Open-source Windows and Office activator featuring HWID, Ohook, KMS38, and Online KMS activation methods, along with advanced troubleshooting.

Using AD9833 Signal Generator with Arduino.

The program integrates two sensors and pumps, namely a water pressure sensor and a flow sensor. The flow rate and pressure can be read through a personal computer, and the pump speed percentage (P…

Use the resistive divider to calculate the unknown resistor, and use the average filter to smooth the value.

The output voltage of the sensor is converted by ADC to obtain the ph value.

Calculate the number of unit pulses per interval to convert the water flow rate (mL/minute).

The output voltage of the sensor is converted by ADC to obtain the water pressure.

The program integrates two sensors and pumps, namely a water pressure sensor and a flow sensor. The flow rate and pressure can be read through a personal computer, and the pump speed percentage (PW…

The program integrates two sensors and pumps, namely a water pressure sensor and a flow sensor. The flow rate and pressure can be read through a personal computer, and the pump speed percentage (PW…

Set the pump speed percentage (PWM) through the serial port and I2C from another MCU.

The program integrates two sensors and pumps, namely a water pressure sensor and a flow sensor. The flow rate and pressure can be read through a personal computer, and the pump speed percentage (PW…

The program integrates two sensors and pumps, namely a water pressure sensor and a flow sensor. The flow rate and pressure can be read through a personal computer, and the pump speed percentage (PW…

This program integrates two sensors, a water pressure sensor and a flow sensor, which can be read and communicated via a personal computer.

Use interrupts to calculate the number of unit pulses per interval to convert the water flow rate (mL/minute).

The output voltage of the sensor is converted by ADC.