5.6" Display & Audio 1280x800 (720p) Kit - HDMI/VGA/NTSC/PAL
Qty | Discount |
---|---|
1-9 | $149.95 |
10-99 | $134.96 |
100+ | $119.96 |
Description
Make a lovely audio/video setup with a 5.6" 720p screen with HDMI stereo speaker support. For video, we have a super-sharp 5.6" TFT display with incredibly high resolution - it has 270 PPI! We tried to get the smallest & highest resolution display that would be good for embedded computing usage. The visible display measures 5.6" diagonal and is a 'raw' LVDS display as is used in a tablet, ultra thin with some mounting tabs around the edge. We include a driver board with HDMI, VGA and Composite inputs as well as stereo 4 ohm at 3W output driving capability. The setup is very easy to use - simply connect a 5-12VDC adapter to the 2.1mm center-positive DC jack, then connect a digital video source to one of the ports and two 4 to 8 ohm speakers to the SPK output pins. Voila, a display! This embedded content is from a site (www.youtube.com, flickr.com, etc) that does not comply with the Do Not Track (DNT) setting now enabled on your browser. Clicking through to the embedded content will allow you to be tracked by the embed provider.
It is not an IPS display so its best for direct viewing, our 7" and 10" HDMI displays are IPS so they look great from any angle.
There's a little wired PCB with little buttons that let you enter a menu system for adjusting brightness, color and contrast. It tries to auto-detect which input you have and switches to that one or you can 'select' from the menu keypad which to display.
We include a plug-in cable that connects to the 4 speaker output pins, the pins are labeled LOUT+/- and ROUT+/- you'll have to solder your own speakers to the 4 wires
To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any device with HDMI, VGA or NTSC/PAL output. It will not work with a device that only outputs DVI (without a DVI->HDMI converter) or SECAM.
For use with a BeagleBone black, we found it works when plugged in, no configuration required.
A power adapter is not included! Any 5 to 12VDC adapter will work nicely: we prefer 9V DC. Check the technical tabs for current draw at various voltages. We show the display on a bent wire stand which is not included, but you can pick one up here
5.6" Display & Audio 1280x800 (720p) Kit - HDMI/VGA/NTSC/PAL (15:20)
Technical Details
- Driver Datasheet
- Keyboard Datasheet
- Power with 5-24VDC
- 16:10 display ratio
- Resolution: 1200 x 800
- Visible area: 121mm x 76mm 16:10
- Brightness: 300cd/m2
- Contrast: 400:1
- We ship with an LTD056EV7F display, or equivalent, however we don't have a datasheet for this exact display
- Display dimensions: 140mm x 89mm x 3mm
- Not HDCP compatible - it cannot be used with 'secured' HDMI sources
Power draw from combined display+HDMI driver when backlight is on
- 5V: 650mA
- 6V: 550mA
- 7V: 450mA
- 8V: 400mA
- 9V: 350mA
- 10V: 325mA
- 11V: 300mA
- 12V: 275mA
Driver details:
- Board Dimensions: 90mm x 66mm (3.5" x 2.6")
- Weight: 60g
Learn

