console.log( `trx complete` )
    console.log( `sent: ${m.toLongString()}` )
    console.log( `recv: ${r.toLongString()}` )
  } );
  
server.start();
conn.start();

Example #5: message complete callback.

const {
  DataItem,
  DataMessage,
  Config,
  Message,
  ConnectionMode,
  Connection } = require('hsms-driver')

const conn = new Connection(Config
  .builder
  .ip("127.0.0.1")
  .port(7000)
  .mode(ConnectionMode.Active)
  .build());

conn
  .on("recv", m => {
    if (m.kind == Message.Type.DataMessage) {
      switch (m.toString()) {
        case "S1F1":
          conn.send(DataMessage
            .builder
            .reply(m)
            .items(
              DataItem.a("name", "bob", 10),
              DataItem.u2("age", 12),
              DataItem.list("hobbies",
                DataItem.a("hobby-1", "basketball", 10),
                DataItem.a("hobby-2", "books", 15)))
            .build())
          break;
      }
    }
  });

let m = DataMessage
  .builder
  .device(1)
  .stream(1)
  .func(1)
  .complete((m, r, tc) => {
    console.log(`custom message complete handler:`)
    console.log(`primary message ${m.toLongString()}`)
    console.log(`reply message ${r.toLongString()}`)
  })
  .items(
    DataItem.a("name", "alice", 10),
    DataItem.u2("age", 10))
  .build();

const server = new Connection(Config
  .builder
  .ip("127.0.0.1")
  .port(7000)
  .mode(ConnectionMode.Passive)
  .build());

server
  .on("established", p => server.send(m));

server.start();
conn.start();

As you can see, this example is very similar to the previous one, but here we are using message's complete handler instead of connection event.

Pay attention:

Only primary messages may have a complete handler.
If a message does not get a reply, event will still be raised with an empty reply and timeout code (e.g. 3 for T3). In other words, you may understand that this message caused a timeout.

Name		Name	Last commit message	Last commit date
Latest commit History 78 Commits
.vscode		.vscode
src		src
test		test
.eslintrc.json		.eslintrc.json
.gitignore		.gitignore
.npmignore		.npmignore
.travis.yml		.travis.yml
CHANGELOG.md		CHANGELOG.md
LICENSE		LICENSE
README.md		README.md
index.js		index.js
package-lock.json		package-lock.json
package.json		package.json
test-suite.js		test-suite.js
test-suite[old].js		test-suite[old].js
webpack.config.js		webpack.config.js

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

What is HSMS ?

What HSMS Driver Can Do ?

Getting started

Usage

Config

Connection

Data Items

Data Messages

About

Releases

Packages

Languages

License

nizvoo/hsms

Folders and files

Latest commit

History

Repository files navigation

What is HSMS ?

What HSMS Driver Can Do ?

Getting started

Usage

Config

Connection

Data Items

Data Messages

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages