GO HERE FOR UP TO DATE VERSION

Original scripts and basic implementation by tsoding, modified and expanded by myself.

ThemeManager.HC script created and submitted by Boketto.

All themes are approximations of their namesakes and are not 1:1 implementations. All documents and files contained in this repository are for educational purposes only. Theme contributions and alternative Windows-specific script contributions are welcomed.

rosé pine theme shown; Screenfetch app must be installed separately (see Additional Software).

• Overview
  • Dependencies
• Usage
  • Installing the base system
  • Running the VM
• Syncing Files
• Customization
  • Changing the theme
  • Installing a different fork of TempleOS
• Additional Software
• Bonus Tips

This repository aims to assist with setting up a complete TempleOS environment via QEMU, including all files from Terry's supplemental .ISO.C files on templeos.org.

These scripts are intended for use on Linux machines; Windows users will need to use a tool like ImDisk Toolkit to mount the virtual TempleOS drive and copy files to/from the VM.

A few notes:

• C: and :: can be used interchangeably in TempleOS to refer to the root of the C: drive (with :: referring to the root of the currently mounted disk)

• HomeSys.HC was uncompressed from the HomeSys.HC.Z located in C: by using the TOSZ tool to allow for easy external editing

• These scripts only affect the C: drive of a TempleOS installation; the D: drive (and any additional drives created when installing the TinkerOS.ISO) are kept clean unless manually mounted and edited

• QEMU
• rsync

The install.sh, mount.sh, run.sh, and sync.sh scripts use settings from base.conf; customize it to your liking. For example, you may want to add the following flag to enable sound: -audiodev alsa,id=snd0 -machine pcspk-audiodev=snd0. Replace alsa with pa for PulseAudio.

The net-run.sh and text-run.sh scripts use settings from net.conf and text.conf, respectively.

Clone this repository with the following command:

$ git clone https://github.com/bubstance/templeos

$ ./install.sh <name>.img

Follow the installer's instructions, then close the VM.

$ ./sync.sh temple <name>.img

Syncs the contents of the included Home directory into the TempleOS image.

This will create a raw 512MiB (~537MB) virtual disk image, which is a safe minimum and should be more than enough for most use cases. You can adjust the size by editing the value of QEMU_IMG_SIZE in base.conf. No suffix indicates kibibytes, M is for mebibytes, G is for gibibytes.

The supplied base configuration runs TempleOS with 2GiB of RAM and as many CPU cores as your system has available. You can change this by editing the value of the -m flag in base.conf; the value is in MiB by default. 512MiB is the absolute minimum amount of RAM required for TempleOS to boot.

$ ./run.sh <name>.img

Boots the installed image.

$ ./mount.sh <name>.img
$ cd ./mnt/

This will mount the entirety of the TempleOS filesystem to a mnt directory created in the primary templeos directory. This can be useful for browsing through and editing files that are not contained in Home.

You can run the mount.sh script multiple times; it unmounts the image before trying to mount it again. The run.sh script also unmounts the image before running the VM. You usually don't have to unmount it manually, but if you need to you can always do umount ./mnt/.

Sources net.conf and runs Shrine with networking enabled.

Requires installing TinkerOS and setting the graphical display mode to 15 during installation.

Sources text.conf and runs TinkerOS in the text-only 15th mode.

• NOTE: the sync.sh script does not currently work with TinkerOS or ShrineOS; you need to use mount.sh to interact with their filesystems

The subcommand (temple or host) denotes the target of the sync operation.

$ ./sync.sh temple <name>.img

$ ./sync.sh host <name>.img

Themes are stored in the Themes folder in the Home directory. Edit SetTheme(); in HomeSys.HC file to source the theme of your choice on each boot. The default selection is gruvbox-light.

To change theme instantly, use ThemeManager.HC's SetTheme(); command (both created by Boketto).

#include "~/Themes/ThemeManager.HC";
SetTheme(); // no arguments to list all available themes
SetTheme("nord"); // name an available theme to set it
SetTheme("all"); // "all" cycles through all themes

Current theme choices are:

• badwolf

• base16

• blaquemagick

• catppuccin

  • frappe

  • latte

  • macchiato

  • mocha

• dracula

• gruvbox

  • dark and light

• nord

• rosé pine

  • base, moon, and dawn

• solarized

  • dark and light

• xterm

Change the TEMPLEOS_ISO variable in base.conf to either TinkerOS.ISO or Shrine.ISO, then use the install and run scripts as described above.

• Try out some TempleOS forks! There's TinkerOS from tinkeros/TinkerOS, Shrine from minexew/Shrine, and ZealOS from Zeal-Operating-System/ZealOS.

• Check out Jeff Irwin's temple-viewer STL viewing application! It's really neat.

• You can install the Screenfetch application by doing the following:

  • Download Screenfetch.ISO.C from the cia-foundation

  • Remove the .C extension and run QEMU with the -cdrom flag and the location of the .ISO. If you move the Screenfetch.ISO into the templeos directory, the full command would be something like:

  qemu-system-x86_64 -display gtk,zoom-to-fit=on -rtc base=localtime -cdrom Screenfetch.ISO -enable-kvm -m 2048 -smp $(nproc) -hda custom.img

  This will start TempleOS (or a fork that you installed) with the Screenfetch.ISO mounted to the T: drive

  • Copy the contents of the auto-mounted .ISO in TempleOS by performing the following command:

    CopyTree("T:", "::/Apps/Screenfetch");

    This will automatically create the folder C:/Apps/Screenfetch and populate in with the contents of the .ISO

  • Add another #include to your HomeSys.HC that sources "::/Apps/Screenfetch/Screenfetch.HC.Z"

  • You will now have access to the Screenfetch; command on every subsequent boot

  • **NOTE** For ShrineOS running with networking, all you need to do is pkg-install screenfetch and then source in your HomeSys.HC as above

• To force TempleOS (and ShrineOS) to run at 60FPS, edit the values of WINMGR_FPS and WINMGR_PERIOD in C:/Kernel/KernelA.HH.Z at lines 1478 and 1479 to 60000.0/1001 and 1001/60000.0, respectively (this is just changing the 3 to a 6). Jumping to a line can be done quickly by using the keyboard shortcut <Ctrl+g>, entering the desired line number, then pressing <Esc>

  • **NOTE** Changing the framerate does not seem to work in TinkerOS

• If you install TinkerOS.ISO and set at least one of your drives' graphics mode to 15 during installation, you can then change the -display gtk setting in base.conf to -display curses and get a nice text-only version that works inside of a terminal or TTY

• You can use the TOSZ application made by Terry to uncompress HC.Z files (Linux only)

  • chmod +x make_tosz, then run it in the same directory as TOSZ.CPP to make the TOSZ executable

  • Run TOSZ on the file you wish to uncompress (for example: ./TOSZ -ascii MakeHome.HC.Z)

• Here's handy tip from Jeff Irwin on changing the default keyboard layout to Dvorak (via Reddit):

Open up C:/Kernel/SerialDev/Keyboard.HC.Z with the editor Ed. The first several lines are like this:

asm {

NORMAL_KEY_SCAN_DECODE_TABLE::
   DU8 0,CH_ESC,"1234567890-=",CH_BACKSPACE,'\t';
   DU8 "qwertyuiop[]",'\n',0,"as";
   DU8 "dfghjkl;'\`",0,"\\zxcv";
   DU8 "bnm,./",0,'*',0,CH_SPACE,0,0,0,0,0,0;
   DU8 0,0,0,0,0,0,0,0,0,0,'-',0,0,0,'+',0;

SHIFT_KEY_SCAN_DECODE_TABLE::
   DU8 0,CH_SHIFT_ESC,"!@#$$%^&*()_+",CH_BACKSPACE,'\t';
   DU8 "QWERTYUIOP{}",'\n',0,"AS";
   DU8 "DFGHJKL:\"~",0,"|ZXCV";
   DU8 "BNM<>?",0,'*',0,CH_SHIFT_SPACE,0,0,0,0,0,0;
   DU8 0,0,0,0,0,0,0,0,0,0,'-',0,0,0,'+',0;

Keep the asm { part, but replace the QWERTY tables with this:

NORMAL_KEY_SCAN_DECODE_TABLE::
   DU8 0,CH_ESC,"1234567890[]",CH_BACKSPACE,'\t';
   DU8 "',.pyfgcrl/=",'\n',0,"ao";
   DU8 "euidhtns-\`",0,"\\;qjk";
   DU8 "xbmwvz",0,'*',0,CH_SPACE,0,0,0,0,0,0;
   DU8 0,0,0,0,0,0,0,0,0,0,'-',0,0,0,'+',0;

SHIFT_KEY_SCAN_DECODE_TABLE::
   DU8 0,CH_SHIFT_ESC,"!@#$$%^&*(){}",CH_BACKSPACE,'\t';
   DU8 "\"<>PYFGCRL?+",'\n',0,"AO";
   DU8 "EUIDHTNS_~",0,"|:QJK";
   DU8 "XBMWVZ",0,'*',0,CH_SHIFT_SPACE,0,0,0,0,0,0;
   DU8 0,0,0,0,0,0,0,0,0,0,'-',0,0,0,'+',0;

If you're copy/pasting, great! If you're typing it manually, be careful to escape the double quote in the shift table like \". There's a Ctrl key table too which I haven't bothered editing yet.

Finally, recompile with BootHDIns; and Reboot;

This would, of course, also apply to any other keyboard layout you wish to map (AZERTY, QWERTZ, etc.)